海藻酸钙微胶囊的制备

研究了海藻酸钙微胶囊的制备条件和影响因素。试验结果表明 :海藻酸钠浓度不宜超过 3.0 % ,Ca Cl2的浓度为 1.0 %～ 4 .0 % ,适宜转速为 30 0 r· min- 1 ,下滴速率可控制在 6 0～ 90滴· m in- 1 ,成型的微胶囊浸泡在蒸馏水中存放 30 d后变化不大     

Poly(pyridine-2,5-diyl)–CuCl2 catalyst for synthesis of dimethyl carbonate by oxidative carbonylation of methanol: catalytic activity and corrosion influence

A -conjugated polymer, poly(pyridine-2,5-diyl) (PPy) was investigated as a support for CuCl₂ in the synthesis of dimethyl carbonate by oxidative carbonylation of methanol. The PPy–CuCl₂ adduct had high catalytic activity which was comparable to that of the homogeneous CuCl₂ catalyst. The adduct caused corrosion of stainless-steel vessels only to minor extent, compared with the homogeneous CuCl₂ catalyst. This PPy–CuCl₂ catalyst was easily recycled by filtration and showed a similar catalytic activity in the third time use. The presence of the -conjugated system in PPy, through which electrons can move, may bring about the high catalytic activity for the oxidative carbonylation of methanol, which involves Cu(II)/Cu(I) redox processes.     

盘式干燥机在高纯碳酸钡生产中的应用

对盘式干燥机的工作原理、结构特点进行了详细介绍，并将其它干燥设备和盘式干燥机作了对比，指出高纯碳酸钡行业采用盘式干燥机可以将生产成本降到最低限度，而产品质量可以得到很大提高。盘式干燥机也可用于高纯碳酸锶、硫酸钡等粘性物料的干燥，效果也非常理想，应用前景广阔。     

Estimation of Concentration of Particles in Polymerizing Fluid during Centrifugal Casting of Functionally Graded Polymer Composites

The concentration of uniformly distributed particles in a fluid changes with time in the direction of gravitational or centrifugal force to form a concentration gradient. The change in the concentration is an outcome of velocity variation of particles in a fluid. A modified equation for terminal velocity, v _m of particles in polymerizing-fluid under centrifugal force is proposed to estimate the changes in the volume fraction of particles in the graded composites. The proposed equation introduces the effect of cure kinetics of polymer and its effect on particle movement in the model that was based on the modified Stoke’s law, considering the parameters related to particle hindrance, centrifugal force, particle dimensions, viscosity variation etc. The model predictions of concentration changes at the different locations of samples were compared with calcium carbonate filled polysulphide-modified-epoxy graded composites prepared by centrifugal casting.. The effect of particle size, delayed curing rate of matrix were explored. The simulated results are in good agreement with those of experiments.     

水热法解聚钠硼解石制备硼酸钙

以钠硼解石天然矿粉为原料，经水热解聚和相转化制备出硼酸钙产品。通过化学分析、XRD及TG—DTG分析表明：产品中的物相主要是白硼钙石（4CaO·5B2O3-7H2O）、硬硼钙石（2CaO·3B2O3·5H2O）和羟硼钙石（3CaO·2B2O3·9H2O）。实验确定了适宜的工艺条件，即：反应体系液固体积质量比为2．5mL／g左右；解聚温度120℃；解聚时间8h左右；干燥温度在200℃左右。在此工艺条件下制得的硼酸钙产品的氧化钠质量分数在0．5％以下，很好地满足了无碱玻璃纤维工业对含硼原料的要求。     

高温下 CaS氧化反应特性的实验研究

采用热重等温实验研究了970～1150℃内CaS的氧化反应特性,利用红外光谱仪定量分析反应析出SO2气体,通过亚甲基蓝分光光度法测定固体残留物中CaS的含量.实验研究发现,在970～1150℃内,反应呈先失重后增重趋势,固体残留物中都检测出少量CaS的存在.随温度升高,残留固体样品中CaSO4的质量百分比下降,而CaO的质量百分比上升,SO2析出速率急剧增大,1150℃下SO2的析出速率比970℃下的析出速率高了一个数量级.随O2浓度增大,残留固体样品中CaSO4的质量百分比和SO2析出速率轻微上升.降低反应温度和增大O2浓度,有利于提高CaS氧化生成CaSO4的比例.     

Barium Carbonate Phase on the Surfaces of Barium Titanate Particles and in Situ Transmission Electron Microscopy Observation of Its Decomposition

A BaCO₃ phase is found on the surfaces of hydrothermally synthesized BaTiO₃ particles; it occurs as aggregates or small protuberances. A small proportion of the phase decomposes to BaO crystallites when heated by a convergent electron beam in a transmission electron microscope. The BaO and BaCO₃ crystallites disappear when they are irradiated successively by the convergent electron beam. The BaO crystallites and the BaCO₃ phase sublimate and/or react with BaTiO₃ crystals whose surface layers are deficient in Ba²⁺ ions.     

碳酸钙对乙烯-丙烯酸丁酯共聚物阻燃与力学性能及热降解行为影响研究

采用极限氧指数法、热重分析和差示扫描量热分析等研究了碳酸钙（CaCO3）对乙烯-丙烯酸丁酯共聚物（EBA）阻燃及热降解行为的影响，探讨了CaCO3对EBA力学性能和熔体流动速率的影响。结果表明，CaCO3降低了EBA的拉伸强度、断裂伸长率和熔体流动速率，但复合阻燃材料仍具有良好的加工性能；当CaoCO3含量为60％（质量分数，下同）时，阻燃材料的极限氧指数可达28．5％。CaCO3通过EBA在热降解过程中与之发生化学反应来改变EBA的热降解行为，提高在高温下的热稳定性，降低EBA的热降解速率，促进高温下成炭在凝缩相中发挥阻燃作用。此外，CaCO3与EBA在热降解过程中形成隔热、隔氧的多孔泡沫膨胀结构，可进一步加强阻燃效果。     

Electrochemical characteristics of phase-separated polymer electrolyte based on poly(vinylidene fluoride-co-hexafluoropropane) and ethylene carbonate

A polymer electrolyte based on microporous poly(vinylidene fluoride-co-hexafluoropropane) (PVdF-HFP) film was studied for use in lithium ion batteries. The microporous PVdF-HFP (Kynar 2801) matrix was prepared from a cast of homogeneous mixture of PVdF-HFP and solvents such as ethylene carbonate (EC), dimethyl carbonate (DMC), and ethyl methyl carbonate (EMC). After evaporation of DMC and EMC, a sold film of the PVdF-HFP and the EC mixture was obtained. EC-rich phase started its formation in the PVdF-HFP/EC film at EC content of about 60 wt.% based on the total weight of PVdF-HFP and EC. The formation of the new phase resulted in the abrupt increase of the porosity of the PVdF-HFP matrix from 32 to 62%. The ionic conductivity of the film soaked in 1 M LiPF₆-EC/DMC=1/1 was significantly increased from order of 10⁻⁴ S/cm to order of 10⁻³ S/cm at the EC content of 60 wt.%. Thermal and spectroscopic investigations showed that most of the EC interact with PVdF-HFP with the EC content being below 60 wt.%. MCMB/polymer electrolyte/LiCoO₂ cells employing the microporous PVdF-HFP polymer film showed stable charging/discharging characteristics at 1C rate and good rate capability.     

碳酸二甲酯市场现状及技术进展

目前,全球碳酸二甲酯(DMC)的产量约为12万t/a。生产方法有光气法、酯交换法、甲醇氧化羰基法和二氧化碳-甲醇直接合成法。我国DMC产量不足3万t/a,主要采用酯交换法和甲醇液相氧化羰基法。DMC可作为羰基化试剂代替剧毒物质光气用于合成聚碳酸酯、异氰酸酯、杀虫剂西维因等,用作甲基化试剂代替致癌物硫酸二甲酯合成苯甲醚。