改性钢渣除藻效果研究

对改性钢渣在机械搅拌条件下的除藻效果进行了研究,并分析了改性钢渣预处理与混凝联用工艺对藻类的去除效果和协同作用.实验表明,钢渣经改性后,既能有效地去除水中的藻类,又能降低藻的光合活性,抑制藻的生长;高温活化改性钢渣预处理与混凝联用工艺对藻类有很好的去除效果,其对叶绿素a的平均去除率达91.4％,远高于单纯的钢渣预处理和混凝工艺.这暗示了两者之间在除藻方面存在协同作用.     

小型转炉溅渣护炉实践

马钢第二钢轧总厂炼钢分厂通过分析影响溅渣护炉操作的几个重要因素,通过优化终渣调整和溅渣枪位等措施,提高溅渣护炉应用效果,降低耐材消耗,增强了生产的平稳性,取得了显著的经济效益。     

Valorization of Al slag in the production of green ceramic tiles: Effect of experimental conditions on microstructure and crystalline phase composition

This work reports the results of an investigation aimed at the development of sintered glass-ceramic tiles by the sinter-crystallization of mixtures composed of aluminum slag and reclaimed packaging glass. The thermal behaviors of mixtures incorporating 50 and 60 wt% Al slag were established by differential thermal analysis (DTA). Green compacts were sintered in a temperature range of 800°C-1050°C and then soaked for 10-60 minutes. The mineralogical characterizations of the sintered materials were obtained by X-ray diffraction (XRD). The achieved results indicated that the sintering of aluminum slag and packaging glass reclaimed led to a glass-ceramic material composed mainly of needle-like crystals of wollastonite (CaSiO₃). The bloating of samples during firing was evaluated according to a Cougny predictive diagram. After initial observations and according to bending strength characterizations, sintered tiles prepared from aluminum slag and glassy sand are appropriate for floor pavement and wall covering.     

高韧性自保护药芯焊丝

采用正交设计方法，研制出一种新氟钙钛渣系（ＣａＦ２－ＴｉＯ２－ＭｇＯ）的自保护药芯焊丝，其焊接工艺性能良好，烟雾少，并且熔敷金属组织均匀，细小，塑性和低温韧性高，是与５５０ＭＰａ级低合金高强钢相匹配的一种高效焊接材料，适于野外焊接重要结构。     

EFFECTS OF NUCLEATION AGENTS ON EFFICIENCY OF BORON EXTRACTION FROM MgO－B_2O_3－SiO_2 SLAGS

ＥＦＦＥＣＴＳＯＦＮＵＣＬＥＡＴＩＯＮＡＧＥＮＴＳＯＮＥＦＦＩＣＩＥＮＣＹＯＦＢＯＲＯＮＥＸＴＲＡＣＴＩＯＮＦＲＯＭＭｇＯ－Ｂ_２Ｏ_３－ＳｉＯ_２ＳＬＡＧＳ￥Ｚｈａｎｇ，Ｐｅｉｘｉｎ；Ｌｏｕ，Ｈａｉｌｉｎｇ；Ｓｕｉ，Ｚｈｉｔｏｎｇ（Ｄｅｐａｒｔｍｅｎ?..     

A FUZZY NEURAL NETWORK DECISION MODEL ON THE OPERATION PROCESS OF ELECTRIC FURNACE FOR CLEANING SLAG AND ITS APPLICATION

ＡＦＵＺＺＹＮＥＵＲＡＬＮＥＴＷＯＲＫＤＥＣＩＳＩＯＮＭＯＤＥＬＯＮＴＨＥＯＰＥＲＡＴＩＯＮＰＲＯＣＥＳＳＯＦＥＬＥＣＴＲＩＣＦＵＲＮＡＣＥＦＯＲＣＬＥＡＮＩＮＧＳＬＡＧＡＮＤＩＴＳＡＰＰＬＩＣＡＴＩＯＮ￥Ｐｅｎｇ，Ｘｉａｏｑｉ；Ｍｅｉ，Ｃｈｉ；Ｚｈ...     

药芯焊丝电弧焊电弧形态与熔滴过渡行为的研究

基于数码照相技术研究了CO2保护气氛下,渣系和焊接参数对药芯焊丝电弧焊（FCAW）电弧形态和熔滴过渡行为的影响。研究发现,酸性及金属芯渣系药芯焊丝在所有焊接参数下电弧扩散角相差不大,碱性渣系药芯焊丝因药芯中含大量消电离元素,大焊接参数下电弧扩散角比其它两种渣系小;金属芯药芯焊丝大焊接参数下发生“半潜弧”,可见弧长显著缩短。随着焊接参数增大,酸性,碱性,金属芯药芯焊丝均依次出现如下熔滴过渡类型;短路过渡、大滴排斥过渡、细颗粒过渡,均未发生喷射过渡。     

Nb_2O_5-MnO-SiO_2渣中Nb_2O_5和MnO活度的研究SCIEI

本文利用含NbFe液与Nb_2O_5-MnO-SiO_2渣之间平衡,在1828K温度下应用固体电解质浓差电池方法测定了Fe液中氧的活度,从而计算出渣中Nb_2O_5及MnO的活度,并绘制了Nb_2O_5-MnO-SiO_2三元系的等α_(Nb_2O_5)和等α_(MnO)图。     

高炉低钛渣脱硫的动力学研究SCIEI

研究了高炉低钛渣脱硫的动力学,用扫描电镜初步研究了硫在渣铁界面附近的分布。结果表明,在无搅拌条件下,脱硫反应为一级反应;硫在渣中扩散为脱硫反应过程的限制环节,提出了提高脱硫反应速度的措施。     

铝电解槽大修渣场污染防范措施

针对铝电解槽大修渣淋溶液具有毒性 ,处理不慎将污染地下水环境的情况 ,以遵义电解铝厂的电解渣场设计为例 ,指出只要对电解渣场做好防渗处理 ,即可解决电解渣淋溶液对地下水环境的污染问题。