A polydispersed particle system representation of the porosity for non-saturated cementitious materials

In this paper, the porosity of cementitious materials is described in terms of pore size distribution by means of a 3-dimensional overlapping sphere system with polydispersivity in size. On the basis of results established by Lu and Torquato [B. Lu, S. Torquato, Nearest-surface distribution functions for polydispersed particle systems, Phys. Rev. A 45(8) (1992) 5530-5544] and Torquato [S. Torquato, Random Heterogeneous Media: Microstructure and Macroscopic Properties. Springer-Verlag: New York, 2001] providing relations for nearest-neighbor distribution functions, the volume fraction of pores having a radius larger than a prescribed value is explicitly expressed. By adopting an appropriate size distribution function for the sphere system, it is shown that the pore size distribution of cementitious materials as detected for instance by mercury intrusion porosimetry (MIP), which generally points out several pore classes, can be well approached. On the basis of this porosity representation, the evaluation of the capillary pressure in function of the saturation degree is provided. The model is then applied to the simulation of the saturation degree versus relative humidity adsorption curves. The impact of the pore size distribution, the temperature and the thickness of the adsorbed water layer on these parameters are assessed and analyzed for three model materials having different pore characteristics.     

压裂泵往复密封性能及机理研究

根据流体动压润滑理论，对压裂泵柱塞密封摩擦副的润滑机理进行了理论分析。在排出和吸入行程，柱塞密封摩擦副均能满足流体动压润滑的条件，即在柱塞与密封界面上能形成并保持一定厚度的油膜润滑密封，从而达到减小摩擦提高寿命的目的；建立了摩擦界面油膜厚度和泄漏量的计算公式。利用有限元法理论，对密封圈的压力沿轴向的分布规律、泄漏量与压力变化关系进行了模拟计算。对往复密封圈沿轴向压力分布、泄漏量随压力变化进行了测试；试验结果表明，建立的计算模型具有较高的计算精度，揭示了压裂泵的密封机理。     

Directional features in online handwriting recognition

The selection of valuable features is crucial in pattern recognition. In this paper we deal with the issue that part of features originate from directional instead of common linear data. Both for directional and linear data a theory for a statistical modeling exists. However, none of these theories gives an integrated solution to problems, where linear and directional variables are to be combined in a single, multivariate probability density function. We describe a general approach for a unified statistical modeling, given the constraint that variances of the circular variables are small. The method is practically evaluated in the context of our online handwriting recognition system frog on hand and the so-called tangent slope angle feature. Recognition results are compared with two alternative modeling approaches. The proposed solution gives significant improvements in recognition accuracy, computational speed and memory requirements.     

辽河减压渣油中金属铁的赋存与分布特征

考察了辽河减渣在吸附分离、酸性溶液萃取和沥青质轻度降解过程中金属铁的分布和转移情况。结果表明，辽河减渣中有近90％的铁富集在胶质和沥青质中，部分铁以侧链较短的环烷酸盐或酚盐形式存在，部分铁连接在沥青质分子的侧链上，或是被包裹在沥青质大分子中。     

Optimal production-inventory policy for make-to-order versus make-to-stock based on the M/Er/1 queuing model

This paper analyzes a multi-product production / inventory system where demands for each item arrive according to a Poisson process and the production time for each product has an Erlang distribution. The paper proposes an optimality condition that specifies whether each product should be produced make-to-stock or make-to-order. In the event a product should be produced make-to-stock, an approach for computing the optimal base-stock level is proposed. Numerical examples are given for illustrative purpose.     

Use of the Extreme Groups Approach: A Critical Reexamination and New Recommendations.

Analysis of continuous variables sometimes proceeds by selecting individuals on the basis of extreme scores of a sample distribution and submitting only those extreme scores to further analysis. This sampling method is known as the extreme groups approach (EGA). EGA is often used to achieve greater statistical power in subsequent hypothesis tests. However, there are several largely unrecognized costs associated with EGA that must be considered. The authors illustrate the effects EGA can have on power, standardized effect size, reliability, model specification, and the interpretability of results. Finally, the authors discuss alternative procedures, as well as possible legitimate uses of EGA. The authors urge researchers, editors, reviewers, and consumers to carefully assess the extent to which EGA is an appropriate tool in their own research and in that of others. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

准噶尔盆地腹部超压层分布研究

准噶尔盆地腹部普遍发育深层（大于4000m）超压系统，很多钻井都钻遇超压。通过对超压段钻井、地质、测井、地震特征系统研究发现，超压段泥浆密度大幅增加，具有高声波时差、低电阻率以及地震低速的超压响应特征。利用Dix公式计算地震层速度和利用Fillippone公式计算地层压力，得到超压数据体。准噶尔盆地腹部超压在白垩系及其以下沉积地层中均有分布，超压层的深度范围不同。分1井西凹陷边缘以及昌吉凹陷西南有空层现象。超压顶面分布的层位由北往南、从东到西逐渐变浅，从三叠系顶部到白垩系底部。深部超压对油气分布和富集有着重要的控制作用，准噶尔盆地腹部超压层分布的研究将对本区油气勘探起积极的推动作用。     

Three-parameter vs. two-parameter Weibull distribution for pultruded composite material properties

The three-parameter and two-parameter Weibull distributions are compared using 26 mechanical property data sets of fiber-reinforced polymeric (FRP) composite materials manufactured by the pultrusion process. Both strength and stiffness properties were examined. The probability distributions were compared on the basis of goodness of fit, nominal design values, and allowable load to achieve uniform reliability. It is recommended that the two-parameter Weibull distribution be used to characterize FRP composite material properties. The primary basis for this recommendation is small differences in nominal design values and small differences in allowable loads between the two-parameter and three-parameter Weibull distributions. Other supporting reasons for the recommendation are similar observed significance levels in distribution fitting, computational efficiency, and the fact that the location parameter of the three-parameter Weibull distribution is near the first order statistic.     

配网侧接入电源对负荷建模的影响

研究了配网侧接入电源对负荷建模的影响。发现当配网侧电源的发电容量逐渐增大时，原有的感应电动机并联恒阻抗、恒电流、恒功率（ZIP）模型的负荷模型将不再能很好地反映该区域的负荷特性，进而提出了一种新的负荷模型结构———异步发电机并联ZIP模型。通过仿真计算，验证了该新负荷模型的有效性，并进一步统一了上述2种负荷模型，称为异步机并联ZIP负荷模型。     

非均质储层模型微观水驱油实验

储层的非均质性不但普遍存在，而且是影响注水开发油藏水驱效率和开发后期剩余油分布的重要因素。利用微观模型水驱油实验，研究了横向、纵向及平面共6种非均质模型在不同注采方式下微观水驱油机理。针对不同非均质模型和注采方式下剩余油分布特点，研究了改变注采方向和驱替压力对提高水驱采收率的影响。改变注采方向后，横向和平面非均质模型采收率分别提高了2．89％和5．42％；对于纵向非均质模型，首次低注高采改变为高注低采后提高采收率3．72％，反之提高了1．26％。提高驱替压力后，横向及纵向非均质模型的采收率分别提高了35．65％和31．26％，平面非均质模型只提高了8．10％。