二芳基碘鎓盐型阳离子光引发剂的 合成和光引发性能测试

通过两步反应合成了6种二芳基碘鎓盐, 研究了4,4′－二乙酰胺基苯基碘六氟磷酸盐的合成,确定了最佳工艺条件：乙酰苯胺与碘酸钾的摩尔比为2.2∶1.0,15 ml乙酸在25 ℃反应24 h,产率为47.6%。通过应用实验,测试了6种产物的光引发剂性能,对碘鎓盐光引发剂的构效关系进行了探讨。实验证明4种负离子为PF-6和BF-4的产物具有较好光引发性和抗氧阻能力。引入共轭基团的二芳基碘鎓盐其最大吸收波长明显增大,光引发性增强。     

无机盐对新疆油田三元复合驱界面性能影响研究

界面性能对复合驱提高采收率有重大的影响,界面张力越低,洗油效率越高;Zeta电位越高,油水乳状液越稳定。研究了各类无机盐对新疆油田复合驱界面性能的影响。结果显示,Zeta电位的绝对值随着无机盐浓度的增高而增大;无机碱中,碳酸根离子降低界面张力效果最好,氢氧根次之,碳酸氢根最差;阳离子中,钾离子降低界面张力效果最好,其次是钠离子,镁离子会略微提高界面张力,钙离子则会大幅度提高界面张力;阴离子中,与硫酸根相比,氯离子能更好地降低界面张力。通过以上研究,确定了Q站污水处理站外排水更适合三元复合驱配液。     

季胺萃取锌的动力学研究

以恒界面池法研究了氯化物介质中季胺萃锌的动力学。考查了搅拌转速、传质界面积和温度对萃取速率的影响，判定季爱萃锌为界面化学反应的动力学模式。进一步研究了季胺萃取剂浓度和水相Ｚｎ＾２＋浓度对萃取速率的影响，得到了与理论推断相吻合的速率方程。     

新型纳米固载杂多酸盐催化剂的制备与应用

采用超声波法制备纳米级杂多酸盐催化剂 ,通过己酸乙酯的合成反应来检验它们的活性。实验表明 ,醇酸比为 1 .1 5∶ 1 ,催化剂用量为反应物总质量的 1 %,反应时间 2 h,反应温度在 92～96°C时 ,己酸乙酯的产率可达 92 %。     

Effects of substituted aromatic heterocyclic phosphate salts on properties,crystallization, and melting behaviors of isotactic polypropylene

Nucleation effects of 2,2′‐methylene‐bis (4,6‐di‐tert‐butylphenyl) phosphate metal salts as a nucleating agent for isotactic polypropylene (iPP) were investigated with differential scanning calorimeter and polarized optical microscope, and their effects on mechanical, optical, and heat resistance properties of iPP were also studied. The results showed that monovalent metal salts of substituted aromatic heterocyclic phosphate such as sodium salt, lithium salt, and potassium salt had a good performance. With 0.2 wt % of sodium salt, lithium salt, or potassium salt incorporated into iPP, the crystallization peak temperature of iPP could be increased by 13.5, 13.6, and 15.0°C, respectively; the mass fraction of crystallinity of iPP could be increased by about 5%; and crystallization rate was enhanced increasingly. Meanwhile the tensile strength and flexural modulus of iPP could be increased by about 10 and 30%, respectively, and the clarity and heat distortion temperature of iPP could also be improved significantly. But bivalent and trivalent metal salts of substituted aromatic heterocyclic phosphate had little effect on properties of iPP. Meanwhile the morphology study showed that the addition of monovalent sodium salt could decrease the spherulite size of iPP significantly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4868–4874, 2006     

国外过氧化氢在化学合成中应用研究进展

介绍了近期国外过氧化氢在部分化学品合成中应用研究新进展 ,产品包括过碳酸钠、过碳酰胺、4Na2 SO4·2H2 O2 ·NaCl加合物、叔胺氧化物、水合肼、二羟基苯、季铵盐过氧化氢和甲乙酮肟。内容涉及产品质量 (纯度、安定性、溶解速率、外观等 )、产品收率、催化剂、工艺过程等方面改进。主要介绍专利技术。     

Syntheses of TiO2 photocatalysts by the molten salts method: Application to the photocatalytic degradation of Prosulfuron

Titania photocatalysts were synthesised by the molten salts method by reaction of a titanium precursor with three different alkali metal nitrates (LiNO₃, NaNO₃, KNO₃). The titania powders obtained have been characterised using TEM, XRD, BET and UV-Vis absorption spectroscopy. Their photoactivities were evaluated by degrading a commercial sulfonylurea herbicide, Prosulfuron^®. It has been found that the rate constants increased in the following order: Li2 prepared in KNO₃, with a rate constant 1.4 times smaller than that of P25. The effect of calcination was also studied, especially for the sample prepared in NaNO₃ (TiO₂[Na]). An improvement in photocatalytic activity was observed when TiO₂[Na] was calcined in the region of 700–800 °C. Even though the photocatalytic activities obtained did not exceed or even equal to that of Degussa P25, nevertheless, this study constitutes the first attempt to synthesise titania photocatalysts by the molten salts method.     

Liquid-liquid equilibrium for the quaternary system of o-xylene(1)+water(2) +propionic acid(3)+1-butanol(4) at 298.15 K and atmospheric pressure

The liquid-liquid equilibrium for the quaternary system of o-xylene(1)+water(2)+propionic acid(3)+1-butanol(4) was measured at 298.15 K and atmospheric pressure. Binodal curves, tie-lines, a distribution curve, and a selectivity curve for the quaternary system have been determined in order to investigate the effect of binary solvents, oxylene and 1-butanol, on extracting propionic acid from aqueous solution. In addition, these experimental tie line data were also compared with the values predicted by the UNIFAC model. In this study, the UNIFAC model was capable of predicting the compositions of this quaternary system within an average RMSD of 1.13 mol%. This paper was prepared at the 2004 Korea/Japan/Taiwan Chemical Engineering Conference held at Busan, Korea between November 3 and 4, 2004.     

二元混合氯化盐的配制及热物性研究

在太阳能热发电技术中,硝酸盐类相变材料是使用最多的一种相变材料,但其最高使用温度仅为600 ℃,因此找到一种热容量大、工作温度范围宽、热损失低、价格便宜的相变储热材料是目前的研究重点。选取氯化锂和氯化钠两种高温熔盐相变材料按照不同的质量比混合制备了9种二元熔盐混合物,利用差式扫描量热仪（DSC）对其在600 ℃范围内的相变温度和相变潜热进行了研究。实验结果显示：由于氯化钠的熔点较高,当氯化锂和氯化钠的二元混合物中氯化钠的含量较多时,即氯化锂的含量较少时,少量的氯化锂不能将混合物的熔点降低至600 ℃以下,混合材料无法熔化;当氯化钠和氯化锂发生熔融时,无论何种比例其相变温度均保持在540 ℃左右,浮动±15 ℃;以质量配比为90%氯化锂-10%氯化钠的二元混合物的熔融温度与结晶温度相差较大,所以该二元混合熔盐可以应用于太阳能发电的传热和蓄热技术中。     

聚二烯丙基二甲基季铵盐/丙烯酰胺的制备及其在皮革中的应用

采用单因素实验法,以聚合物在皮革鞣制工艺中应用后坯革收缩温度的增加量为考察指标,从单体配比、单体占总体系的质量分数、反应体系pH、引发剂用量、反应时间等因素对聚二烯丙基二甲基季铵盐/丙烯酰胺(PDM/AM)聚合的合成工艺进行了优化。结果表明:当n(DM)∶n(AM)=1∶3,单体占总体系的质量分数为30%,反应体系pH=5,引发剂用量为4%,反应5 h时,聚合物的产率达91.27%,特性黏度为31.54 mL/g,应用于皮革鞣制工艺中鞣制效应较好。通过红外光谱和X-射线衍射分析等手段对PDM/AM的结构进行表征,结果表明,丙烯酰胺与二烯丙基二甲基氯化铵成功地发生了聚合。