NO分解催化剂Cu/分子筛的ESR研究 Ⅰ.水合铜分子筛的ESR研究

系统地比较了在各种不同制备条件下制得的Ｃｕ／ＺＳＭ－５、Ｃｕ／丝光沸石、Ｃｕ／镁碱沸石和Ｃｕ／毛沸石的ＥＳＲ谱，至少六种水合Ｃｕ物种被发现，而且发现分子筛的腔结构对Ｃｕ物种的存在状态有很大的影响。     

Sonochemical Activation of Al/Ni Hydrogenation Catalyst

This paper proposes a sonochemical approach to the nanostructuring of Al/Ni catalyst with high content of accessible Ni centers and a high reusability. The surface and bulk composition as well as pore size distribution of this catalyst are controlled synergistically by adjusting the ultrasound intensity in aqueous solution. Sonochemical activation of Al/Ni alloy leads to formation of mesoporous Al/Ni metallic based frameworks with surface area up to 125 m² g^?1, and regular distribution of nickel active center in the porous matrix. One of the opportunities of porous Al/Ni catalyst is that due to a time‐resolved controllable formation of protective oxide layer it can be stored and handled under air in comparison to traditional Raney catalysts which need inert conditions. The Al/Ni catalyst is characterized by scanning electron microscopy (SEM), electron diffraction spectroscopy (EDS), X‐ray photoelectron spectroscopy (XPS), confocal scanning fluorescence microscopy (CSFM), solid‐state NMR experiments, and powder X‐ray diffraction analysis (PXRD). The catalytic activity was investigated for the hydrogenation of acetophenone.     

简易式多功能膛口装置结构及其性能指标的计算法

该文介绍一种被命名为内插管扩张型多功能膛口装置.其结构比较简单,且具有消焰、消声、制退和有利于提高射击精度多种功能.本装置各项性能指标的计算法,是采用实验与理论分析相结合建立的经验公式,既可用作正面计算,也可用作多目标函数综合优化设计的反面计算.     

A Composite Formation Route to Well‐Crystalline Manganese Oxide Nanocrystals: High Catalytic Activity of Manganate–Alumina Nanocomposites

Manganese oxide nanocrystals are combined with aluminum oxide nanocrystals to improve their crystallinity via calcination without a significant increase of crystal size. A nanocomposite, consisting of two metal oxides, can be synthesized by the reaction between permanganate anions and aluminum oxyhydroxide keggin cations. The as‐prepared manganese oxide–aluminum oxide nanocomposite is X‐ray amorphous whereas heat‐treatment gives rise to the crystallization of an α‐MnO₂ phase at 600 °C and Mn₃O₄/Mn₂O₃ and γ‐Al₂O₃ phases at 800 °C. Electron microscopy and N₂ adsorption‐desorption‐isotherm analysis clearly demonstrate that the as‐prepared nanocomposite is composed of a porous assembly of monodisperse primary particles with a size of ～20 nm and a surface area of >410 m² g^?1. Of particular interest is that the small particle size of the as‐prepared nanocomposite is well‐maintained up to 600 °C, a result of the prevention of the growth of manganate grains through nanoscale mixing with alumina grains. The calcined nanocomposite shows very‐high catalytic activity for the oxidation of cyclohexene with an extremely high conversion efficiency of >95% within 15 min. The present results show that the improvement of the crystallinity without significant crystal growth is very crucial for optimizing the catalytic activity of manganese oxide nanocrystals.     

三元流叶轮置换技术在聚酯生产中的应用

通过全三元射流-尾迹流动计算得出定量分析,改善叶轮内流动状态,减少进口冲击和出口尾迹脱流等损失,使水泵效率得以提高,真正达到节能降耗之目的。     

液相法合成氢化铝钠的研究

以NaH和AlCl3为主要原料,通过改变实验条件,探索研究液相法合成NaAlH4的合成条件。实验表明,在不加入任何催化剂的情况下无法实现NaAlH4的合成,在以NaAlH4、三乙基铝等物质为催化剂的条件下,虽有少量的产物生成,但是反应不明显,且产物中存在大量的非晶态物质。即便在高温高压下反应亦难以进行,大量的化合物均以非晶态形式存在。     

酯化法合成丙酮酸乙酯的研究

论述了以丙酮酸、乙醇为原料,离子交换树脂作催化剂,催化合成丙酮酸乙酯的新工艺。考察了催化剂种类、用量、原料配比、反应时间以及催化剂使用次数等因素对酯化率的影响,确定了催化剂种类和最佳工艺条件。结果表明,732强酸性离子交换树脂具有良好的催化活性和选择性,可多次重复使用,酯化率可达85.7%,产品质量符合国家标准。     

影响红外反射涂层降温性能的因素

研究了影响红外反射降温涂层的影响因素,分析了涂层颜料体系的特点及提高热辐射能力的方法,提高了涂层的降温能力.     

A Critical Review on Functionalization of Air‐Cathodes for Nonaqueous Li–O2 Batteries

This review reports on the most updated technological aspects of Li–air battery cathode materials. It provides the reader with recent developments, alongside critical views. The requirements for air‐cathodes, as well as the classification and characterization of carbon‐based and carbon‐free air cathodes, are listed. The effects of two major substituent groups of materials, namely carbon and advanced materials (metals, metal‐oxides, metal‐carbides, and metal‐nitrides) aimed at replacing carbon, are discussed in terms of their chemical and electrochemical stability. The report covers aspects of surface chemistry and structure influence on the electrolyte and discharge products stability. The review also reports on the efforts to suppress side reactions and deterioration of the polymeric binders (if a composite electrode is being considered). This is recognized as a means to enhance Li–air battery performance. The report concludes with an outlook and perspective, providing the readers with some insight on other factors and their impact on the long road toward a viable air‐cathode suitable for Li–air battery operations.