环戊二烯及其在涂料,胶粘剂中的应用

本文阐述了环戊二烯的性质，化学反应特点及用其改性醇酸脂和制造气干型不饱和聚酯等情况。     

粘接低表面能材料的新型胶粘剂研究

详述了用于低表面能材料粘接的新型胶粘剂的制备过程,探讨了低表面能胶粘剂的粘接机理,并讨论了弹性体、三乙基硼烷胺络合物、丙烯酸单体等对低表面能材料胶粘强度的影响.     

有机硅对无机层状材料的插层处理

主要介绍了无机层状材料的结构、插层的方法、插层产物的表征等。     

TPR处理剂的研究

利用活性单体苯乙烯与氯丁橡胶、高苯乙烯热塑弹性体接枝聚合，所得产物稀释后用于ＴＰＲ（ＴｈｅｒｍａｌＰｌａｓｔｉｃＲｕｂｂｅｒ）粘接前的预处理，可明显提高剥离强度。     

聚酯酰胺热熔胶的合成及其性能研究

研究了以聚酯胶和聚酰胺胶为原料在催化剂作用下加热共熔,通过大分子链交换反应制备织物用聚酯酰胺热熔胶的方法。用聚酯胶的溶剂对所得产品进行溶取试验并且通过红外光谱分析都证明了链交换反应的存在。用该法所得产品粘接强度大,既耐水洗又耐干洗,适用于粘合衬生产。     

A Solder Alloy Filled Z-Axis Conductive Epoxy Adhesive

Epoxy adhesives filled with four different volume fractions of eutectic tin-bismuth solder alloy were prepared and the effect of filler content on the electrical and mechanical properties of these anisotropic electrically conductive adhesives was investigated. The results show that the adhesive containing the lowest amount of the filler alloy had the best combination of conductivity, insulation resistance and shear strength. The DSC-measurements suggested that the filler melts before the cure of the resin begins which allows the filler to wet and bond well to the conductors. This was verified by SEM/EPMA examinations. A temperature cycling test and high humidity, high temperature treatment were conducted on the best composite adhesive. The temperature variation had no effect on conductivity of the joints while humid and hot environment decreased the conductivity.     

脱酮肟型有机硅建筑密封胶的研制

本文介绍了脱酮肟型有机硅建筑密封胶的配制原理、工艺、产品性能及其影响因素     

整形美容外科用新材料—─瘢痕软化用硅胶纱布膜

本文研究了硅胶纱布膜的制备方法和治疗效果。在增生性瘢痕的治疗中，硅凝胶能较快地软化和减轻瘢痕，其治疗时间要比加压疗法短。目前，对硅凝胶的作用机理尚未完全明了，但一般认为水化和封闭是治疗作用的主要基础     

Relationship between Viscoelastic and Peeling Properties of Model Adhesives. Part 1. Cohesive Fracture

The viscoelastic and peeling properties of polybutadiene/tackifying resin compatible blends have been studied in detail. Viscoelastic properties have been described through the variations of the complex shear modulus, G*(ω), as a function of frequency, ω and peeling properties through the variations of peeling force (F) as a function of peeling rate (V).

After showing the objective character of the peeling curves obtained, the variations of the peeling force and peeling geometry have been studied as a function of volume fraction of the tackifying resin.

In this first paper, the analysis is focused on the first domain of the peeling curves, i.e. the cohesive fracture region. In this region, the peeling properties have been related to the viscoelastic properties in the terminal region of relaxation. It is shown that the longest relaxation time, τ_o, is a reducing parameter of the peeling curves, so a peeling master curve-which is independent of temperature, resin volume fraction and polymer molecular weight-may be defined. Furthermore, the variations of the test geometry as a function of peeling rate have been investigated: the variations of the radius of curvature of the aluminium foil have been analyzed with respect to the viscoelastic behavior of the adhesive, which in fact governs the test geometry.

A detailed analysis of all these features leads to a model which allows one to calculate the peeling curves in the cohesive domain from the adhesive formulation.     

水性聚氨酯胶研究及应用

综述了国内外水性聚氨酯胶特点及应用,对水性聚氨酯乳液的制备及物理性质和聚氨酯胶层的性能进行分析和阐述。