机械合金化Fe50Ti50非晶的形成及球磨强度对它的影响

本文通过电子扫描和Ｘ衍射对机械合金人Ｆｅ５０Ｔｉ５０非晶粉末形成做了研究。研究发现：机械合金非晶形成可以大致地分为二个阶段－粉末的破碎阶段和非晶的形成阶段。另外，对球磨强度对非晶形成的影响进行了研究。结果表明：强度低时粉末需要较长的时间才能形成非晶，强度高时粉末形成非晶的时间大大缩短，但在随后的球磨中，粉末会重新晶化形成新相。     

Transient analysis of an advanced static var compensator using quad-series voltage-source PAM inverters

This paper deals with an advanced static Var compensator (ASVC) using quad-series voltage-source PAM inverters. The ASVC consists of four three-phase voltage-source inverters with a common dc capacitor and four three-phase transformers, each primary winding of which is connected in series with each other. Each inverter outputs a square-wave voltage, while the synthesized output voltage of the ASVC has a 24-step wave shape. This results not only in a great reduction of harmonic currents and dc voltage ripples but also in fewer switching and snubbing losses. In this paper, transient analysis is performed with the focus on the response of reactive power and the resonance between the dc capacitor and ac reactors. Experimental results obtained from a small-rated laboratory model of 10 kVA are also shown to verify analytical results based on the p-q transformation. The analytical results help in the design of system parameters such as the capacity of the dc capacitor and feedback gains.     

变速铣削的试验研究

通过试验考证了变速铣削的减振效果和机床电机电流的波动幅度，试验结果表明，变速铣削同样具有明显的减振效果。机床电机电流虽有波动，但波动幅度不大，不会影响电机的正常使用，变速铣削具有良好的应用前景。     

Evaluation of a two-temperature control structure for a two-reactant/two-product type of reactive distillation column

Several different control structures have been proposed for reactive distillation columns. The appropriate control structure depends on the flowsheet and on the type of reactions occurring in the column. If two reactants are involved and if it is desirable to operate the process without any excess of reactant, it is necessary to manage the fresh feed streams so that the stoichiometry is exactly balanced. A composition analyzer that measures an internal composition in the column is often required. However, if two products are produced, it is possible to avoid the use of an analyzer by using two temperatures in the column to adjust the two feed streams. This type of structure was proposed by Roat et al. [Roat, S., Downs. J., Vogel, E., Doss, J., 1986. Integration of rigorous dynamic modeling and control system synthesis for distillation columns. In: Chemical Process Control—CPC III. Elsevier, Amsterdam.] for the ideal reaction A+B↔C+D in one of the earliest papers dealing with reactive distillation control.The purpose of this paper is to explore the effectiveness of this two-temperature control structure for various column designs (number of reactive stages) to quantify the impact of design on controllability. We also discuss the issues of the selection of the trays whose temperatures are to be controlled and the tuning of the two interacting temperature controllers. Disturbances in production rate and fresh feed compositions are made to examine the rangeability of this control structure. Both an ideal reaction system and the methyl acetate system are studied. One of the main conclusions is that the locations of the temperature control trays should be made such that the two temperature controllers both have direct action (an increase in temperature increases feed), which requires negative openloop process gains for both loops.     

波形刃铣刀片铣削温度试验分析

进行了铣削温度试验 ,采用改进的人工热电偶法 ,利用动态数据采集系统 ,对波形刃铣刀片的铣削温度进行了采集。利用C语言和MATLAB软件对试验数据进行了分析 ,拟合出温度—时间 (T t)曲线 ,初步得到了受热密度函数 ,为温度场的可视化打下有力的基础     

Creation of Ultra-precision Microstructures with High Aspect Ratios

In recent years, ultra-precision micromachining technology has been used in a variety of fields such as optical instruments, electronic devices, medical equipments, etc. At present, it is essential to meet the requirement of producing various shapes, one of which is a structure with a high aspect ratio. Such structures are applied, for example, to a shaft of micro robot, a long part of microactuator and micromachine, a microneedle for syringe, etc. However, due to its fragile nature, it is extremely difficult to fabricate the structure with a high aspect ratio since it is easily damaged during cutting. It is intended to produce micro towers with high aspect ratios by applying the ultra-precision milling technology using a single crystal diamond cutting tool. The method enables accurate creation of a variety of microstructures with high aspect ratios. In addition, the study also proposes a new machining method to create microneedle arrays, avoiding the contact of cutting edge with already machined parts again. As a result, it is concluded that the proposed method has the potential of producing a variety of microstructures with high aspect ratios.     

Transformations in machining. Part 1. enhancement of wavelet transformation neural network (WT-NN) combination with a preprocessor

Properly selected transformation methods obtain the most significant characteristics of metal cutting data efficiently and simplify the classification. Wavelet Transformation (WT) and Neural Networks (NN) combination was used to classify the experimental cutting force data of milling operations previously. Preprocessing (PreP) of the approximation coefficients of the WT is proposed just before the classification by using the Adaptive Resonance Theory (ART2) type NNs. Genetic Algorithm (GA) was used to estimate the weights of each coefficient of the PreP. The WT-PreP-NN (ART2) combination worked at lower vigilances by creating only a few meaningful categories without any errors. The WT-NN (ART2) combination could obtain the same error rate only if very high vigilances are used and many categories are allowed.     

A polynomial dynamic system approach to software design for attractivity requirement

Because of the widespread increasing application of Web services and autonomic computing, self-adaptive software is an area gaining increasing importance. Control theory provides a theoretical foundation for self-adaptive software. In this paper, we propose the use of the supervisory control theory of discrete event dynamic systems (DEDS) to provide a rigorous foundation for designing software for reactive systems. This paper focuses in particular on design of software with an attractivity requirement. It studies this problem using the polynomial dynamic system (PDS) model of DEDS. A necessary and sufficient condition for software existence and two algorithms for such software design are presented.     

Diamino telechelic polybutadienes for solventless styrene-butadiene-styrene (SBS) triblock copolymer formation

High molecular weight, high functionality diamino telechelic polybutadienes (TPBs) were synthesized by ring-opening metathesis polymerization (ROMP) of 1,5-cyclooctadiene (COD) in the presence of a chain transfer agent, 1,8-dicyano-4-octene, followed by lithium aluminum hydride reduction. Melt coupling of diamino TPB with anhydride-terminated polystyrene (PS-anh) resulted in the formation of styrene-butadiene-styrene (SBS) triblock copolymers; ca. 80% maximum conversion of PS-anh was achieved within 30 s. The results from SAXS, TEM, and rheological measurements of the coupling products confirmed the formation of SBS triblock copolymers having lamellar morphology. A fluorescent-labeled PS-anh was used to study the coupling kinetics by diluting the reactants by the addition of non-functional PS.     

提高干压各向异性SrM磁体磁性能的方法

以Y30H-1的SrM预烧料为原料,通过对二次添加剂、二次球磨及烧结曲线的调整,做出了Br≥380mT,Hcb≥240kA穖-1,Hcj≥250kA穖-1,(BH)max≥27.0kJm-3的干压各向异性锶铁氧体产品。