On using peak amplitude and rise time for AE source characterization

Acoustic Emission (AE) signals, which are electrical version of acoustic emissions, are usually analysed using a set of signal parameters. The major objective of signal analysis is to study the characteristics of the sources of emissions. Peak amplitude(P _a ) and rise time(R _t ) are two such parameters used for source characterization. In this paper, we theoretically investigate the efficiency ofP _a andR _t to classify and characterize AE sources by modelling the input stress pulse and transducer. Analytical expressions obtained forP _a andR _t clearly indicate their use and efficiency for source characterization. It is believed that these results may be of use to investigators in areas like control systems and signal processing also     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

叶绿素衍生物─CPD_4在人血清中的激发和发射荧光谱

叶绿素衍生物４号（ＣＰＤ４）是一种新型中药光敏剂，本文研究了不同浓度的ＣＰＤ４分别在含１０％不同血型人血清的生理盐水中以及纯生理盐水中的激发和发射荧光光谱，并对结果进行了分析，结论对ＣＰＤ４在光动力诊断恶性肿瘤的临床应用具有一定的指导意义．     

Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

伴随内转换电子发射的俄歇电子能量及强度计算

简要介绍了伴随内转换电子发射产生的俄歇电子能量与强度的计算方法、计算程序及工作流程，并以^129Iβ^-衰变为例说明其具体应用。     

New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating

Complementary electroplating combined with electrophoresis enhanced the field emission characteristics of emitters by improving the adhesions between CNT emitters and substrate. The emitting current of the CNT emitters prepared by our combined method increased nine times higher than that of CNT emitters prepared by electrophoresis only, since electroplating improved the adhesion of CNT emitters. During the life-time measurement for 10 h, the emitting current of CNT emitters fabricated by electrophoresis only was drastically decreased to 13% of the initial current, while that prepared by the combination of electrophoresis and successive electroplating decreased to 64% of the initial current. We suggest that our method is a promising approach for the efficient fabrication of reliable CNT emitters.     

Red Wine Polyphenols for Cancer Prevention

Conventional cancer therapies, the second leading cause of death worldwide, result in serious side effects and, at best, merely extend the patient''s lifespan by a few years. Searching for effective prevention is of high priority in both basic and clinical sciences. In recent decades natural products have been considered to be an important source of cancer chemopreventive agents. Red wine polyphenols, which consisted of various powerful antioxidants such as flavonoids and stilbenes, have been implicated in cancer prevention and that promote human health without recognizable side effects. Since resveratrol, a major component of red wine polyphenols, has been studied and reviewed extensively for its chemopreventive activity to interfere with the multi-stage carcinogenesis, this review focuses on recent progress in studies on cancer chemopreventive activities of red wine polyphenol extracts and fractions as well as other red wine polyphenols, like procyanidin B5 analogues and myricetin.     

Plasma properties of laser-ablated St target in air

Ｐｌａｓｍａｐｒｏｐｅｒｔｉｅｓｏｆｌａｓｅｒ－ａｂｌａｔｅｄＳｔｔａｒｇｅｔｉｎａｉｒＷａｎｇＸｉａｎｇ－Ｔａｉ（王象泰）；ＭａｎＢａｏ－Ｙｕａｎ（满宝元）；ＷａｎｇＧｏｎｇ－Ｔａｎｇ（王公堂）；ＦａｎＸｉ－Ｊｕｎ（樊锡君）；ＷａｎｇＪｕｎ（王军）...     

MIM隧道结的电子输运特性和发光研究

论述作为一种新型发光器件的ＭＩＭ隧道结的发光机理，报告了该器件的发光现象和Ｉ－Ｖ特性曲线中负阻现象的实验观察。数据显示，结中表面等离极化激元（ＳＰＰ）与粗糙度的耦合是引起光发射的主要方面，ＳＰＰ对隧穿电子的阻塞作用导致了电子输运中的负阻现象。此外，还观察到了直接辐射的紫外峰。     

Method of increasing the output signal-to-noise ratio in passive multi-element antenna arrays

A method of processing complex signals in passive multi-element antenna arrays based on an analysis of the natural values of the correlation matrix of the signal is considered. By means of the method it is possible to substantially increase the output signal-to-noise ratio. An iterational process by means of which optimal estimators of both the signal and the amplitude-phase distribution may be obtained, is proposed. Theoretical estimators of the efficiency of the method are given. It is proved that, in terms of the efficiency, the approach considered in the article comes close to the technique of matched filtration. Results of statistical modeling that confirm the statistical results are presented.