Surface Chemical Modification of Poly(Methylphenylphosphazene)

Summary The surface reactivity of poly(methylphenylphosphazene), PMPP, and its derivatives containing silane, PMPP-SiH, and alcohol, PMPP-OH, substituents was investigated. These polymers were fabricated into films by casting from THF solutions and reactions were carried out at the interface between solid film samples and solutions. The surface of PMPP was successfully modified by deprotonation under dilute conditions followed by reactions with RMe₂SiCl [where R = CH=CH₂, and H]. While surfaces of PMPP-OH were not readily modified, those containing Si-H groups reacted with oxygen when heated and with carbon tetrachloride. The polymer surfaces were examined by contact angle measurements, attenuated total reflectance infrared spectroscopy (ATR-IR), and scanning electron microscopy (SEM). We dedicate the paper to Christopher W. Allen in recognition of his outstanding contributions to inorganic ring and polymer chemistry.     

吡啶衍生物及其催化闭环法合成

介绍吡啶衍生物的分类,并详细总结了烷基吡啶和卤代吡啶的应用及其合成路线。简要分析全球吡啶及其衍生物的生产及市场现状,概述了烷基吡啶和卤代吡啶的合成技术进展及其合成方法,并对吡啶衍生物的催化闭环法合成进行了介绍。最后指出我国的科研工作者应重视开发具有自主知识产权的吡啶新化合物。     

Synthesis and characterization of maltose fatty acid monoesters as biosurfactants

Maltose long-chain fatty acid esters (MFAE), esterified at the 6 and 6′ position, were synthesized with stearic, palmitic, myristic, and oleic groups. Synthesis yields were 15–20% based on initial maltose present, and structural confirmation was obtained using plasma desorption mass spectrometry and nuclear magnetic resonance spectroscopy. These surfactants have surface tensions in the range of 34–36 dyn/cm at their critical micelle concentrations (CMC) of approximately 10⁻⁵–10⁻⁶ mol/L. The increased chain lengths have a marked effect, reducing CMC values for MFAE by approximately three orders of magnitude over similar carbohydrate-based dodecyl chain sources. Within chain lengths between 14 and 18 carbons, the rate of change in CMC is significant and decreases with increasing chain length for MFAE. The melting points of MFAE are approximately 40°C, and the heat capacities range from 1.6 to 1.9 J/g·K. These numbers are comparable to those of sucrose esters, indicating their applicability in similar uses. However, because MFAE, unlike sucrose, possess an anomeric carbohydrate carbon position, these surfactants maintain their reducing nature and are susceptible to further derivatization. They are also synthesized from renewable, economical carbohydrates and lipids and may provide an excellent alternative to pertrochemical-derived products.     

Isolation,identification, and function of the Dufour gland secretion ofXylocopa virginica texana (Hymenoptera: Anthophoridae)

The Dufour's gland secretion ofXylocopa virginica texana possesses short-term repellency for conspecifics when applied to passion flowers. This secretion contains a number of straight-chain hydrocarbons. The two major components are the methyl esters of palmitic and myristic acid. A mixture of the two esters and two of the available hydrocarbons were as effective as the Dufour's gland extract in eliciting a response in females to the passion flower,Passiflora incarnata, to which the extract was applied.Approved as TA13387 by the Director, Texas Agricultural Experiment Station and conducted in cooperation with the USDA. Supported in part by NSF-DEB-76-03963.     

直链烷基苯生产工艺及市场分析

通过对大量资料的收集与整理，简述了全球直链烷基苯的生产工艺及应用情况，重点介绍了目前全球最新的直链烷基苯生产工艺——固体酸烷基化生产工艺(DETAL工艺)。同时对全球范围内直链烷基苯的供应与需求情况进行了介绍，并对直链烷基苯的未来市场进行了分析与预测。     

一种合成二烃基硒醚的新方法

在固体氢氧化钠存在下，卤代烃及硼氢化钠与硒粉作用，在乙醇溶液中制得二烃基硒醚。     

Preparation of glycol derivatives of partially hydrogenated soybean oil fatty acids and their potential as lubricants

Glycol diesters and mixtures of mono- and diesters have been prepared from methyl esters of partially hydrogenated soybean oil fatty acids and diethylene, dipropylene, neopentyl and triethylene glycols. The catalyst used in these reactions was a mixture of calcium acetate/barium acetate (3∶1, w/w). The reactions were carried out under nitrogen with 0.5% catalyst at temperatures in the range of 190–275°C. Borated esters of mixed mono- and diesters were prepared with 0.33 equivalent of boric acid per 1.0 equivalent hydroxyl group on the ester. Refractive indices, viscosities, and flash and fire points were determined for diesters, mixed mono- and diesters, and mixed diesters and borated esters. The viscosities, flash points and fire points indicate that these esters can be used as a component of lubricating oils. Wear-prevention characteristics of mixed diesters and borated esters indicated that they can be used as antifriction additives in lubricating oils. Lecture presented at the joint meeting of the International Society for Fat Research and the American Oil Chemists' Society in Toronto, May 10, 1992.     

对羟基苯甲酸酯的催化剂研究

综述了固体超强酸TiO2/SO42-,磷钨、硅钨杂多酸及固载杂多酸盐TiSiW12O40/TiO2,浓硫酸(微波常压法),Lewis酸(FeCl3·6H2O,Fe2(SO4)3·xH2O)等几种不同催化剂催化合成对羟基苯甲酸酯的实验结果.分析各种固体催化剂对该酯化反应的催化活性、选择性、重复使用性能及使用范围.     

Phase diagrams for oil/methanol/ether mixtures

One-phase transmethylations of vegetable oils with methanol to form methyl esters occur considerably faster than conventional two-phase reactions. Addition of simple ethers is an efficient method for producing a single phase. Ternary phase diagrams have been determined at 23°C for oil/methanol/ether mixtures; these are useful when applying the one-phase method across a wide range of conditions. Soybean, canola, palm, and coconut oils were used in combination with five ethers, namely, tetrahydrofuran (THF), 1,4-dioxane (DO), diethyl ether (DE), diisopropyl ether (DI), andtert-butyl methyl ether (TBM). All five ethers can produce miscibility for all methanol/oil compositions. The ether/methanol volumetric ratios required for miscibility at a methanol/soybean or canola oil volumetric ratio of 0.20 (5.4 molar ratio) at 23°C are: THF, 1.15; DO, 1.60; DE, 1.38 DI, 1.57; and TBM, 1.57. For THF, this results in one-phase mixtures that contain 65 vol% oil. Soybean and canola oil form identical diagrams. Palm oil requires slightly less ether at the lower methanol concentrations, but coconut oil requires considerably less across the whole concentration range. Acid-catalyzed reactions, when performed at the boiling point of the most volatile component, require less ether than predicted from the diagrams.     

Low-temperature properties of triglyceride-based diesel fuels: Transesterified methyl esters and petroleum middle distillate/ester blends

This work examines low-temperature properties of triglyceride-based alternate fuels for direct-injection compression-ignition engines. Methyl esters from transesterified soybean oil were studied as neat fuels and in blends with petroleum middle distillates (No. 1 or No. 2 diesel fuel). Admixed methyl esters composed of 5–30 vol% tallowate methyl esters in soyate methyl esters were also examined. Pour points, cloud points, and kinematic viscosities were measured; viscosities at cooler temperatures were studied to evaluate effects of sustained exposure. Low-temperature filterability studies were conducted in accordance with two standard methodologies. The North American standard was the low-temperature flow test (LTFT), and its European equivalent was the cold-filter plugging point (CFPP). With respect to cold-flow properties, blending methyl esters with middle distillates is limited to relatively low ester contents before the properties become preclusive. Under most conditions, cold-flow properties were not greatly affected by admixing the methyl esters with up to 30 vol% tallowate (before blending). Least squares analysis showed that both LTFT and CFPP of formulations containing at least 10 vol% methyl esters are linear functions of cloud point. In addition, statistical analysis of the LTFT data showed a strong 1:1 correlation between LTFT and CP. This result may prove crucial in efforts to improve low-temperature flow properties of alternate diesel fuels that contain methyl esters derived from triglycerides.