甲醇气相氧化羰化合成碳酸二甲酯 Ⅲ.复合载体铜基催化剂的表征

采用X射线衍射、表面物理吸附、CO原位吸附红外光谱、X射线光电子能谱以及热重分析方法对甲醇直接气相氧化羰化合成碳酸二甲酯的复合载体铜基催化剂(Cu(Ⅱ)/Naβ-AC)的物化性能进行了表征。实验结果表明,微波辐射条件下制备的Cu(Ⅱ)/Naβ-AC催化剂中,活性组分CuC l2一方面与分子筛载体间发生了固相离子交换反应,并形成了铜分子筛物种,另一方面,可直接高度分散在复合载体表面。反应后Cu(Ⅱ)/Naβ-AC催化剂中部分Cu2+被还原为Cu+或Cu0,Cu2+的结合能峰向低结合能方向迁移,但微波辐射处理并未破坏分子筛载体的骨架结构。采用复合载体增加了催化剂的比表面积,并产生一定量的微孔,从而提高了催化剂的氧化羰化反应活性。热重分析表明,当温度低于350℃时,Cu(Ⅱ)/Naβ-AC催化剂稳定性较好。     

C pm MPPAC for manufacturing quality control applied to the precision voltage reference process

The multiprocess performance analysis chart (MPPAC) based on the process capability index C_pm, called C_pm MPPAC, is developed for analysing the manufacturing quality of a group of processes in a multiple process environment. The C_pm MPPAC conveys critical information of multiple processes regarding the departure of the process and process variability from one single chart. Existing research works on MPPAC are restricted to obtaining quality information from one single sample of each process ignoring sampling errors. The information provided from existing MPPAC charts, therefore, is unreliable and misleading and results in incorrect decisions. In this paper, we consider the natural estimator of C_pm based on multiple samples. Based on the natural estimator of C_pm, we consider the sampling errors by providing an explicit formula with the Matlab program to obtain the estimation accuracy of the C_pm. We tabulate the sampling accuracy of C_pm for sample size determination so that the engineers/practitioners can use it for their in-plant applications. An example of multiple precision voltage reference (PVR) processes is presented to illustrate the applicability of C_pm MPPAC for manufacturing quality control.     

Bioactive Ca-P scaffolds used for bone reconstruction

1　INTRODUCTIONSkeletalreconstructionorregenerationisre quiredincasesinvolvinglargedefectscreatedbytu morresection ,trauma ,andskeletalabnormalities .Graftsandflapsofautogenoustissuearetwoofthemostsuccessfulmeansofreconstructionbecausetheyallowthetransplantationofbonecontainingbioactivemolecules,livecells ,andfrequently ,avascularsup plythatallowthetransplanttosurviveandremodeleveninhostileradiatedenvironments .However ,onlyaminimalamountoftissuecanbeharvestedforauto grafts,anditisverydiff…     

Increasing testing productivity and software quality: A comparison of software testing methodologies within NASA

Pressure to compress the development life cycle and reduce the duration and resources committed to testing lead to experimentation in testing at the NASA Goddard Space Flight Centerís Software Engineering Laboratory. This study investigates the trend to reduce developer testing and increasingly rely upon inspection techniques and independent functional testing to shorten the development life cycle, improve testing productivity, and improve software quality.An approach is developed to conduct this comparison. In particular, the problem faced by software researchers, having a comprehensive characterization of software projects so similar types may be identified for comparative studies, is addressed using expert opinion.     

第四十届国际尖端材料学会年会与展览简介

介绍国外先进材料技术现状与发展趋势，即强调发展新材料技术，低成本生产技术，质量控制技术，重视先进材料应用，两用技术和军转民。     

Accelerated sintering of PtRh/Al2O3 catalysts in an oxygen periodic pulse flow

PtRh catalysts were prepared by coimpregnation, with chlorine-free precursors of a -alumina. They were sintered at 973 K under a continuous flow of O₂ (1% in Ar or air) or of a flow of Ar into which pulses of O₂ were injected periodically. Under the latter conditions the sintering was significantly accelerated, particularly for a certain value of the period of O₂ pulses.     

饮用水中天然有机物的分析与表征方法

天然有机物(NOM)是一类分布广泛、成分复杂的有机混合物,可严重影响饮用水的处理效率,并可能对出水水质产生严重的不利影响。因此,为了改进和优化饮用水的处理过程,在研究和实际应用阶段对NOM进行表征和定量以了解其结构特性和反应性具有重要意义。文中先对NOM的富集方法进行了介绍,接着梳理了不同分离方法的依据及作用,最后总结了各类表征方法的原理及应用,以期有助于对NOM和饮用水处理的深入研究。     

混炼胶表征和橡胶产品计算机建模以优化汽车工业用橡胶产品

本文介绍了建立准静态橡胶制品模型所必需的一些与橡胶有关的试验。也介绍了后定位器制造、复合软管扣压和电气连接器组装等生产过程,计算机预测数据均在物理样机测试结果的5%以内。     

Analysis of the Structure and Biosynthesis of the Lipopolysaccharide Core Oligosaccharide of Pseudomonas syringae pv. tomato DC3000

Lipopolysaccharide (LPS), the major component of the outer membrane of Gram-negative bacteria, is important for bacterial viability in general and host–pathogen interactions in particular. Negative charges at its core oligosaccharide (core-OS) contribute to membrane integrity through bridging interactions with divalent cations. The molecular structure and synthesis of the core-OS have been resolved in various bacteria including the mammalian pathogen Pseudomonas aeruginosa. A few core-OS structures of plant-associated Pseudomonas strains have been solved to date, but the genetic components of the underlying biosynthesis remained unclear. We conducted a comparative genome analysis of the core-OS gene cluster in Pseudomonas syringae pv. tomato (Pst) DC3000, a widely used model pathogen in plant–microbe interactions, within the P. syringae species complex and to other plant-associated Pseudomonas strains. Our results suggest a genetic and structural conservation of the inner core-OS but variation in outer core-OS composition within the P. syringae species complex. Structural analysis of the core-OS of Pst DC3000 shows an uncommonly high phosphorylation and presence of an O-acetylated sugar. Finally, we combined the results of our genomic survey with available structure information to estimate the core-OS composition of other Pseudomonas species.     

硫化物改质对20MnCr5齿轮钢夹杂物和切削性能的影响

 齿轮钢广泛应用于汽车、机械等传动系统,易切削化是提高齿轮加工效率、降低制造成本的主要途径之一。提高钢中硫元素含量是改善齿轮钢切削性能的有效方式,然而过多的硫元素在轧制时会形成条带状MnS,增大钢的各向异性,因此需要对硫化物进行改制处理。分别采用Ca处理和Mg处理两种方式对20MnCr5齿轮钢进行硫化物改质,通过对力学性能、组织形态、夹杂物分布以及切削性能等表征,对比分析不同改制方式对材料的影响。结果表明,Ca处理和Mg处理后试验钢的强度和塑性保持一致,而Mg处理试样的晶粒尺寸较小,因而韧性较高。Ca处理试验钢中MnS夹杂物数量较多,长条状夹杂物比例相对较高;而采用Mg处理可以有效降低钢中夹杂物的数量,夹杂物平均尺寸有所增大,同时小长径比夹杂物数量增多,但是复合氧化物型夹杂物的数量也有所增加。在240~280 m/min条件下进行了干切削试验,结果表明两种试验钢均出现前刀面磨损、后刀面磨损和边界磨损,其中Ca处理试样的刀具磨损较为严重,同时在较高切削速度下出现了积屑瘤和崩角现象,而Mg处理试样则具有更长的刀具使用寿命,对切削速度的敏感性也较低。分析可知,Mg处理后钢中存在较多的大尺寸球状硫化物夹杂物,提高了应力集中效应,更有利于改善切削性能,因而改制效果更好。