金堆地区浅基础设计的实践

通过对金堆地区建筑物稳定性变化的分析，提出了金堆地区浅基础设计的见解，阐明了在进行浅基础设计时，应在综合分析地质、地形、地貌、建筑物特性等因素的基础上，进行择优选择，对该地区的浅基础设计有一定的指导意义。     

润滑油基础油的现状及发展趋势

叙述了内燃机油的发展对基础油的要求，并对传统工艺和加氢工艺生产的基础油质量状况进行了分析，指出润滑油加氢工艺是提高基础油质量的有效途径。加氢工艺生产基础油是润滑油的发展趋势。     

未来航空润滑油基础油

介绍了未来航空涡轮发动机对润滑油性能的要求:在260,-54℃时,试样运动黏度分别大于1.0 mm2/s和小于15 000 mm2/s,热氧化安定性温度为260~427℃。该要求已超出了目前使用的酯类润滑油所能承受的最大极限。为了满足要求,需开发全氟聚醚、改性硅油、聚苯醚、C-型醚、氟醚三嗪及环三磷偶氮润滑油基础油,它们的使用温度依次为:-34~316,-60~260,5~288,-29~260,-30~343,-15~343℃。     

环氧基的PCB对无铅组装的兼容性

综述了环氧树脂基的PCB与无铅化组装的兼容性问题。经过大量试验表明,常规的FR-4基材和双氰胺固化的高Tg基材是不能满足无铅化组装要求的,而采用酚醛固化的中等-Tg的环氧树脂基材是可能成为无铅化组装用基材的。同时,PCB制造过程也起着重要的作用。PCB设计和再(回)流焊的加热梯度也影响着无铅化的性能。     

几何造型的自由畸变方法

几何造型是计算机图形学的重要研究内容，ＣＡＤ／ＣＡＭ的核心技术，现行的许多造型系统仅限于造型二次曲面及旋转曲面，没有自由曲面造型能力，本文研究的自由畸变为法，很容易扩展这些系统的自由曲面造型功能，该方法已成功地用于扩展ＭＯＶＩＥ．ＢＹＵ系统的自由曲面造型功能。     

Gas-phase selective oxidation of toluene on TiO2–sepiolite supported vanadium oxides: Influence of vanadium loading on conversion and product selectivities

Gas-phase selective oxidation of toluene has been carried out on vanadium oxide systems (5–20 wt.% of V₂O₅, equivalent to 0.4–1.7 theoretical monolayers) supported on TiO₂–sepiolite (with titania loading around the theoretical monolayer, 12 wt.%) and on sepiolite. A study has been made on both the influence of vanadia loading and of the support on the catalytic behaviour of the supported vanadium systems. The reducibility by H₂ TPR was also studied as well as the acid and basic/redox sites from the results of conversion of the 2-propanol test reaction of the solids. Benzaldehyde, benzoic acid and several coupling products were the main ones detected, attaining over 50% selectivity towards the benzaldehyde and benzoic acid products at a total conversion around 10%. The activity and selectivity to the selective products exhibited by vanadium systems supported on mixed support were superior to those exhibited by the systems supported on sepiolite and increased notably in both series with the increase in vanadium loading. The best catalytic behaviour exhibited by the vanadium systems supported on mixed support, which also exhibited the highest density of sites capable of being reduced (as well as their reducibility) and of those responsible for propanone formation, could be attributed not only to the different balance of the vanadia species existing in the two supports (monomeric + oligomeric/polymeric), but also to such other factors as the nature of the support and, concretely, its chemical composition.     

加氢润滑油基础油光安定性研究进展

加氢处理基础油与溶剂精制基础油相比具有硫、氮含量低，颜色浅，粘度指数高，挥发性低，饱和烃含量高，对添加剂的感受性好等优点。但是，加氢处理润滑油基础油的一个明显缺点就是其光安定性差，即在有氧条件下通过光照（有时也需加热），油品颜色加深、透明度变差，继而有絮凝物或沉淀生成。文章综述了国内外有关加氢润滑油基础油光安定性的原因和解决办法的研究进展情况。     

二硅化钼用于钼基的耐热涂层

介绍ＭｏＳｉＯ２用于钼基的耐热涂层，进行涂层的动力、金相学和添加剂的分析。     

测井资料高分辨率层序地层分析

高分辨率层序地层学克服了岩性地层对比穿时的缺点.高分辨率层序地层对比是等时的高精度的地层对比,它满足了勘探开发中地层对比等时性和高分辨率的要求.测井资料的纵向分辨率较高,是高分辨率层序地层研究的重要资料.提出了利用测井相分析技术,从测井资料上识别出单井岩性和沉积微相剖面,结合测井曲线特征,划分单井基准面旋回,并进行连井地层等时对比,这为定量地进行高分辨率层序地层分析提供了一种方法.通过研究区实际资料的处理,验证了该方法的有效性.