A new model of job design: Initial evidence and implications for future research

Clegg and Spencer's (2007) model of job design synthesizes and extends recent conceptions of the job design process by incorporating variables such as knowledge, motivation, and trust into a cyclical and dynamic system. The objective of this study was to examine the sequential organization of variables that comprise the model, as a basis from which to justify further investigations of the model's dynamic properties. Data were collected via questionnaires from 432 participants in two work organizations. Results obtained from structural equation modeling are broadly supportive of the proposed relationships between the variables. Implications of this initial study for future research and practice are discussed. © 2011 Wiley Periodicals, Inc.     

基于标准件库的螺钉联接自适应设计

提出一种AutoCAD环境中基于标淮件库的螺钉联接自适应设计算法。利用螺钉和垫片以及被联接件之间设计信息的相关性自动确定装配方位及联接件的几何参数，自动检测和复原被联接件的剖面线，简化了设计过程。     

神经网络在电液位置伺服系统中的应用

设计了基于BP神经网络的自适应PID控制器，该控制器充分利用了经典PID控制算法简单的特点，又利用了神经网络良好的自适应和抗干扰能力，通过神经网络的学习和对系统的在线辨识，自适应调整PID参数，使控制系统对参数变化表现出良好的鲁棒性和控制性能，并通过仿真证明了所设计系统的合理性。     

自粘聚合物改性沥青防水卷材胶粘剂

在SBS改性沥青防水卷材表面涂敷一层自粘性胶粘剂并以隔离纸覆盖，使用时撕掉隔离纸直接粘贴于屋面即可粘接密封牢，不但施工方便而且消除了熔融法施工造成的污染。该胶粘剂由沥青40％～65％，SBS 5％～30％，增粘剂2％～25％和助剂5％～25％构成。胶层具有可塑性、延展性，可自行填补屋面出现的裂缝，保证防水卷材的防水密封效果。     

Numerical Analysis of the Constrained Blister Test

The constrained blister test is investigated through finite element analysis to determine the applicabilities and the limitations of the new technique. Numerical results confirm that the strain energy release rate asymptotically approaches a constant value. These results also show that the test technique and the approximate solution for strain energy release rate are applicable for some practical cases.     

氯丁橡胶胶粘剂

1低温聚合、快速结晶型氯了用胶氯丁橡胶的结晶度与反式1，4含量有关，而反式1，4含量又是由乳液聚合温度决定的，聚合温度越低，反式1，4含量越高。为了得到快速结晶型氯丁橡胶，聚合必须在较低温度下进行，一般不高于15℃。快速结晶型氯丁橡胶广泛用于鞋底的粘接、层压板的粘合、汽车装饰，以及其它多种用途。主要从引发剂、调节剂等几个方面改进氯丁橡胶的性能：2＠基氯T橡胶。驻基氯丁胶是氯丁二烯和甲基丙烯酸的共聚物，是非结晶性，适用于室温硫化和耐热性用途。与快结晶型氯丁橡胶相比，由其配制的胶粘剂粘结强度形成更快，耐热性增…     

Measurement of Adhesive Bond Properties Including Damage by Dynamic Mechanical Thermal Analysis of a Beam Specimen

A method to obtain mechanical properties using a bonded (double) cantilever beam (or three point bend) specimen loaded in a manner to produce pure shear in the adhesive layer is reviewed. A revised mathematical solution which allows for easier interpretation of optimum beam dimensions to the one originally developed by Moussiaux, Cardon and Brinson for the static case is presented. An extension of this solution for a fixed/fixed viscoelastic beam under steady state oscillations developed by Li, Dickie and Morman is also discussed. Previous results using a vibrating beam to determine the complex viscoelastic properties of a bonded beam are reviewed. These results demonstrate conclusively that dynamic mechanical thermal analysis (DMTA) measurements discriminate differences in surface treatments and various environmental conditions. New measurements are presented that indicate the DMTA procedure can be used to quantify damage simulated by imbedded flaws in beams. The procedure is also shown to assess the effects of both humidity and corrosive environments on lap specimens. It is suggested that this technique may ultimately provide a method to quantify the amount of hidden damage in an adhesive joint subjected to fatigue, moisture or corrosive environments.     

XK908耐高温蒸煮胶粘剂的研制与应用

叙述了ＸＫ９０８耐高温蒸煮胶粘剂的制备方法，主要反应条件对缩聚反应和扩链反应的影响，并对产品的应用效果与国外同类产品进行了比较     

Adaptive receding horizon control for constrained MIMO systems

An adaptive control algorithm for open-loop stable, constrained, linear, multiple input multiple output systems is presented. The proposed approach can deal with both input and output constraints, as well as measurement noise and output disturbances. The adaptive controller consists of an iterative set membership identification algorithm, that provides a set of candidate plant models at each time step, and a model predictive controller, that enforces input and output constraints for all the plants inside the model set. The algorithm relies only on the solution of standard convex optimization problems that are guaranteed to be recursively feasible. The experimental results obtained by applying the proposed controller to a quad-tank testbed are presented.