Model of the influence of time and mild temperature on Listeria monocytogenes nonlinear survival curves

Heat treatment has long been regarded as one of the most widely used and most effective means of destroying pathogens in food. Up to now the linear relationship between the death rate and the temperature has been used when choosing the best heat treatment to apply. However, the information given by this linear relationship is no longer sufficient when nonlinear survival curves are observed. Consequently, the agri-food industry needs a tool to choose the best mild heat treatment to apply in the case of nonlinear survival curves. This study deals with the temperature-induced death of Listeria monocytogenes CIP 7831 in the stationary phase of growth. Eleven temperatures were tested. With the proposed primary and secondary models good fits of our data were obtained. A model describing both the effect of the duration of treatment and the temperature on the logarithm of the number of survivors was then built. A clear increase in the precision of the estimation of the parameters was obtained with this model. Moreover, with this model a new graphical strategy to choose a mild heat increase regarding a maximal survivor number has been proposed.     

应用浅层测温法寻找油气藏

地温法是非地震物化探手段中的一种常用方法，在油气普查和勘探方面已得到广泛应用，并取得了显著效果。简要介绍了地温法寻找油气藏的仪器设备、基本原理、适用范围及特点，并举例说明了其应用效果。应用高精度测温仪，通过开展浅层地温测量和研究，可以达到寻找油气的目的。     

计算机在热处理工艺编制中的应用

利用计算机强大的数据处理功能 ,对热处理工艺中的各种数据进行记录和处理 ,并制成各种图表 ,掌握其中的各种规律。使热处理工艺的编制不再是一种经验积累式的工作 ,而是依照其规律制定一次合格的规范的热处理工艺卡片 ,并为将来计算机工艺自动生成的工作打下基础     

Influence of thermal boundary conditions on natural convection in a square enclosure partially heated from below

Natural convection in air-filled 2D square enclosure heated with a constant source from below and cooled from above is studied numerically for a variety of thermal boundary conditions at the top and sidewalls. Simulations are performed for two kinds of lengths of the heated source, i.e., a small and a large source corresponding to 20% and 80% of the total length of the bottom wall, respectively. The Rayleigh number varied from 10³ to 10⁷. Results are presented in the form of streamline and isotherm plots as well as the variation of the Nusselt number and maximum temperature at the heat source surface. Comparisons among the different thermal configurations considered are reported.     

Heat loss and thermoelectric generator design

With the object of evaluating its importance to thermoelectric generator design, heat loss is introduced into the standard thermoelectric generator design theory. The theory for both the constant hot and cold junction temperatures model and the constant heat input model are so modified. The modification is first order and, therefore, is limited to small leg heat-transfer coefficients. Numerical results using representative properties show that significant differences can exist between the optimum geometry and performance of a generator idealized as lossless and those of a generator designed by the modified theory. The largest differences occur with the constant heat input model.     

Effect of RE on Granulation of Eutectic Carbide in Ledeburite Steel

ＲｅｃｅｎｔｌｙｔｈｅｂｅｎｅｆｉｃｉａｌａｃｔｉｏｎｓｏｆＲＥｏｎｉｒｏｎａｎｄｓｔｅｅｌｓｈａｖｅｂｅｅｎｒｅｐｏｒｔｅｄａｒｏｕｎｄｔｈｅｗｏｒｌｄ．ＲＥｃａｎｎｏｔｏｎｌｙｄｅｏｘｉｄｉｚｅａｎｄｄｅｓｕｌｐｈｕｒｉｚｅｔｈｅｍｅｌｔａｎｄｆ...     

高效辐射换热器的研制

本文所介绍的高效辐射换热器是指在其环缝通道中安装有网状二次传热面的辐射换热器，用对比实验方法研究了它们在空气预热温度、给热系数和阻力系数上的差别．实验表明：高效辐射换热器可强化空气侧的传热，其综合传热系数达５９Ｗ／（ｍ２·℃），而阻力系数可控制在３０００Ｐａ以内．     

Third-generation CALPHAD description of pure GeO2 at 1 atm

The thermodynamic properties of crystalline and liquid/amorphous phases of germanium dioxide have been evaluated using DFT calculations and third-generation CALPHAD models. The values for the standard entropies of crystalline and amorphous phases were reassessed through use of the Planck-Einstein approach. This allowed a more physically-based representation of the set of thermodynamic properties of germanium dioxide to be obtained.     

基于机器视觉的隔热条尺寸测量系统

针对当前隔热条的尺寸测量仍停留在产品离线后,工作人员用卡尺测量,劳动强度大,工作效率低、测量精度易受人为因素影响的现状,本文提出将机器视觉技术引入到隔热条自动化生产线的在线尺寸检测系统中,这种非接触式测量既可以避免在测量过程中对隔热条的损坏,又可以提高测量精度和测量速度,从而达到提高测量效能的目的。     

Radiation-absorption,chemical reaction,Hall and ion slip impacts on magnetohydrodynamic free convective flow over semi-infinite moving absorbent surface

The investigation of radiation-absorption,chemical reaction,Hall and ion-slip impacts on unsteady MHD free convective laminar flow of an incompressible viscous,electrically conducting and heat generation/absorbing fluid enclosed with a semi-infinite porous plate within a rotating frame has been premeditated.The plate is assumed to be moving with a constant velocity in the direction of fluid movement.A uniform transverse magnetic field is applied at right angles to the porous surface,which is absorbing the fluid with a suction velocity changing with time.The non-dimensional governing equations for present inves-tigation are solved analytically making use of two term harmonic and non-harmonic functions.The graphical results of velocity,temperature and concentration distributions on the analytical solutions are displayed and discussed with reference to pertinent parameters.It is found that the velocity profiles decreased with an increasing in Hartmann number,rotation parameter,the Schmidt number,heat source parameter,while it increased due to an increase in permeability parameter,radiation-absorption param-eter,Hall and ion slip parameters.However,the temperature profile is an increasing function of radiation-absorption parameter,whereas an increase in chemical reaction parameter,the Schmidt num-ber Sc or frequency of oscillations decrease the temperature profile on cooling.Also,it is found that the concentration profile is decreased with an escalating in the Schmidt number or the chemical reaction parameter.