PSO-IIIA(3)亚砜萃取Pt(IV)的机理

研究表明,在酸性介质中,亚砜萃取Pt(Ⅳ)的主要机理为酸性缔合,其萃合物组成为H_2PtCl_6·6H_2O·2PSO。并计算了亚砜萃取Pt(Ⅳ)的萃取平衡常数。     

高水头泄水建筑物侧墙掺气减蚀特性研究

工程中通常采用强迫掺气减蚀措施,防止泄水建筑物在高速水流作用下发生空蚀破坏,但在保护过流面底板的同时,忽视了对其侧墙的保护。为了减免位于高流速区域和低压区域侧墙发生空化空蚀,消除侧墙清水区,采用理论分析和物理模型试验研究方法,对龙抬头明流泄洪洞下游边墙掺气减蚀进行了研究,提出了在反弧末端加折流器（突扩）和突跌掺气方式。结果表明,采用突扩和突跌的掺气方式后,侧墙水流的出射角增大,侧空腔畅通,并直接和底空腔相连,有助于掺气坎后水舌的全断面的掺气,对侧墙和底板皆起到了很好的保护作用。     

Preparation of Iron Filler-Based Photocomposites and Application in 3D Printing

The introduction of metallic fillers to polymers via the photopolymerization approach can endow the composite materials with some unique properties, but the relevant research is still scarce due to the issue of light penetration and inner filter effect. Herein, for the first time the fabrication of photocomposites based on fine iron powder (i.e., a typical kind of metallic filler) is reported in this work. The free radical polymerization of two different acrylate monomers, poly(ethylene glycol) diacrylate and trimethylolpropane triacrylate, is performed in the presence of iron filler under mild conditions (i.e., light emitting diode (LED)@405 nm irradiation at room temperature under air). And the real-time Fourier transform infrared spectroscopy reveals remarkable photopolymerization kinetics of acrylates with high final conversions and fast polymerization rates despite the increasing contents of iron filler in the composites. Interestingly, the 3D printing technique is applied to the iron filler-based composites to produce tridimensional patterns with excellent spatial resolution. This work not only paves the way for the investigation of photocomposites based on metallic fillers through photochemical methods, but also broadens the potential application prospects.     

基于RHT模型双孔同时爆破均质岩体损伤的数值模拟

为探究双孔爆破时炮孔间距和额外自由面对爆破过程中爆破损伤的影响,基于RHT（Riedel-Hiermaier-Thoma）损伤本构建立了多组三维数值模型,利用模型损伤云图研究不同爆破条件下的岩石爆破过程,通过自定义变量—有效损伤率的变化探究炮孔周围岩石损伤的时空演化过程。结果表明：随着炮孔间距的增加,岩石有效损伤率逐渐递减,相同截面处的有效损伤率在炮孔间距最小的方案中最大,相邻炮孔间的爆破能量叠加作用随炮孔间距的增大而减弱,合适的炮孔间距可以获得更加理想的爆破效果;岩石有效损伤率随着自由面到炮孔中心处距离的增大而逐渐减小,爆破能量倾向于向自由面方向传播,额外自由面对爆破能量分布的影响随自由面与炮孔间距的增大而减弱。数值模拟结果对研究双孔爆破能量的传递法则具有一定的借鉴意义。     

黄铜中纳米级微裂纹的形核与钝化

黄铜薄膜试样在透射电镜中原位拉伸观察表明，在平衡条件下加载裂发出的位错纯化成无位错区，它是一个应变很高的异常弹性区。当缺口足够锐，外加载荷足够大时，这个非线弹性区中的应力有可能达到原子键合力，从而使纳米级微裂纹在无位错区中不连续形核，或从钝化的原裂纹顶端形核。这个微裂纹一昊形核，即使保持恒位移，也将钝化成空洞或缺口。     

锂离子电池正极材料第一原理计算研究

利用第一原理计算方法可分析和预测锂-金属氧化物电池正极材料在Li离子嵌入脱出过程中的电势和稳定性等性能。本文详细介绍了第一原理计算方法的理论背景以及目前LiCoO2正极材料计算研究的现状。利用此方法对LiNiO2及多组分材料掺杂进行研究是今后工作的重点。     

亚砜萃取Pd（Ⅱ）的结构及性能研究

系统研究了不同结构的二烷基(芳基)亚砜对Pd(Ⅱ)的萃取性能,以及亚砜的结构对萃取性能的影响,还研究亚砜-Pd(Ⅱ)配合物的结构.     

Sensing, modeling and control for laser-based additive manufacturing

Laser-Based Additive Manufacturing (LBAM) is a promising manufacturing technology that can be widely applied to part preparation, surface modification, and Solid Freeform Fabrication (SFF). A large number of parameters govern the LBAM process. These parameters are sensitive to the environmental variations, and they also influence each other. This paper introduces the research work in RCAM on improving the performance of the LBAM process. Metal powder delivery real-time sensing and control is studied to achieve a controllable powder delivery for fabrication of functionally graded material. A closed-loop control system based on infrared image sensing is built for control of the heat input and size of the molten pool in the LBAM process. The closed-loop control results show a great improvement in the geometrical accuracy of the built features. A three-dimensional finite element model is also established to explore the thermal behavior of the molten pool in the closed-loop controlled LBAM process.     

多元酚——甲醛树脂中游离酚,游离醛含量的测定

多元酚－－甲醛树脂是本院开发的热固粘接剂新产品，本文给出了这一产品技术指标中游离酚、游离醛含量的测定方法，并对方法进行了讨论。