双层推板式PTC隧道窑及其控制过程

针对目前工业化大生产Ｔｃ＝１２０，２４０℃等ＰＴＣ陶瓷，以其烧结机理和典型的烧成曲线为依据，设计建造出双层推板式电脑控制隧道窑，通过半年多生产实践表明：只要选择适当的配方，能够满足大规模连续生产的要求，其窑温控制精度在±２℃内，产品合格率大于９０％；日产量达１．８片左右（片子尺寸为２５×１５×２．８ｍｍ）；其正常消耗功率为３０ｋＷ左右吡同类窑节约１／４－１／３能源。     

ATO包裹硅酸锆的制备与应用

采用化学共沉淀技术制备了锑掺杂二氧化锡(ATO)包裹硅酸锆的导电粉体,对比了该导电粉体与ATO在防静电陶瓷中的应用效果。结果表明与掺纯ATO相比较,掺入ATO包裹硅酸锆的防静电陶瓷颜色比较浅,并且能明显减少氧化锡的用量,当陶瓷的表面电阻为107Ω/□量级时,用ATO包裹硅酸锆作为导电填料可以节省25%左右的ATO。     

dc Electrical Degradation of Perovskite-Type Titanates: I, Ceramics

The rate of the resistance degradation of doped SrTiO₃ ceramics is investigated as a function of various external and material parameters. The effects of the mutually interrelated parameters dc voltage, dc electric field, and thickness of the dielectric are described by power laws. Electron microscopic potential contrast studies show a Maxwell-Wagner polarization leading to a concentration of the electric field at the grain boundaries during the degradation. Based on this finding, the voltage step per grain boundary, ΔΘ_gb, is introduced as a rate-determining parameter which allows an explanation of the influence of the grain size on the degradation rate as well as the difference in the power laws for ceramic and single-crystal samples.     

Al2O3/SiC复合陶瓷的反应烧结

在空气中于1600℃对Al2O3/0.78%SiC纳米复合体进行2h的反应烧结,制得Al2O3/5%莫来石复合陶瓷,其中的莫来石分为两类,即3Al2O3·2SiC和Al5.65Si0.35O9.175。采用SEM和TEM研究Al2O3/莫来石复全陶瓷的微观结构。对Al2O3/莫来石复合陶瓷的密度和力学性能如杨氏模量、泊松比、硬度、韧性和强度进行了研究。     

Preparation of Porous Al2O3-Ceramics by Biotemplating of Wood

A new approach for preparing of microcellular ceramic materials is the reproduction of wood morphologies by biotemplating, where the structural features of the native wood are maintained in the ceramic product. Biomorphic Al₂O₃-ceramics were manufactured via the sol-gel route by repeated infiltration of low viscous alumina sols into wood preforms and subsequently sintered in air at 1550°C. The microstructure and phase formation during processing were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), density and porosimetry measurements. In contrast to conventional processed, highly-porous Al₂O₃-ceramics, the microstructure of the biomorphic Al₂O₃-ceramics is characterized by an uniaxial pore morphology with pore diameters in the micrometer range, depending on the initially used wood template.     

添加剂对化学镀铜的影响

研究了亚铁氰化钾和α，α′-联吡啶对陶瓷表面化学镀铜沉积速率、阻抗、镀层晶体结构和外观的影响。加入亚铁氰化钾，铜沉积速率降低，阻抗增大，镀层外观得到改善，镀层晶体呈无序生长；α，α′-联吡啶的加入对铜沉积的抑制更明显，镀层晶体取向为（2，2，0）。     

莫来石纤维多孔陶瓷负载性能研究

用酸性偏磷酸盐作粘结剂、加压排液法成型制备了孔隙率高达96％的莫来石纤维多孔陶瓷，采用真空浸渍法，对其负载稀土复合金属氧化物La0.8Sr0.2CoO3的性能进行了研究，考察了浸渍时间、浸渍次数对负载量的影响，得出最佳浸渍时间为60min，浸渍次数为2次。通过扫描电镜(SEM)表征了内部架构，最后指出莫来石纤维多孔陶瓷有望成为具有较好效果的新型催化剂载体。     

SHS of mineral-like ceramics for immobilization of radioactive nuclear wastes

Synthetic analogs of titanate ceramics (perovskite and zirconolite) designed for use as a matrix for immobilization of high-level nuclear fuel reprocessing wastes (HLW). Such ceramics have been prepared by SHS method from a mixture of titanate ceramics and non-radioactive model oxides. Synthesis conditions have been optimized. The synthesized low-porosity cylindrical compacts exhibited a high strength and low rate for leaching Cs, Sr, Y, Ce, and La in bidistilled water. The phase composition and microstructure of synthesized products have been characterized. The immobilization of Cs was found to be accompanied by a marked loss of this element. The text was submitted by the authors in English.     

掺锰BaTiO3 PTCR陶瓷的电子顺磁共振研究

利用电子顺磁共振（EPR）方法对Mn掺杂的BaTiO3 PTCR陶瓷在120－450K的温度范围内进行了研究，研究结果表明：高自旋Mn^2 离子的6重谱线非常明显，表征谱线位置的g因子为2．009 9,Mn^2 离子信号弱弱与BaTiO3晶体结构密切相关，Mn^2 离子信号的温度分布呈U型，即在三方相和立方相时，信号强度较强，而在四方相和斜方相时信号很弱，这是因为在四方相和斜方相中，由于BaTiO3晶体结构的扭曲和畸变，导致Mn^2 和Vo空位缔合生成Mn^2 -Vo复合缺陷，未成对电子的消失以及复合缺陷n^2 -Vo的生成最Mn^2 在四方相和斜方相（200－380K）消失的主因，实验中没有发现Mn^3 和Mn^4 的信号，而与实验的环境条件一致，掺Mn后样品Curie点的漂移可能是Mn进入晶格的一个判据，此外，由于试样的n(Ba)/n(Ti)=1，因而没有发现钡空位VBa及其它的复合缺陷（如：VBa-Mn^2 ,Mn^3 -Vo,La^3 -Mn^3 等），Mn^2 离子等电子陷阱的生长是Curie温度处电阻骤然增加的主要原因。