Dynamics of Solidification in 2% Corn Starch-Water Mixtures: Effect of Variations in Freezing Rate on Product Homogeneity

Directional solidification studies of gelatinized corn starch-water mixtures were undertaken in order to examine, in situ, the freezing behavior of this food model. The solidification rate was controlled by varying sample cell velocity as it moved from a 25°C hot stage to a -25°C cold stage. While freezing at cell velocities ≤7.5 μm/sec, starch granules were alternately pushed or entrapped by the advancing solid-liquid interface producing a segregated structure consisting of alternating high-starch and low-starch bands. At a cell velocity of 10 μm/sec, the frozen product was homogeneous. The relationship between the solid-liquid interface velocity and segregation behavior was quantified and compared to an existing model of particle-interface interactions.     

Quasi-static and dynamic crushing behaviors of aluminum and steel tubes with a cutout

Tubular members are commonly used as an energy absorber in engineering structures and many such members have a cutout. In this study, the crushing behaviors of tubes with a cutout are characterized and the effects of cutout on the energy absorption capabilities of these tubes are quantified. Systematic parametric studies were carried out to study the effect of material properties, including yield and ultimate strength of material, strain rate effect, location of cutout, tube length and impact speed on the crushing behaviors and energy absorption capacity of aluminum and steel tubes. First, a numerical model was constructed with a commercial explicit finite element code. It will be first proven that the numerical simulation can produce sufficiently accurate results in an economic manner. Subsequently, the crushing behavior of aluminum and steel tubes with a cutout was experimentally characterized and their energy absorption capacity was evaluated in terms of mean crushing force, peak crushing force and specific energy absorption (SEA). Tubes of various lengths with a cutout located at different locations, subject to both quasi-static and dynamic impact loadings were considered. For steel tubes, the numerical simulation investigated the influence of the strain rate effect and variation in strain hardening ratio of the material. Empirical equations describing the mean and peak crushing forces of aluminum and steel tubes with a cutout were developed using linear and nonlinear regression methods applied to the results obtained from the numerical and experimental studies.     

W-Cu材料室温强度和组织均匀性的影响因素

用浸透法对孔隙度为12%～17%的烧结钨进行了渗铜试验 ,研究了影响低铜含量的W -Cu材料室温бb及渗铜组织均匀性的因素 ,研究结果表明 ,铜对钨骨架的强化和韧化机制对提高W -Cu材料的室温бb 有重要作用 ;钨骨架具有合适的孔隙度是W -Cu材料获取均匀一致的渗铜组织的重要条件。     

CBGA组件热变形的2D-Plane42模型有限元分析

本文介绍有限元中的2D-Plane42模型在CBGA组件热变形中的应用，利用有限元的模拟CBGA组件的应变、应力的分布，通过模拟表明有限元法是研究微电子封装中BGA焊点、CBGA组件的可靠性的方法。     

Dynamic Bending Strains in Planar Trusses with Pinned or Rigid Joints

The method of reverberation ray matrix is applied to analyze the dynamic behavior of structural members in trusses with pinned joints subjected to suddenly applied force. The results are compared with those in planar trusses with rigid joints. Detailed calculations are made with two types of trusses, a small laboratory model made of slender aluminum bars, and a hypothetical real size Pratt truss made of structural steel. It is found that the maximum dynamic bending strains in the members of both types of trusses are very large, comparable with the dynamic axial strains in the same member. The magnitudes of bending strains in the pinned truss differs little from those in the truss with rigid joints for both types of trusses. Such a large dynamic bending strain in a structure member, which is contradictory to the static behavior of the same truss, could be caused by the inertial force of the mass in structural members of the truss.     

油,水二相流固耦合渗流的数学模型

为了正确模拟油藏中流体流动的动态过程，必须考虑由于注水和开采而引起的多相流体的流动、应力状态的变化和储集层变形之间复杂的相互作用。但由于这种问题的控制方程是三维非线性耦合方程，因此，很难模拟这种耦合作用。利用广义的Ｂｉｏｔ理论建立了一个完全耦合的数学模型，它描述可变形油藏中岩石变形和油水流动的这种相互作用。模型中假设岩石骨架具有弹塑性特性，流体是可压缩的。以岩石骨架位移和油水压力为未知变量所建立的控制方程，包括岩石骨架的平衡方程和流体（油、水）的连续性方程。所建立的流固耦合模型在石油工程，特别是在油藏数值模拟中有广泛的应用。参８（陈志宏摘     

A low cost calibration conditioner for dynamic strain gauge measurements

A conditioner for dynamic strain measurements that allows for a series of calibration signals with periodic and predefined time occurrence, during the whole period in which the measurements have to be carried out, is presented in this work. The calibration signals, having suitable size ratios between them, allow one to evaluate the linearity of the entire measurement chain.     

激光对陶瓷层的釉化处理

本文研究了激光重熔等离子体喷涂的陶瓷层。为了降低气孔率,获得好的微观结构和均匀性,减少覆盖材料的应力,提高涂层材料和基体的结合力,探讨了相间的结合机理,分析了重熔过程中出现的问题。     

材质对蜂窝纸板缓冲性能的影响

对两种不同材质的蜂窝纸板静态应力应变性能和动态缓冲结果进行了比较分析。讨论了蜂窝纸板力学性能对应变速度的敏感性及两种纸板的缓冲性能差异。缓冲试验结果表明。在不同的冲击应变率下蜂窝纸板的材质影响蜂窝纸板缓冲性能。     

基于数字图像分析的薄板成形应变场测量方法

对薄板成形应变场传统的测量方法进行了研究。指出了其不足和误差的来源，提出了数字图像分析法测量薄板成形中的应变场，对测量原理，新的测量方法对传统方法的改进，以及如何降低误差进行了介绍，指出数字图像分析法的前景，提出了改进意见。