羧甲基纤维素—丙烯酰胺接枝共聚最佳条件的研究

研究了羧甲基纤维素—丙烯酰胺接枝共聚反应,对初始pH值、引发剂用量、单体浓度、初始温度等因素对反应的影响进行了探讨,得到了最佳引发体系:H2SO4-KMnO4以及最佳反应条件:单体浓度30%、引发剂浓度500mg/L、初始温度30℃、初始pH值9。     

Photophysical studies of copolymers of N‐vinylcarbazole

The absorption, fluorescence excitation and emission spectroscopy, and time‐dependent spectrofluorimetry have been used to study the photophysics of copolymers of N‐vinylcarbazole with different monomers like vinyl acetate, methyl acrylate, methyl methacrylate, butyl acrylate, and butyl methacrylate in dichloromethane. In all the copolymers and at different N‐vinylcarbazole content, the absorption spectra reflect only the monomer carbazole units. The two kinds of excited monomer species of N‐vinylcarbazole are present in S₁ state. Short‐lived (～3 ns) excited monomer decays forming low energy excimer obtained by the complete overlap of the excited carbazole monomer. The long‐lived excited monomer (～8 ns) decays to ground state without formation of any excimer. The high energy excimer is relatively short‐lived and is formed by the partial overlap of the carbazole units. The presence of bulky group in the copolymer chain hinders the formation of excimers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 372–380, 2006     

高顺式丁二烯-异戊二烯共聚橡胶研究进展

综合评述了国内外高顺式丁二烯-异戊二烯共聚橡胶的研究进展，包括合成方法、结构与性能及其应用；并对其发展趋势进行了评述。     

Immobilization of a cyclodextrin glucanotransferase (CGTase) onto polyethylene film with a carboxylic acid group and production of cyclodextrins from corn starch using CGTase‐immobilized PE film

Carboxylic acid groups were introduced onto polyethylene (PE) film by radiation‐induced graft copolymerization. Subsequently, the clodextrin glucanotransferase (CGTase) was immobilized on the PE film with a carboxylic acid group. The activity of the immobilized CGTase on PE film was in the range of 0.40–1.04 U/cm² per min. The production of cyclodextrins (CDs) from corn starch was examined using the CGTase‐immobilized PE film. The production ratios of CDs using CGTase‐immobilized PE film was in the following order: α–CD > β–CD > γ–CD. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2451–2457, 2002     

Synthesis and fluorescence properties of aromatic‐aliphatic copolyamides

The aromatic‐aliphatic copolyamides were synthesized by condensation polymerization of aromatic diamine PPD (or APS, where PPD is p‐phenylene diamine and APS is aminophenyl sulfone), aliphatic diamine HDA (or EDA, where HDA is hexanediamine and EDA is ethylenediamine), and TPC (where TPC is terephthalyl chloride) with different molar ratios of aromatic diamine to aliphatic diamine. The steady‐state fluorescence of these condensed copolymers was investigated. These copolyamides exhibit strong blue‐to‐green fluorescence. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 315–321, 2005     

丙烯酸酯乳液的改性研究

制备了丙烯酸酯乳液,探讨了丙烯酸、N-羟甲基丙烯酰胺、二乙烯基苯、丙烯腈和三聚氰胺等不同改性剂对乳液性能的影响,在此基础上通过互穿网络聚合、化学共聚及物理共混等方法对乳液的性能进行了改性研究。     

Electrochemical copolymerization of aniline with m-aminophenol and novel electrical properties of the copolymer in the wide pH range

A copolymer, poly(aniline-co-m-aminophenol), has been synthesized using repeated potential cycling. The monomer concentration ratio, acid concentration and applied potential strongly affect the copolymerization rate and the properties of the copolymer. The optimum conditions for the copolymerization are that the scan potential range is controlled between −0.10 and 0.95 V (vs.SCE), and a solution consists of 0.34 M aniline, 0.012 M m-aminophenol and 2 M H₂SO₄. The IR spectra of the copolymers demonstrate that the m-aminophenol units are included in the copolymer chains. The cyclic voltammograms of the copolymers in 0.3 M Na₂SO₄ solution with various pH values were performed at the potential ranges from −0.20 to 0.80 V and at a scan rate of 60 mV s⁻¹. The results indicate that the copolymer still hold 41.7% of the electrochemical activity when the copolymer electrode was transferred from a solution of pH 5.0 to a solution of pH 11.0 in the potential range of −0.20 to 0.80 V. An impedance plot of the copolymer in a solution with pH 12.0 and at 0.40 V is constructed of a semicircle and a Warburg line with a slope of 1. This means that the electrode reaction of the copolymer at pH 12.0 is also under mass transfer control. The conductivity of the copolymer prepared under the optimum conditions is 1.42 S cm⁻¹, and slightly depends on the pH value. Thus, the pH dependence of the electrical properties of the copolymer is improved compared with poly(aniline-co-o-aminophenol), and is much better than that of the parent polyaniline.     

聚碳酸酯光学性能应用及改进研究进展

概述了光学级聚碳酸酯结构与光学性能的关系和其在光学领域的应用,对其光学异向性产生的原因进行了讨论,并对改善聚碳酸酯光学异向性的途径进行了归纳,通过采用共聚、共混方法可使聚碳酸酯的双折射得到有效的降低。     

新型后过渡金属烯烃催化剂的研究进展

综述了近年来－系列新型α－二亚胺型后过渡金属（Ni、Pd、Fe、Co）催化剂在烯烃聚合、极性单体共聚、烯烃齐聚、环烯烃加成聚合、烯烃活性聚合和聚烯烃纳米复合物等方面的最新进展。系统地阐述了不同的中心过渡金属离子、α－二亚胺骨架、骨架上的取代基和不同的聚合条件（温度、压力）分别对催化剂的聚合活性、聚烯烃支化率、聚合物分子量和分子量分布以及聚合产物的性质等影响，并且简要说明了这一类催化剂的制备方法和新特点。     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007