充填浮选柱捕集区气含率的试验研究

通过冷模试验方法考察了充填浮选柱捕集区的气含率，经试验数据回归分析，气含率εｇ＝０．０９６Ｊｇ０．９１（Ｈｃ／Ｄ）－０．１８。并结合漂移通量的理论，确定充填浮选柱的捕集区为近似均匀鼓泡流。     

熔块中的气泡缺陷及其解决办法

分析了熔块生产中气泡缺陷产生的各种原因．提出了实际生产中的注意事项和具体的解决办法。     

常压脱高硫浅议

就用常压塔脱高硫从流程设置、设备选择、工艺条件控制以及硫回收几方面进行讨论,并着重阐述了脱硫塔、再生槽的设计要求以及吸收、再生、熔硫的工艺条件。     

MathCAD软件对塑料发泡振动的模拟

气泡膨胀过程中产生的高频振动已达到超声波范围,对聚合物中纳米粒子的分散具有很好的作用。利用MathCAD模拟了气泡振动影响因素,分析了气泡内外压差、高聚物熔体的表面张力、应力松弛时间等因素对气泡振动的影响。通过分析,对气泡振动的工艺条件提出一些参考。     

热态下鼓泡浆液反应器的气含率研究

本文在热态条件下，研究了鼓泡浆液反应器的气含率、反应器直径为0.098m，物系组成为氮气－液体石腊－石英砂。考察了气速、压力、温度、静床高及固体引入等因素对气含率的影响。对于53μm粒子的三相浆态体系，气含率与表观气速关系式为εG=0.053uG^1.2。     

Chaos in bubbling—nonlinear analysis and modelling

In the present paper, nonlinear features and analytical results for the chaotic bubbling from a submerged orifice are described. A chain of air bubbles was produced from the single orifice of in diameter and micro-convection induced by the bubble generation was recorded using hot-probe anemometer located close to the orifice. The air flow rate was varied widely from q=100 to and the aspects of bubbling were observed by high-speed video. The nonlinear analysis is performed for the time series data of hot-probe anemometer especially in the range of q=435-. The calculated largest Lyapunov exponent shows that with increase of air volume flow rate, the time period for the process of liquid flow to lose stability becomes shorter and at high air flow rate such as , it is shorter than the time period between subsequent bubbles. To explain such chaotic behaviors of bubbling, a simple model has been proposed. The model simulates the process of interaction between the elastic bubble wall and liquid. Simulation results compared well with the analytical results of experimental data. Summarizing, it is concluded that one of the reasons for chaos appearance is the nonlinear character of interaction between an elastic bubble wall and the liquid stream.     

提高复合塔板操作弹性和通量研究

在内径为 5 0 0mm和 30 0mm的塔内 ,以空气 水为物系 ,测定了不同结构 (浮阀 筛孔穿流板、非均匀开孔率穿流板、双孔径穿流板 )的穿流板与 2 5 0Y规整填料组成的各种复合塔板的流体力学性能。试验结果表明 :浮阀 筛孔复合塔板操作弹性小、气液处理量小 ;非均匀板复合塔板与均匀板复合塔板相比 ,操作弹性大2 0 %— 6 0 % ,气处理量大 2 0 %— 80 % ,液处理量大 70 %左右 ;双孔径复合塔板比单孔径复合塔板处理量略微增大 ,操作弹性高达 3.5以上。     

Observation of 3‐D Structure of Bubbles in a Fluidized Catalyst Bed

The interface area between the bubble and emulsion phases in a fluidized catalyst bed is one of the important parameters used to analyze and design the fluidized bed reactor. We used a fast‐scanning X‐ray CT system to observe the bubble shape and structure. We then obtained the transient 2‐dimensional cross sectional gas‐phase distribution in a fluidized catalyst bed. Using image‐processing techniques, pseudo 3‐dimensional images of the bubbles were reconstructed. The bubble structure was studied based on the 3‐dimensional images and the previously obtained results in a 2‐dimensional fluidized bed. It was found that the bubble shape was not spherical but complicated, and that the bubbles ascending in a fluidized catalyst bed consisted of some smaller bubbles.     

模拟三相流化床中颗粒尺寸对单气泡传质系数的影响

本文在模拟三相流化床中,测量了单气泡的传质系数,实验结果表明颗粒直径对气-液传质系数影响显著。颗粒直径较大时,传质系数有明显提高。