织物涂层用聚氨酯

叙述了织物涂层在我国的发展前景以及聚氨酯涂层在织物涂层中的作用。强调水性聚氨酯涂层剂开发的必要性。     

Toxicity and Biodegradability Behavior of Xenobiotic Chemicals Before and After Ozonation: A Case Study with Commercial Textile Tannins

Ozonation of a natural tannin (NT; COD_o?=?1195 mg/L; TOC_o?=?342 mg/L; BOD_5,o?=?86 mg/L) and a synthetic tannin ST; COD_o?=?465 mg/L; TOC_o?=?55 mg/L; BOD_5,o?=?6 mg/L) being frequently applied in the polyamide dyeing process was investigated. Synthetic wastewater samples containing these tannins individually were prepared and subjected to ozonation at varying ozone doses (625– 1250 mgO₃/L wastewater), at pH?=?3.5 (the application pH of tannins) and pH?=?7.0 at an ozone dose of 1125 mgO₃/L wastewater. The collective environmental parameters COD, TOC, BOD₅, UV₂₅₄ and UV₂₈₀ (UV absorbance at 254 nm and 280 nm, representing aromatic and unsaturated moieties, respectively) were followed during ozonation. Changes in the biodegradability of the tannins were evaluated in terms of BOD₅ measurements conducted before and after ozonation. In addition, activated sludge inhibition tests employing heterotrophic biomass were run to elucidate the inhibitory effect of raw and ozonated textile tannins towards activated sludge biomass. Partial oxidation (45% COD removal at an ozone dose of 750 mg O₃/L wastewater and pH?=?3.5) of ST was sufficient to achieve elimination of its inhibitory effect towards heterotrophic biomass and acceptable biodegradability improvement, whereas the inhibitory effect and biodegradability of NT could not be reduced via ozonation under the same reaction conditions.     

基于吲哚类半花菁染料的钯比率荧光探针

利用6-羟基萘-2-醛和碘化N-乙基-2,3,3-三甲基-3H-吲哚啉季铵盐的缩合反应生成的羟基半花菁染料2与氯甲酸烯丙酯的反应合成了荧光比率型钯探针1.研究表明:在含水介质中,探针1对钯(Pd0和Pd2+)显示出很高的敏感性、选择性和抗干扰性,其荧光比率增强大约72倍,对Pd2+的最低检测极限为0.23μmol/L.探针1对钯的作用机理是钯催化碳酸烯丙酯断裂导致比率荧光变化.     

功能化磁性微球对溶剂绿7的吸附性能研究

为了有效地去除工业染料废水中的有机染料,本文以水热合成法制备出Fe3O4纳米微球,并将其表面包覆功能化外壳,得到新型的磁性吸附剂.并详细讨论了温度、浓度、pH等因素对染料吸附效果的影响.实验结果表明,吸附剂对溶剂绿7具有较好的吸附能力,随着染料浓度的增大,吸附量显著增大,溶液的温度升高,吸附量降低;较低的pH有助于吸附作用的发生,当pH=2时,脱色率达到95%.鉴于此新型磁性吸附剂良好的吸附性能及低廉的制备成本,很有潜力应用于工业印染废水的脱色处理中.     

Effects of Cu(Ⅱ） or Zn（Ⅱ） on photodegradation of some toxic organic compounds in wastewater by using TiO2 as catalyst

1　ＩＮＴＲＯＤＵＣＴＩＯＮＯｘｉｄａｔｉｏｎ ,ｒｅｄｕｃｔｉｏｎ ,ａｎｄａｄｓｏｒｐｔｉｏｎｕｓｕａｌｌｙａｒｅｇｏｏｄｍｅｔｈｏｄｓｔｏｒｅｍｏｖｅｏｒｇａｎｉｃｃｏｍｐｏｕｎｄｓｉｎｗａｔｅｒ ,ａｎｄｔｈｅｃｏｍｂｉｎａｔｉｏｎｏｆｔｈｅｓｅｍｅｔｈ     

Aggregate‐induced emission in light‐emitting liquid crystal display technology

Nowadays, liquid crystal displays (LCDs) with light‐emission are considered as energy‐efficient devices and are promising alternatives to conventional LCDs. To realize such possibility, strong fluorescent materials with a dichroic properties are required. Aggregate‐induced emission (AIE) is an unusual photophysical phenomenon shown by some luminogenic materials that will be highly emissive in their aggregate state. In this work, we studied the AIE effect of a luminescent liquid crystalline molecule TPE‐PPE in our LC system as a luminophore dopant. The result showed the excellent AIE effect that higher concentration of luminogen in the nematic LC host induced stronger luminescent intensity. Through exposure of a photoisomeriable alignment material sulfonic‐dye‐1, the photopatterning of a light‐emitting LC device was achieved with the use of the TPE‐PPE/nematic LC mixture.     

酸性桃红3B染料废水治理方法的探讨

桃红染料废水水质成分复杂、ＣＯＤ_ｃｒ及色度高、酸性极强,治理难度大。经工艺试验、比较,找出了可行的治理工艺方案,采用“以废治废”的方法,用废碱液（或印染废水）提高ｐＨ值,再经混凝、沉淀、出水回流等工艺,使废水治理获得较满意的效果,据此提供了有关工艺试验的数据、治理工艺技术条件及治理工艺流程。     

A Boronate Ester Driven Rechargeable Antibacterial Membrane for Fast Molecular Sieving

Membrane decorated with biocides is an effective way to suppress biofilm growth. However, their immediate biocidal effect usually suffers from a significant decline due to the irreversible consumption of the biocides. Here, a smart nanofiltration membrane is reported with rechargeable antibacterial capability that is fabricated by a facile interfacial polymerization via 3-aminophenylboronic acid and trimesoyl chloride on a polysulfone substrate. Biocides bearing diol groups can be grafted onto the membrane surface under neutral/alkaline condition and then released from the surface under acidic environment, due to the pH-responsive feature of boronate ester complexes. The resultant membrane exhibits integrated properties of fast bacterial inactivating efficiency, rechargeable antibacterial capability, and impressive stability. In addition, the achieved membrane shows remarkable separation efficiency to dye/monovalent salt system. The successful fabrication of the membrane with rechargeable anti-bacterial property provides new insights into the development of pH-responsive and sustainable antibacterial membranes.     

Defect‐Laden MoSe2 Quantum Dots Made by Turbulent Shear Mixing as Enhanced Electrocatalysts

A high density of edge sites and other defects can significantly improve the catalytic activity of layered 2D materials. Herein, this study demonstrates a novel top‐down strategy to maximize catalytic edge sites of MoSe₂ by breaking up bulk MoSe₂ into quantum dots (QDs) via “turbulent shear mixing” (TSM). The ultrasmall size of the MoSe₂ QDs provides a high fraction of atoms in reactive edge sites, thus significantly improving the catalytic activities. The violent TSM further introduces abundant defects as additional active sites for electrocatalytic reactions. These edge‐proliferated and defect‐laden MoSe₂ QDs are found to be efficient electrocatalysts for the hydrogen evolution reaction, and useful as counter electrodes in dye‐sensitized solar cells. The work provides a new paradigm for creating edge‐proliferated and defect‐rich QDs from bulk layered materials.     

Novel transcatheter aortic heart valves exhibiting excellent hemodynamic performance and low-fouling property

Transcatheter aortic heart valves (TAHVs) have been widely used for aortic valve replacements, with less trauma and lower clinical risk compared with traditional surgical heart valve replacements. In the present study, composites of poly(ethylene glycol) diacrylate (PEGDA) hydrogels and anisotropic high-shrinkage polyethylene terephthalate/polyamide6 (PET-PA6) fabric (PEGDA/PET-PA6) were fabricated as artificial heart valve leaflets. Dynamic mechanical analyses (DMA) indicated that PEGDA/PET-PA6 composites possessed anisotropic mechanical properties (i.e., storage moduli ～23.30 ± 1.36 MPa parallel to the aligned fabric fibers and ～9.68 ± 0.90 MPa perpendicular to the aligned fibers at 1 Hz) that were comparable to aortic valve leaflets. The PEGDA/PET-PA6 composites with smooth surfaces were highly hydrophilic (contact angle ～41.6° ± 3.8°) and had low-fouling properties without platelet adhesion, suggesting a low risk of thrombogenicity when they interacted with blood. Furthermore, transcatheter aortic heart valves were fabricated using nitinol self-expanding frames and PEGDA/PET-PA6 composites as artificial leaflets, which presented excellent hemodynamic performance with a large orifice area (1.75 cm²) and low regurgitation (3.41%), thus meeting the requirements of ISO 5840-3 standard. Therefore, PEGDA/PET-PA6 composites had suitable mechanical properties, good biocompatibility, and low-fouling properties, indicating that they might be used for TAHVs in the future.