Thermal comfort of patients: Objective and subjective measurements in patient rooms of a Belgian healthcare facility

In healthcare facilities, the prediction of mean thermal comfort perception of patients and staff is necessary to formulate requirements for the architectural and building systems design and control, and for establishing guidelines for the use of clothing and bedding systems.     

Experimental tile with phase change materials (PCM) for building use

The use of phase change materials (PCM) and their possible architectural integration is a path in the search for optimizing energy efficiency in construction. As part of this path, a pavement has been designed which, in combination with the PCM, serves as a passive thermal conditioning system (new patent n°. ES2333092 A1) [1]. The prototype has been tested experimentally and the results proved that it is a viable constructive solution improving the energy performance of sunny locals.     

Study of the geometry of a voided clay brick using non-rectangular perforations to optimise its thermal properties

This study seeks to improve the geometrical distribution of bricks to optimise the equivalent thermal transmittance of a wall built of Termoarcilla^® ECO 29 voided clay bricks, using calculations according to Spanish UNE [1], AENOR [10], European EN [6], [7], [8] and [9] and international ISO [11] and [12] standards.The objective is to study improvements in the wall's thermal conductivity, always remembering the limitations imposed by the manufacturing process. Simulations are made using a finite elements application [14].It is concluded that, within the possibilities allowed by the manufacturing process, with non-rectangular voids the heat flux has to cross a higher number of voids, which improves its thermal properties. A rhomboid layout of voids with the longer diagonal at right angles to the heat flux is the best internal void layout. If the internal perforations are also extended to the end of the tongue and groove, the direct thermal bridge in this type of brick is broken.Finally, a 290 mm wide brick with 25 rows is obtained with the geometrical properties described above which shows an improvement of almost 16% over the original ECO 29 brick, performing well in all climatic areas of Spain, with a full-bed mortar joint 30 mm thick.     

Synthesis of zirconium tungstate–zirconia core–shell composite particles

In this work, ZrW₂O₈–ZrO₂ core–shell composite particles were synthesized. ZrW₂O₈ that was used in the core is a material with negative coefficient of thermal expansion, and it was synthesized from a high-pH precursor based on use of tungstic acid and zirconium acetate. Shell layer was composed of ZrO₂ nanocrystallites and precipitated from an aqueous solution by urea hydrolysis. While volume of the shell was effectively controlled by the initial zirconium ion concentration in the solutions, the rate of precipitation was a function of the ratio of initial concentrations of urea to zirconium ions. It is hypothesized that isolation of the ZrW₂O₈ within a layer of ZrO₂, will be a key element in solving problems associated with reactivity of ZrW₂O₈ towards other components in sintering of ceramic–ceramic composites with tuned or zero thermal expansion coefficient.     

Thermal conductivity measurement of the epoxies and composite material for low temperature superconducting magnet design

The thermal conductivities of solid materials were measured by a G-M cryo-cooler based apparatus in the temperature range of 2.6–21.0 K. The performance of this apparatus was verified by measuring the thermal conductivity of 304-stainless steel, and good reproducibility as well as accuracy was shown when compared with the certified values. The thermal conductivities of EC1017 and Stycast2850FT and a composite material were measured. Similar behavior to amorphous materials was shown for EC1017 and Stycast2850FT in that there was an apparent plateau, which could be ascribed to a very lower crystallinity of epoxy. An equivalent model was proposed to predict the thermal conductivity of the composite material.     

Small-scale experiments of self-sustaining decomposition of NPK fertilizer and application to events aboard the Ostedijk in 2007

Small-scale experiments to investigate the self-sustaining decomposition (SSD) behaviour of NPK 16.16.16 fertilizer have been undertaken. These experiments show that this material will undergo self-sustaining decomposition and are used to give insight into the behaviour of the reaction. A three-step decomposition process is observed leading to a self-sustained reaction reaching temperatures of 200–350 °C. The measured heat of reaction is 0.73–1.8 MJ/kg. Measurements are applied to the events that occurred aboard the ship Ostedijk in 2007 in which a SSD reaction occurred. The mass loss rate from the cargo was calculated to range from 0.5 kg/s on the first day to 12 kg/s on the last day. From this measurement, the maximum fire size was estimated to be in the range 5.8–29 MW.     

Statistical analysis and modeling of the temperature-dependent sleep behavior of drosophila

The sleep behavior of drosophila is analyzed under different temperatures. The activity per minute of the flies is recorded automatically. Sleep for a fruit fly is defined as the periods without any activity and longer than 5 minutes. Several parameters such as total sleep time, circadian sleep profile, quality of sleep are analyzed. The sleep behaviors are significantly different for flies at different temperature. Interestingly, the durations of daytime sleep periods show a common scale-free power law distribution. We propose a stochastic model to simulate the activities of the population of neurons which regulate the dynamics of sleep–wake process to explain the distribution of daytime sleep.     

Effects of repeated exposures to severely cold environments on thermal responses of humans

Abstract

This study was conducted to investigate the effects of different exposure rates on thermal responses with the total cold exposure time the same under each of the conditions. After resting in a warm room (25°C) for 10 minutes, six male students wearing standard cold protective clothing entered an adjoining cold room (— 25°C). Each 5-, 10- and 20-minute cold exposure was repeated 12, 6 and 3 times, respectively. Each cold exposure was followed by a similar duration of rest at 25°C. Total cold exposure time was the same under the three conditions. Rectal temperature, skin temperatures, blood pressure, 17-hydroxycoyticoids (OHCS), counting task and subjective responses were measured. At the end of the cold exposure skin temperatures in the shorter exposures were higher than those in the other conditions, except on the foot. Discomfort due to cold was less in the shorter exposures and manifestation of discomfort was delayed. However, there were no differences among the three conditions in the fall of rectal temperature and urinary excretion of 17-OHCS, which are good indices of cold stress, Moreover, increase in blood pressure and decrease in counting task due to cold were not different among the three conditions. Even though the cold exposure time for each stay was short, when cold exposures were repeated frequently, cold stress of the whole body and decrease in manual task performance were the same as in the longer cold exposure.     

Synthesis of WSi2 -SiC composite under the thermally activated combustion mode

Opportunities on combustion synthesizing the WSi2-SiC ceramic composites in a wide range of compositions under the thermal activated mode were studied. Tungsten, silicon powders and carbon black were used as initial reagents, and Magnesium–Teflon mixture was used as an activating additive. The stepwise character of the combustion process evolution, being characterized by low- and high-temperature regimes, was revealed. The end-products were subjected to SEM, XRD and DTA/TG analyses.