Non-isothermal reaction-diffusion systems with thermodynamically coupled heat and mass transfer

Non-isothermal reaction-diffusion (RD) systems control the behavior of many transport and rate processes in physical, chemical, and biological systems. A considerable work has been published on mathematically coupled nonlinear differential equations of RD systems by neglecting the possible thermodynamic couplings among heat and mass fluxes, and reaction velocities. Here, the thermodynamic coupling refers that a flux occurs without its primary thermodynamic driving force, which may be gradient of temperature, or chemical potential, or reaction affinity. This study presents the modeling equations of non-isothermal RD systems with coupled heat and mass fluxes excluding the coupling of chemical reactions using the linear non-equilibrium thermodynamic approach. For a slab catalyst pellet, it shows the dynamic behavior of composition and temperature profiles obtained from the numerical solutions of non-linear partial differential equations by Mathematica for two industrial reaction systems of synthesis of vinyl chloride and dissociation of N₂O.     

Oxidative coupling of methane over CaO-MgO mixed oxide

Mixed oxide catalyst prepared by co-precipitating magnesium oxide and calcium oxide showed an excellent activity for the oxidative coupling of methane. The high performances were presumed to arise from the high basicity of the mixed oxide.     

On Modulus and Fracture Toughness of Rigid Particulate Filled High Density Polyethylene

A Kaolin-filled, high-density polyethylene (HDPE) system was used to illustrate the influence of particulates on modulus and toughness of the bulk material. A variation of filler content, particulate size and coupling quality for two HDPE-matrix systems with different viscosity led to a strong dependency of elastic modulus and fracture toughness under various testing conditions, e.g. static loading, fatigue and impact.

A stiffness improvement with increasing filler content was achieved by all coupling qualities. The developed Kaolin reinforcement of HDPE with optimised coupling offers an improvement of the stiffness and toughness under all investigated loading conditions. The degree of improvement depends on the particulate size and matrix viscosity. The energy dissipation mechanisms were investigated by fractographic analysis.     

聚二烷基硅烷的合成及其表征

以二甲基二氯硅烷、二苯基二氯硅烷为原料，通过Wurtz还原反应合成出聚二甲基硅烷、聚二苯基硅烷，并用UV、^1H NMR、FT—IR以及GPC、DSC—TGA等方法进行了光谱分析和结构表征。     

自热制氢反应器研究进展

介绍了同心圆式反应器、板式反应器、壁反应器、微通道反应器在自热重整反应制氢中的特点。同心圆式反应器的传热是控制步骤,为强化传热而开发了空间形状不同和流体经过反应器不同腔体的先后顺序不同的反应器;板式反应器易于组装、拆卸和放大,而且热效率也比较高,是目前十分活跃的研究领域,重点在于操作参数和设计的优化及其高效壁载制氢催化剂的研制;壁反应器的反应表面和换热表面不分离,具有较高的热量耦合效果;微通道反应器具有优越的传热性能,但对加工和流体的性质有比较苛刻的要求。另外,不同燃料制氢机理的研究及其过程参数的稳态、瞬态模拟,为反应器的设计提供了理论依据。而制氢过程并行单元的研究为系统的集成奠定了基础。最后,指出开发板式壁反应器以及开展其在CO变换、净化方面的研究有较好的发展前景。     

On the oxidative coupling of methane with carbon dioxide over CeO2/ZnO nanocatalysts

The nano-CeO₂/ZnO catalysts were prepared using a novel combination of homogeneous precipitation with micro-emulsion for oxidative coupling of methane with CO₂ as an oxidant. The prepared catalysts were compared with those prepared using the conventional impregnation. The catalysts prepared in two ways were characterized with FTIR, TEM, XRD and CO₂-TPD. The effects of the reaction temperature, the amount of ZnO doped in the catalysts and the average size were investigated. The experimental investigation demonstrated that methane conversion over the nano-CeO₂/ZnO catalysts prepared by the combined technique was higher than that obtained over catalysts prepared by the conventional impregnation. A better low-temperature activity has also been achieved over the nanocatalysts. There was no clear trend between the average size of nano-CeO₂/ZnO catalysts and their catalytic performance but methane conversion increased with increasing fractal dimension of nanocatalysts.     

超重力反应结晶法纳米碳酸钙浆料及粉料的表面处理

研究了脂肪酸盐A、水溶性铁酸酯偶联剂B（B1)以及铁酸酯偶联剂C对新型超重力反应结晶法所得的纳米CaCO3浆料及粉料的湿法表面处理的配方与工艺，确定了A体系的最佳改性时间为30～40min、改性温度为40～50℃、改性剂用量(质量分数)为3%～5％；B(B1)体系搅拌强度必须很高，改性时间30～40min，改性温度80℃左右，改性剂用量(质量分数)3％～5％；C体系的最佳改性时间为30～40min，改性剂用量(质量分数)为3％～5％。同时，采用红外光谱对改性前后的纳米碳酸钙进行了表征，表明改性刑已连接至CaCO3表面。最后，用分散稳定模型简要分析了改性机理。     

4-硝基-4′-N,N-二(2-羟丙基)氨基偶氮苯的合成与表征

以苯胺、环氧丙烷为原料制备了N,N 二(2 羟丙基)苯胺(NHPPA),然后NHPPA与对硝基苯胺通过重氮偶合反应制备了一种具有推拉电子结构的偶氮化合物4 硝基 4′ N,N 二(2 羟丙基)氨基偶氮苯(NHPA)。用元素分析、核磁共振、红外光谱分析了NHPA的结构,用紫外可见光谱研究了NHPA的吸收特性,在260和400nm附近发现特征吸收峰。并探讨了反应时间以及苯胺与环氧丙烷的量比对N,N 二(2 羟丙基)苯胺产率的影响,发现适宜的反应条件为:n(苯胺)∶n(环氧丙烷)=1 0∶2 3,反应时间为4h,相对于苯胺的产率可达92%。     

阳离子型偶联表面活性剂改性硝酸铵性能研究

对阳离子型偶联表面活性剂膨化处理的改性硝酸铵进行了电镜扫描、孔径与孔容分布、粒径分布、比表面积、抗吸湿结块性及爆炸性能的实验研究，结果表明：同普通硝酸铵相比，阳离子型偶联改性硝酸铵的晶形不规则，富含气孔；比表面积大，可达3869．56cm^2／g；95％有效孔径处于介孔范围，有较小的粒径范围，主要分布在10～1000μm范围内；并且有良好的抗吸湿结块性，改性硝酸铵的吸湿率比普通硝酸铵的吸湿率降低约60％，抗压破坏力仅为普通硝酸铵的1／6，用其制得的粉状工业炸药具有更好的物理性能和爆炸性能。