基于温湿度变化对蒸压加气混凝土墙体变形影响试验研究

本文对加气混凝土墙体在温湿度变化下的开裂问题进行试验研究。通过调整内外墙体温度、湿度变化研究加气混凝土砌块应力应变的变化规律;利用ANSYS软件理论分析温差对墙体应力应变的影响。结果表明:随着内外墙体温差的增大,加气混凝土墙体的应变值越大;随着湿度的变化,应变值的变化不大。     

浅谈小高层外墙渗水及封堵

在剪筒结构中,模板加固大量使用对拉螺杆,优点是加快了工期,节约了成本,但外墙的螺杆洞和外窗四周渗漏一直是质量通病。经查阅资料,结合现场施工,对外墙螺杆洞和窗四周的封堵防水提出了有效地修补方法。     

日照苏家村遗址出土钱山漾文化陶鬶的产地研究

日照苏家村遗址位于鲁东南沿海地区,是大汶口文化晚期至龙山文化早中期一处重要的环濠聚落。该遗址新出土的钱山漾文化细长颈袋足鬶(M45:5)作为目前已知南方系陶鬶布最北的一件,揭示出公元前2300年前后中国南北方的区域文化交流。本文通过对苏家村出土钱山漾文化红陶鬶、其他龙山文化红陶鬶及部分苏家村黑陶的主、微量元素分析,结合主成分分析揭示了苏家村本地生产钱山漾文化红陶鬶的可能性,表明龙山文化早中期的制陶业的发展可能伴随着南方系制陶工匠的迁徙。     

Mechanical properties of nano-structured Ti-Si-N films synthesized by cathodic arc evaporation

Ti_1−xSi_xN coatings were synthesized by cathodic arc evaporation with plasma-enhancing filter duct, using Ti₈₀Si₂₀ alloy target as cathodes. Optical emission study revealed that excitation, ionization and charge transfer reactions of the Ti-Si-N plasma occurred during the Ti_1−xSi_xN deposition process. The chemical content of Si varied from 3.3 to 6.0 at% in Ti_1−xSi_xN depending on the nitrogen partial pressure of the reaction chamber. All the Ti_1−xSi_xN coatings displayed a NaCl structure and a preferred (2 0 0) orientation parallel to the substrate surface. Among the studied Ti_1−xSi_xN coatings, the Ti_1−xSi_xN with 6 at.% Si possessed the highest hardness of 45 GPa and H³/E*² ratio of 0.527 GPa, indicating the best resistance to plastic deformation. We found that the structure and mechanical properties of the Ti_1−xSi_xN films were correlated with the nitrogen pressure and silicon content of the coatings.     

影响薄壁球墨铸铁白口倾向和球墨数量的因素分析

研究了不同的冷却速度、稀土加入量、碳量、硅量、Si／C、Mn／S及孕育处理等工艺时薄壁球墨铸铁球墨数量和白口深度的影响。结果表明，随着冷却速率增加，薄壁球墨铸铁石墨小球越多，但容易产生白口。冷速较大时，加入稀土元素进行孕育和控制碳当量，可以有效的消除薄壁球墨铸铁的白口现象，当Si／C大于0．80、Mn／S大于20时薄壁件白口倾向较小。     

Surface morphology of sputtered NiTi-based shape memory alloy thin films

The effect of substrate condition and annealing treatment on the surface morphology of sputter-deposited NiTi-based thin films was studied by means of atomic force microscope. It is found that the surface of the film deposited at 450 °C on a (100) Si wafer is composed of large island groups, consisting of islands of 150–300 nm in diameter. Annealing treatment at 400 °C results in a more homogeneous distribution of the island size. However, for the film deposited at 450 °C on a (111) Si wafer, its surface consists of more homogeneous islands, being about 200–250 nm in diameter. For the film deposited at 450 °C on a SiO₂ buffer layer on top of the Si-substrate, the surface islands have ideal spherical shape. After annealed at 650 °C, the islands have grown to about 300 nm in width and 550 nm in length. The surface roughness of the deposited film is related not only to the island sizes but also to the island distributions.     

镁合金双辊薄带连铸技术的研究现状及进展

双辊薄带连铸技术作为一种有潜力的镁合金板带材生产技术,其研究开发正受到国内外的关注。本文总结了镁合金双辊薄带连铸技术的研究概况,尤其是镁合金双辊薄带连铸工艺开发、薄带组织和性能研究以及薄带凝固过程的数值模拟等方面取得的进展,指出了该技术目前还存在的问题,并对今后的发展进行了展望。     

薄壁钢管切割夹具设计

针对薄壁钢管加工过程中存在的装夹效率低、加工精度差等问题,设计一种从钢管内部夹紧、加工范围大、一次装夹可实现多次多段切割的新型夹具,分析夹具整体结构特点和受力情况,对于提高钢管切割效率、保证切割精度、优化工艺过程起到了积极作用。