5,7-二甲基-1,2,4-三唑并[1,5-a]嘧啶-2-芳磺酸酯新型化合物的合成及生物活性

三唑类化合物具有广泛的生物活性。以2-羟基-5,7-二甲基-1,2,4-三唑并[1,5-a]嘧啶为原料,在缚酸剂存在下,于室温分别和苯磺酰氯、对甲苯磺酰氯进行酯化反应,合成了两个新型的5,7-二甲基-1,2,4-三唑并[1,5-a]嘧啶-2-芳磺酸酯化合物a和b。产物经质谱、红外光谱、核磁共振谱确证。初步生物活性表明,该化合物具有一定的杀菌活性和除草活性,其中a有较高除草活性,而b对禾本科植物有较好的促进生长活性。     

浅述毒死蜱的合成

介绍了毒死蜱及其中间体三氯吡啶酚合成路线及方法,并对其合成路线进行简单述评。     

CrHZSM-5 Zeolites – Highly Efficient Catalysts for Catalytic Cracking of Isobutane to Produce Light Olefins

The CrHZSM-5 catalysts with trace amount of Cr were firstly used for catalytic cracking of isobutane, and the effect of Cr-loading on the catalytic performances of CrHZSM-5 catalysts for the cracking of isobutane was also studied. The results suggested that when the loading of Cr in the CrHZSM-5 catalysts was less than 0.038 mmol/g Cr, especially at Cr loading of 0.004 mmol/g, both the reactivity of isobutane cracking and the selectivity to light olefins of CrHZSM-5 samples were greatly enhanced compared with the unpromoted HZSM-5, and very high yields of olefins(C₂+C₃) and ethylene were obtained. For instance, the yield of olefins(C₂+C₃) and ethylene reached 56.1% and 30.8%, respectively, at 625 °C when 0.004 mmol/g Cr was loaded on HZSM-5 sample.     

Li-intercalation behaviour of vanadium oxide thin film prepared by thermal oxidation of vanadium metal

In order to produce thin films of crystalline V₂O₅, vanadium metal was thermally oxidised at 500 °C under oxygen pressures between 250 and 1000 mbar for 1-5 min. The oxide films were characterised by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), X-ray diffraction (XRD) and Rutherford backscattering spectrometry (RBS). The lithium intercalation performance of the oxide films was investigated by cyclic voltammetry (CV), chronopotentiometry and electrochemical impedance spectroscopy (EIS). It was shown that the composition, the crystallinity and the related lithium intercalation properties of the thin oxide films were critically dependent on the oxidation conditions. The formation of crystalline V₂O₅ films was stimulated by higher oxygen pressure and longer oxidation time. Exposure for 5 min at 750 mbar O₂ at 500 °C resulted in a surface oxide film composed of V₂O_5, and consisting of crystallites up to 200 nm in lateral size. The thickness of the layer was about 100 nm. This V₂O₅ oxide film was found to have good cycling performance in a potential window between 3.8 and 2.8 V, with a stable capacity of 117 ± 10 mAh/g at an applied current density of 3.4 μA/cm². The diffusion coefficients corresponding to the two plateaus at 3.4 and 3.2 V were determined from the impedance measurements to (5.2 and 3.0) × 10⁻¹³ cm² s⁻¹, respectively. Beneath the V₂O₅ layer, lower oxides (mainly VO₂) were found close to the metal. At lower oxygen pressure and shorter exposure times, the oxide films were less crystalline and the amount of V⁴⁺ increased in the surface oxide film, as revealed by XPS. At intermediate oxygen pressures and exposure times a mixture of crystalline V₂O₅ and V₆O₁₃ was found in the oxide film.     

二烯酮类化合物在构建复杂有机化合物中的应用

二烯酮作为一类具有多个化学反应位点的不饱和酮类化合物,可与多种反应底物实现不同类型的化学转化,高效快捷地构建功能各异的有机化合物。该文综述了近些年二烯酮类化合物与多种反应底物的化学转化,首先探讨了2,5-环己烯酮类二烯酮与不同试剂的串联Michael-Smiles环丙烷化反应、环加成反应、三组分Ritter反应、光化学重排反应和氧化偶联反应分别构建了环丙烷类衍生物、含氟烷基N,O-缩酮类衍生物、稠环吲哚类化合物、酰胺类化合物和不对称的联芳烃类化合物,接着分析了1,4-戊二烯-3-酮类二烯酮与丙二腈（硝基甲烷）、硫氢化钠、氧化吲哚、吡唑酮、芴和巴比妥酸双Michael加成反应,分别合成了多取代环己酮类化合物、二芳基噻喃酮类化合物、螺环氧化吲哚类化合物、螺环吡唑酮类化合物、螺环芴类化合物和螺环巴比妥类衍生物,然后研究了2,4-戊二烯-1-酮类二烯酮的1,4-共轭加成、氮杂Michael加成反应、分子内MBH反应、分子内还原Aldol反应、分子内Aldol反应和分子内[4+2]环加成/氧化反应分别实现了有机含硫化合物、有机含氮化合物、多取代茚酮类化合物和SGLT2抑制剂——托格列净关键中间体的制备,最后对二烯酮在后续化学反应中的潜在应用进行了展望。     

甲壳素制备含氮化学品的研究进展

甲壳素可转化为多种高附加值产品和系列化学品。该文综述了以甲壳素及其降解产物N-乙酰氨基葡萄糖转化制备平台化合物3-乙酰氨基-5-乙酰基呋喃和其他含氮化合物等化学品的最新研究进展。对以3-乙酰氨基-5-乙酰基呋喃作为平台化合物进一步转化为其他化合物进行了概述，并对这些领域的研究方向进行了展望，以期促进甲壳素转化含氮化学品领域的发展。     

基于密闭爆发器试验的发射装药内弹道性能预估

为了预估发射装药的内弹道性能,建立了一种基于密闭爆发器试验检测发射药的静态燃烧性能参数进而预测其装药内弹道性能的方法,采用不同批次的单樟-5/7发射药进行了装药性能预估计算,并基于30 mm火炮对内弹道性能预估精度进行了试验验证。结果表明,采用所建立的基于密闭爆发器试验的发射装药内弹道性能预估方法计算获得的最大膛压为376.0 MPa,与试验测试的膛压平均值388.7 MPa的计算误差为3.27%;计算的炮口初速为1143.5 m/s,与试验测试的炮口初速平均值1156.3 m/s的计算误差为1.11%。所建立的基于密闭爆发器试验的发射装药内弹道性能预估方法具有较高的精度,可对发射药样品不同批次间的内弹道性能进行高效精确的预估,为长期贮存发射药使用寿命的判定及发射药产品的出厂校验提供了一种高效低成本的弹道性能评价方法。     

纤维素典型热解产物生成机理研究进展

利用生物质热解来生产液体燃料和高价值化学品受到广泛的关注,对生物质组分热解机理的研究有助于对生物质热解规律的理解和对热解过程的调控。对纤维素热解及其典型热解产物如脱水糖类、呋喃类以及小分子化合物等的生成机理进行综述,并指出后续的研究应该选用合适的模化物;为实现纤维素的高值化利用,还应对纤维素在不同类型催化剂作用下的催化热解机理进行研究。     

Enhanced production of hydroxymethylfurfural from fructose with solid acid catalysts by simple water removal methods

This paper demonstrates two simple ways to increase 5-hydroxymethylfurfural (HMF) yield (selectivity) in fructose dehydration with various solid acid catalysts. One is a water removal from the reaction mixture by a mild evacuation at 0.97 × 10⁵ Pa; it increases HMF yield for various catalysts (heteropoly acid, zeolite, and acidic resin). The removal of water suppresses two undesired reactions: the hydrolysis of HMF to levulinic acid and the reaction of partially dehydrated intermediates to condensation products. The other method is a decrease in the particle (bead) size of the resin (Amberlyst-15). The crushed and sieved Amberlyst-15 powder in a size of 0.15–0.053 mm shows 100% HMF yield at high fructose concentration (50 wt.% in DMSO), which is to our knowledge the highest yield to date. Near-infrared spectroscopic characterization of adsorbed water suggests that the enhanced yield can be caused by an improved removal of adsorbed water in a small-size resin particle.     

2,5-二取代-1,3,4-噻二唑类化合物的合成及应用研究

1,3,4-噻二唑类化合物是含有N、S原子的五元杂环化合物,具有重要的化学和生物应用价值。本文主要论述2,5-二取代-1,3,4-噻二唑类化合物的合成及其在抗腐蚀、抗磨擦、液晶、农药、医药、分析化学等方面的应用。