RFA—300型自动分析仪检测总植物碱的改进

对连续流动法测定烟草及烟草制品中总植物碱的各影响因素进行了试验研究,并根据试验结果对仪器管路进行相应的改造。实验结果表明,烟草制品中总植物碱的连续流动法测定,改进后方法的回收收率高、重现性好。     

20位单片音频数模转换器PCM63P

PCM63P是美国BB公司生产的具有超低失真性能(满量程输出最大为-93dB)的精密20位数模转换器，可应用于低失真频率合成、高级消费品和特殊的数字音频应用等方面。文中介绍了PCM63P的工作原理及应用电路。     

邻—(4—乙基苯甲酰基)苯甲酸的研究

本文阐述了通过Friedel-Crafts反应合成邻-(4-乙基苯甲酰基)苯甲酸的方法.研究了影响产物质量的因素,提出了适宜的工艺条件.     

PTA装置压力离心机冲洗新技术

分析了仪征化纤PTA装置压力离心机运转效果不佳的原因,提出解决方案,改造实施后取得了很好的效果。     

Biochemical mechanisms conferring cross-resistance to fumigant toxicities of essential oils in a chlorpyrifos-methyl resistant strain of Oryzaephilus surinamensis L. (Coleoptera: Silvanidae)

The fumigant toxicities of lavender and ylang-ylang essential oils were tested against a chlorpyrifos-methyl resistant strain (QVOS102) and an insecticide-susceptible reference strain (VOS48) of the saw-toothed grain beetle, Oryzaephilus surinamensis L. (Coleoptera: Silvanidae). The resistant strain showed 1.3- and 1.6-fold higher tolerance against lavender and ylang-ylang fumigation toxicity, respectively, relative to the susceptible strain. LT₅₀ values calculated as the time to attain 50% mortality of tested insects during fumigation were determined at two different concentrations. At 15 μl/l of air, QVOS102 had 2.9- and 1.4-fold higher LT₅₀ values for lavender and ylang-ylang fumigation toxicity, respectively, than VOS48. At 200 μl/l air, QVOS102 had 6.4- and 2.9-fold higher LT₅₀ values for lavender and ylang-ylang fumigation toxicity, respectively, than VOS48. Piperonyl butoxide, a potential inhibitor of cytochrome P450-dependent monooxygenase, increased fumigant toxicities of the two essential oils against QVOS102. The enhanced tolerance for the essential oil may have resulted from the enhancement of detoxifying enzymes associated with insecticide resistance.     

心电图信号的频域分析

提出了一种简便有效的、由心电图（ECG）曲线提取QRS-T复合波的新方法，从而获得P波（当房颤未发生时）或f波（当房颤时）；利用功率谱、自相关、互相关等信号处理技术，对它进行了处理和分析，特别是，比较了未房颤时和发生房颤时的相关信息的显著差别。     

CAS-BUS: A Test Access Mechanism and a Toolbox Environment for Core-Based System Chip Testing

As System on a Chip (SoC) testing faces new challenges, some new test architectures must be developed. This paper describes a Test Access Mechanism (TAM) named CAS-BUS that solves some of the new problems the test industry has to deal with. This TAM is scalable, flexible and dynamically reconfigurable. The CAS-BUS architecture is compatible with the IEEE P1500 standard proposal in its current state of development, and is controlled by Boundary Scan features.This basic CAS-BUS architecture has been extended with two independent variants. The first extension has been designed in order to manage SoC made up with both wrapped cores and non wrapped cores with Boundray Scan features. The second deals with a test pin expansion method in order to solve the I/O bandwidth problem. The proposed solution is based on a new compression/decompression mechanism which provides significant results in case of non correlated test patterns processing. This solution avoids TAM performance degradation.These test architectures are based on the CAS-BUS TAM and allow trade-offs to optimize both test time and area overhead. A tool-box environment is provided, in order to automatically generate the needed component to build the chosen SoC test architecture.     

A continuum-based modeling of MEMS devices for estimating their resonant frequencies

A continuum-based modeling of coupled electrostatics-structure interactions is presented for the frequency computations of MEMS devices. The present general formulation of electrostatics accounting for free space is validated first by specializing it to one-dimensional uniform motion of conducting surfaces and comparing the resulting electrostatics to conventional lumped models. The general coupled electrostatics-structure interactions are then applied for the prediction of resonant frequencies of MEMS devices due to bias-voltage changes and temperature variations. Comparisons of predicted resonant frequencies obtained by the present coupled electrostatics-structure interaction models with experimental results available in the literature demonstrate that the proposed continuum-based interaction modeling yields high-confidence predictions of resonant frequencies of MEMS devices.     

AUTOCAM简介及其初步使用的心得

一般来说,新闻直播中镜头是固定的,不需要太多的操作。如今,使用可远程遥控的摄像设备已成为一个热点。本文主要以东方卫视为例,从选型、使用及日常维护等方面,对对AUTOCAM的进行简单介绍。     

Recent advances in isotropic conductive adhesives for electronics packaging applications

Isotropic conductive adhesives (ICAs) have recently received a lot of focus and attention from the researchers in electronics industry as a potential substitute to lead-bearing solders. Numerous studies have shown that ICAs possess many advantages over conventional soldering such as environmental friendliness, finer pitch printing, lower temperature processing and more flexible and simpler processing. However, complete replacement of soldering by ICAs is yet not possible owing to several limitations of ICAs which are mainly related to reliability aspects like limited impact resistance, unstable contact resistance, low adhesion and conductivity etc. Continued efforts for last 15 years have resulted in development of ICAs with improved properties. This review article is aimed at providing a better understanding of ICAs, their principles, performance and significant research and development work addressing the technological utility of ICAs.