Synthesis and characterization of zeolite NaY from rice husk silica

Rice husk silica (RHS) in amorphous phase with 98% purity was prepared from a waste rice husk from rice milling by leaching with hydrochloric acid and calcination. The RHS was used effectively as a silica source for the synthesis of zeolite Y in sodium form (NaY). The zeolite in pure phase was obtained from a two-step synthetic route in which the starting gels were mixed, aged for 24 h at room temperature and crystallized for 24 h at 90 °C. The diameter of single crystal particles from a scanning electron microscope was approximately 1.0 μm, whereas the average particle diameter from laser diffraction particle size analyzer was approximately 10 μm because of the agglomeration of small crystals. Longer crystallization time in this route resulted in a mixed phase containing NaY and zeolite P in sodium form (NaP). In addition, a one-step synthetic route (no aging) was studied and the product was also a mixed phase zeolite.     

Mesh结构P/G布线网络层次化快速分析方法

本文提出了一个基于网络划分的P／G布线网络层次化快速分析方法。其中，对于子网运算，通过对Cholesky分解法三角化对称正定阵的图模型分析，并基于Mesh结构网络的自身特点，提出了一个基于图顶点排序的加速子网分析运算策略；并用基于MPI的并行结构实现了P／G布线网络分析的并行运算。     

内容寻址网络中内容的有效定位

P2P(Peer—to—Peer)的最基本的问题是如何高效地查找到存放文件的节点。本文提出在保持内容寻址网络(Content Addressable Network：CAN)现有特性的基础上建立一种更快捷有效的内容定位结构：基于快捷链接和最小距离的内容定位。本文首先介绍了内容寻址网络的基本工作原理，然后详细描述了基于快捷链接和最小距离进行内容定位的方法，并通过仿真证实了该方法很大程度上改善了CAN的性能。     

Mesh-Tree两级层次结构P/G网布线优化方法

本文采用Mesh-Tree两级层次结构作为P／G网布线拓扑结构，并提出了一个对于该结构的线宽优化方法，使超大型P／G网的布线优化速度大大提高。     

BPxN1-x薄膜的制备及磷元素对其光学能隙的影响

本文从应用出发，选择光学石英为衬底，采用热丝辅助射频化学气相沉积的方法沉积BPxN1—x薄膜，对样品进行了X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外—可见等测试。XRD、SEM结果显示薄膜多晶态，表面形貌随时间变化，最终为胞状；紫外—可见光光谱结果显示BPxN1—x薄膜的紫外吸收边随沉积时间的加长、PH3流量的增加而向长波长方向移动。因此，该材料的光学能隙可以通过生长工艺适当调整。另外，BPxN1—x薄膜与液晶层能较好匹配等特性更使其适用于紫外空间光调制器。     

粉末材料中微夹杂缺陷的超声波检验

介绍了用超声波方法检测微夹杂缺陷的一些试验结果，比较了不同频率、不同试验方法检测能力的差异，并通过解剖试验对检出缺陷的性质、尺寸作了比较。     

压电复合材料PT－P（VDF／TeFE）的静水压压电性

用热轧辊机制备了压电复合材料ＰＴ－Ｐ（ＶＤＦ／ＴｅＦＥ），并利用ＬＣＲ电桥和Ｂｅｒｌｉｎｃｏｕｒｔ电路分别测量了其介电常数和压电常数，实验结果表明它具有良好的静水压压电特性。最后讨论了该复合材料在水听器中的应用     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry     

化学复合镀Ni-P-TiO_2光催化降解次甲基蓝

以钛酸丁酯为原料通过溶胶 凝胶法制备出粒径 30nm左右的纳米TiO2 ,利用化学复合镀在钢铁基底上形成Ni P 纳米TiO2 复合镀层 ,该复合镀层对次甲基蓝有较好的光催化降解作用 ,其催化性能与粉末状纳米TiO2 的催化性能大致相当。     

Kinetic Monte Carlo simulations of radiation induced segregation and precipitation

Kinetics of radiation induced segregation and precipitation in binary alloys are studied by Monte Carlo simulations. The simulations are based on a simple atomic model of diffusion under electron irradiation, which takes into account the creation of point defects, the recombination of close vacancy-interstitial pairs and the point defect annihilation at sinks. They can reproduce the coupling between point defect fluxes towards sinks and atomic fluxes, which controls the segregation tendency. In pure metals and ideal solid solutions, the Monte Carlo results are found to be in very good agreement with classical models based on rate equations. In alloys with an unmixing tendency, we show how the interaction between the point defect distribution, the solute segregation and the precipitation driving force can generate complex microstructural evolutions, which depend on the very details of atomic-scale diffusion properties.