Magnetic resonance imaging of H, Na, and Cl penetration in Portland cement mortar

The first magnetic resonance imaging profiles of chloride content in low- and high-permeability Portland cement mortar have been obtained using a novel material science imaging technique. The penetration of water as well as chloride and sodium ions, into mortar specimens was monitored for a period of 72 h. Marked differences in penetration depth were observed in low- and high-permeability mortar. These preliminary experiments show significant differences between the extent and nature in the penetration of chlorides compared to water and sodium.     

微合金化高强度钢轧制采用的工艺技术

本文综述微合金化高强度钢轧制采用的工艺技术，其中包括热装热送、板坯加热、控轧控冷、快速冷却、采用的新设备等工艺技术。重点是生产低碳、高韧性、高强度、易焊接的造船用钢采用形变热处理技术，以提高产量和质量，节省昂贵的Ｎｉ、Ｃｒ、Ｍｏ等合金，降低生产成本。     

箱体零件CAD／CAPP／CAM集成系统的研究与实践

在ＣＩＭＳ环境下，针对箱体零件ＣＡＤ、ＣＡＰＰ、ＣＡＭ信息集成的功能需求，在基于特征的箱体零件信息模型、工艺计划模型与服务于工艺设计的制造环境模型的支持下，开发出了特征造型，工艺设计及加工过程仿真与ＮＣ编程等子系统，从而完成了一个集成化的箱体零件ＣＡＤ／ＣＡＰＰ／ＣＡＭ系统。     

上海发展电炉短流程生产工艺的若干问题及对策

通过对电炉短流程生产工艺的发展及其特点的分析，探讨了上海冶金工业发展短流程生产工艺可能出现的若干问题及对策。     

Energy parameters of a solar car for Jordan

All parameters related to car energy were investigated in this work, and the power basics of a car design powered by solar energy are laid down. Year-round weather conditions, car weight, road roughness and road inclination were taken as variable parameters used to calculate the car speed and working hours (year round). Fixed parameters taken for the design were: a photovoltaic generator area of 6 m², car length of 5 m, car width of 1.8 m and maximum power output of 480 W/person with a maximum of two persons. These parameters depended on the regulations of “Tour de Sol '91”. Calculations depended on Amman weather conditions. Sixteen ASI 16-200 ARCO SOLAR INC. model photovoltaic modules were used, with three DELCO 1150 lead acid batteries connected to a permanent magnet DC motor of 0.8 hp. This car can run at different speeds 3–6 hours/day on 200 days/year.     

宝钢3号高炉计算机系统的RAS性能设计

在宝钢３号高炉计算机系统的开发过程中十分注意系统ＲＡＳ性能设计。本文介绍了３号高炉计算机系统设计中，为提高系统的ＲＡＳ性能所采取的各种对策。     

半连续式棒材轧机在线捆扎机及其工艺设置

由北京冶金设备制造厂设计的YSK6型钢丝捆扎机，共设有并列6台棒材捆扎车，每台捆扎车由中间收送机、成形捆扎机、液压装置、捆扎辊道和台车组合而成。按生产工艺参数要求，整个成型捆扎周期为30秒。捆扎后的棒材在成品称重时用电子秤，每称量一次均可打印出单次净值、累加值和累加次数值。     

一种新型硫酸亚铁单液法调剖剂

本文提出用尿素作为ｐⅡ调节剂，加快硫酸亚铁单液法调剖剂中亚铁离子在地层温度下的沉淀，增大沉淀率，提高封堵效能。岩芯流动试验结果表明，１５％ＦｅＳＯ４．７ＩＩ ２Ｏ／５％尿素调剖剂体系的封堵能力比不含尿素的体系增大近一倍。     

反应结合氧化铝陶瓷制备新工艺

本文评述了反应结合氧化铝陶瓷的制备工艺原理，配料组成，研磨与原料细度，成形压力和升温速率等对陶瓷性能的影响。介绍了几种反应结合氧化铝陶瓷制造实例。     

会议电视系统及其发展现状

讨论会议电视系统的组成，种类及设计标准，介绍其发展现状及应用中存在的问题。