富集纯化三七皂甙Rb_3方法的研究

研究了丙酮直接结晶法,正丁醇萃取法,HPD-100型药用大孔吸附树脂对三七皂甙Rb3的精制作用,并对它们的效果及可行性进行比较,主要从上样量,纯化效果进行优化,确定了用大孔吸附树脂是工业上的最佳条件。     

一株Triton X⁃100降解菌的分离鉴定及降解条件优化

从某化工厂污水处理车间好氧曝气池的活性污泥中,筛选了一株对非离子表面活性剂Triton X?100具有降解能力的菌株ISB5。对菌株的16S rDNA进行测序和比对分析,将菌株ISB5鉴定为假单胞菌属（Pseudomonas sp.）。进一步对菌株ISB5降解Triton X?100的培养条件进行考察,得到了菌株的适宜降解条件：培养温度为30 ℃,Triton X?100的初始质量浓度为4 g/L,培养时间为28 h,振荡速率为150 r/min,装液量为100.00 mL,接种量为1.00%（菌株ISB5与培养基的体积比）。在该条件下,TritonX?100的降解率可达93.0%以上。     

Effect of Ionic Liquids on Surface and Aggregation Properties of Non-ionic Surfactant Triton™ X-100 in Aqueous Media

The effect of the hydrophilic ionic liquids (ILs) 1-butyl-2,3-dimethylimidazolium bromide [bdmim][Br] and 1-hexyl-2,3-dimethylimidazolium bromide [hdmim][Br] on the aggregation and surface active behaviour of the non-ionic surfactant Triton? X-100 (TX-100) was studied in aqueous media. Several aggregation properties of TX-100 + IL/water systems, such as critical micelle concentration (CMC), surface active parameters, aggregation number (N _agg) and aggregate size, were determined by surface tension, fluorescence and dynamic light scattering (DLS) techniques. It was found that the average micellar size and aggregation number decrease, whereas the CMC increases with increasing concentration of ILs. Interestingly, the CMC value of TX-100 is reduced slightly below 0.5 wt% of both the ILs in the medium. At higher wt% of IL in the system the CMC increases. It was demonstrated that ILs [bdmim][Br] and [hdmim][Br] can be judiciously used at different wt% for modifying the physico-chemical properties of TX-100.     

Test/retest and inter‐test agreement of color aptitude measures

The color discrimination capacity of color vision normal observers can be assessed using color aptitude tests (CATs), although data on the test/retest reliability and inter‐test agreement of such tests using appropriate statistical measures is limited. In this study, 32 color vision normal observers twice performed each of five CATs, being the Farnsworth‐Munsell 100 hue test, HVC Color Vision Skills Test, inter‐Society Color Council Color Aptitude Test, the Nagel Anomaloscope (Nagel), and a custom designed two‐color discrimination test. Two methods of determining the Nagel matching range were used based on the initially accepted matching range or on repeated measures. The test/retest performance of each test was determined using the method outlined by Bland and Altman[Lancet 1986;1:307–310] and the inter‐test agreement was analyzed using the same method, after converting test scores into z score units. No test was found to have a significant systematic alteration in test performance between test and retest. Test/retest performance was generally poor, indicating that tests can only reliably classify observers into very broad performance bands. All tests failed to show inter‐test agreement, and our data indicate a primary reason for this: as test/retest performance is generally poor, inter‐test agreement must also be poor as no test can agree more with another test than it agrees with itself. © 2014 Wiley Periodicals, Inc. Col Res Appl, 40, 224–231, 2015     

Use of micellar extraction and cloud point preconcentration for valorization of saponins from sisal (Agave sisalana) waste

Sisal (Agave sisalana) is the main hard fiber produced worldwide, with an estimated generation of 400 thousands t in 2011. From its leaves, only the hard fibers, which represent 3–5% of their weight, are removed. The remaining 95–97% is referred to as sisal waste and contains steroidal saponins that can be potentially used in foods, cosmetics and pharmaceuticals formulations, as well as for soil bioremediation. The present work aimed at to evaluate strategies for the extraction and concentration of saponins from sisal waste, focused on the use of clean solvents, such as water and ethanol. For this purpose, it was firstly performed a central composite rotatable design for the optimization of the extraction conditions followed by a comparison of this strategy with other methods (Soxhlet, ultrasound-assisted extraction and micellar extraction). Cloud point preconcentration was then tested, using several types and concentrations of salts. The use of orbital shaker extraction (200 rpm) with an ethanolic solution (30%, v/v) at 50 °C, a mass/volume ratio sisal/solvent of 0.17 (g/mL) for 4 h allowed a recovery of 38.6% of the saponins. When a micellar extraction strategy using 7.5% (v/v) of Triton X-100, under the above-mentioned conditions was performed, saponins recovery raised to 98.4%. In a subsequent step, the addition of 20% (m/v) sodium carbonate led to a preconcentration factor of 20.3. The best adsorbent for Triton removal from the preconcentrated solution was Amberlite FPX-66. The process strategy proposed in the present study showed to be efficient for saponins extraction and preconcentration from a low-cost, highly available agricultural waste.     

X-射线荧光仪熔片法测定石灰石中各组分

本文介绍了一种用X荧光熔片法测定石灰石中各组分的快速分析方法。用国家级石灰石标样绘制工作曲线,消除基体效应及吸收增强效应,分析速度快,操作简单,对快速冶炼起到了很好的指导作用。     

Interfacial Chemistry of Langmuir-Blodgett Deposited Polyimide Films on Si (100)

Using the Langmuir-Blodgett (LB) technique, ultrathin films of the octadecylammonium salt of polyamic acid (PACS) on (100) oriented silicon wafers with one, three and five monolayers were prepared. The imidization of the films was investigated with x-ray photoelectron spectroscopy (XPS) during a stepwise heating procedure in vacuum. Significant differences in the XPS spectra indicate an incomplete polymerization of the films as a function of film thickness. It is believed that the chemical interaction at the interface between Si substrate and PACS is responsible for the incomplete polymerization of the LB film in direct contact with the substrate. From ellipsometric measurements the absolute thickness of a PACS and a polyimide layer has been determined to be 1.7 nm and 0.6nm, respectively. These measurements allow us to determine the electron mean free path for the Si2p electrons (E_k=1153 eV) of λ = 4.2±0.1 nm through these films.     

HDPE-g-MAH和POE-g-MAH对HDPE/PA6共混物性能的影响

分别以高密度聚乙烯接枝马来酸酐（HDPE-g-MAH）和乙烯-辛烯共聚物接枝马来酸酐（POE-g-MAH）作为相容剂,通过熔融挤出法对PE100/PA6共混物进行共混改性。研究了两种相容剂的用量对共混物力学性能、热性能和微观结构的影响。结果表明：HDPE-g-MAH与POE-g-MAH相比,都使体系发生反应性增容的同时,对共混物的结晶性更为有利,使得PE100/PA6/HDPE-g-MAH的综合性能更好,更适合作为PE100耐热改性时的增容剂。     

Production of a halotolerant lipase from Halomonas sp. strain C2SS100: Optimization by response-surface methodology and application in detergent formulations

The aim of this work was to optimize the production of a new lipase by a halotolerant bacterial strain Halomonas sp. C2SS100, by means of the response-surface methodology (RSM). The process parameters having the most significant effect on lipase production were identified using the Plackett–Burman screening design-of-experiments. Then, Box–Behnken design was applied to optimize lipase activity and the quadratic regression model of the lipase production was built. Indeed, the lipase yield was increased, and the value obtained experimentally (39 ± 2 U/ml) was very close to the rate predicted by the model (40.3 U/ml). Likewise, optimization of parameters by RSM resulted in 2.78-fold increase in lipase activity. These findings provide the first report on lipase production and optimization by a halotolerant bacterial strain belonging to Halomonas genus. Afterward, the biochemical properties of the produced lipase were studied for apply in oil stains removal. The crude lipase showed a maximum activity at 60°C and at pH ranging from 7 to 10. It displayed an important stability at high temperature, pH, and NaCl. Interestingly, this bacterial lipase exhibited a prominent stability toward some commercial solid and liquid detergents after 30 min of incubation at 50°C. The capability of the crude lipase to eliminate stain was ascertained on polycotton fabric pieces stained with lubricating oil. Whether with the addition of hot water alone or of a commercially available detergent, lipase is able to considerably boost the elimination of oil stains. The actual findings highlight the capacity of Halomonas sp. lipase for energy-efficient biocatalytic application.     

Interferon-β Activity Is Affected by S100B Protein

Interferon-β (IFN-β) is a pleiotropic cytokine secreted in response to various pathological conditions and is clinically used for therapy of multiple sclerosis. Its application for treatment of cancer, infections and pulmonary diseases is limited by incomplete understanding of regulatory mechanisms of its functioning. Recently, we reported that IFN-β activity is affected by interactions with S100A1, S100A4, S100A6, and S100P proteins, which are members of the S100 protein family of multifunctional Ca²⁺-binding proteins possessing cytokine-like activities (Int J Mol Sci. 2020;21(24):9473). Here we show that IFN-β interacts with one more representative of the S100 protein family, the S100B protein, involved in numerous oncological and neurological diseases. The use of chemical crosslinking, intrinsic fluorescence, and surface plasmon resonance spectroscopy revealed IFN-β binding to Ca²⁺-loaded dimeric and monomeric forms of the S100B protein. Calcium depletion blocks the S100B–IFN-β interaction. S100B monomerization increases its affinity to IFN-β by 2.7 orders of magnitude (equilibrium dissociation constant of the complex reaches 47 pM). Crystal violet assay demonstrated that combined application of IFN-β and S100B (5–25 nM) eliminates their inhibitory effects on MCF-7 cell viability. Bioinformatics analysis showed that the direct modulation of IFN-β activity by the S100B protein described here could be relevant to progression of multiple oncological and neurological diseases.