浸入凝胶法聚合物膜形成机理的研究现状

从热力学、传质动力学、相分离机制和固化过程几方面综述了浸入凝胶过程中聚合物膜形成机理的研究现状 .指出浸入凝胶成膜过程是传质交换和由传质交换引发的相分离以及其后的固化过程之间相互竞争的复杂非平衡过程 ,膜结构是上述几个过程竞争的结果     

二次盐水及离子膜电解工序常见问题简析

介绍了二次盐水及离子膜电解工序的主要设备和流程,对二次盐水及离子膜电解工序运行中出现的问题进行了分析,并提出了解决措施。     

动态陶瓷微滤膜净化沐浴污水实用研究

利用自制的动态陶瓷微滤膜对沐浴污水进行了处理,根据处理水质指标及膜操作参数的比较,发现在0.15MPa以下时,膜通量随压力的升高明显增加,大于0.15MPa时,压力对膜通量的影响不明显。合适的操作压力是0.1～0.15MPa,稳定通量为90～110L/m2·h。不同压力出水CODCr去除率达87%～98%、浊度从120°降到3°以下,处理后颜色为无色。并根据实验结果进行了工程化工艺初步设计和经济分析。     

Prediction of spectral reflectance factor distribution of automotive paint finishes

It is necessary to determine the accurate reflectance of painted surfaces for the review of paint finishes by computer graphics (CG) before actual painting of the exterior color of automobiles, and for quality control during production and inspection processes. We have optimized a method for measuring reflectance by using a statistical technique. We have found that the reflectance of a painted surface is best measured at an incident angle of 60° and at five aspecular angles of 10°, 18°, 28°, 40°, and 90°. Our method makes it possible to accurately reproduce reflection characteristics of paint finishes containing special flake pigments, such as pearl mica. Also it was proved that our method can apply not only to solid and metallic coatings but to all painted surfaces. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 275–282, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20125     

膜分离法回收合成氨弛放气中氢气

介绍了膜分离的原理和应用。实践表明该方法具有效率高、流程简单、操作灵活容易、纯度高和收率高等优点。     

An integrated modelling environment for the embodiment of mechanical systems

The efficient, economical and often elegant transformation from a design schema to an embodied design solution containing real components is essential for the commercial success of a product. More often the ability of the designer to explore an optimum solution is severely frustrated by the analytically intensive and time-consuming aspects of embodying a concept. This paper presents a computer based system-modelling tool that is to be used by designers during the transformation of a concept to an embodied solution particularly to deal with standard components. This environment provides for the representation of conceptual schemas and subsequent embodiment from computer based component selection modules. These selection modules encompass the full range of electronic representations for standard mechanical components. The strategy for representing a mechanical system, its included components and their associated representations is discussed. The process of constructing a system model, specifying the desired performance characteristics and system resolution are also described.     

Transport of chromium(VI) through a Cyanex 921‐supported liquid membrane from HCl solutions

The transport of chromium(VI) through a flat‐sheet supported liquid membrane containing Cyanex 921 as a carrier has been investigated. The permeation of the metal is investigated as a function of various experimental variables: hydrodynamic conditions, concentration of chromium(VI) and HCl in the feed phase, carrier concentration and diluent in the membrane and strippant concentration in the stripping phase. The mass transfer coefficient and the thickness of the aqueous boundary layer were calculated from the experimental data. Furthermore, the selectivity of Cyanex 921‐based flat‐sheet supported liquid membrane towards different metal ions and the behaviour of the system against other carriers are presented. Copyright © 2003 Society of Chemical Industry     

乙基叔丁基醚/β分子筛膜反应精馏

研究了混合碳四和乙醇合成乙基叔丁基醚(ETBE)的反应精馏过程。实验以支撑β分子筛膜为催化精馏元件，异丁烯转化率高达95％，回流比和醇烯摩尔比是影响异丁烯转化率的主要因素。与甲基叔丁基醚(MTBE)的反应精馏过程相比，以乙醇取代甲醇，只需对MTBE生产的操作条件作一些简单的调整，就可在其生产装置上合成ETBE。     

Membrane Packaging System to Permit Safe Hydration of Freeze-Dried Contents with Impure Water

We tested the feasibility of using polymer membranes for a self-hydrating packaging system to reconstitute freeze-dried foods using nonpurified water. Several commercial membranes were screened according to (1) hydration rate, (2) water permeability, (3) passage of microorganisms, (4) salt rejection, and (5) strength. The most promising membranes were used for developing and testing prototype packaging systems. A feasible self-contained rehydration system was a nylon-6 polyamide membrane that rehydrated the freeze-dried food within 30 min while passage of microorganisms was prevented. The temperature was 37°C, and the food contained 0.5g/5g of a low molecular weight solute (salt). Such self-contained membrane rehydration systems must be designed to accommodate expected environmental conditions such as temperature, relative humidity, and nature of the product.     

Crossflow microfiltration of gum arabic solutions: Comparison of the classical system with the co-current permeate flow system

Gum arabic is a natural gum exuded mainly by the trees Acacia senegal , currently used in the food industries for its emulsifying, thickening and stabilizing properties. Its present processing includes various operations providing a quite turbid product. Crossflow microfiltration could be interesting for the clarification and the cold-pasteurization of the gum arabic solutions. Several experiments were therefore made with the crossflow microfiltration unit at ENSIA, using two different systems: the classical one (without permeate circulation), and the co-current permeate flow system (CCPF) allowing the exploration of the low transmembrane pressures range. With gum arabic solutions of 0.17g solids g⁻¹ solution and 70°C, the best results after 60 min of filtration (105.7 L h⁻¹ m⁻², 4.4% of solids retention and 83.4% of clarification) were obtained with the CCPF system at low transmembrane pressure and high crossflow velocity (0.3 bar and 7.5ms⁻¹).