Synthesis and kinetic studies of UV‐curable urethane‐acrylates

The UV‐curable urethane‐acrylates based on 2‐hydroxyethyl methacrylate (HEMA)‐terminated polyurethane (PU) for lithographic and coating applications are investigated in this study. Series of PU prepolymers were made from 4,4‐diphenyl methane diisocyanate (MDI), poly(propylene oxide) glycol (PPG 400), poly(butylene adipate)glycol (PBA 500), or poly(tetramethylene oxide) glycol (PTMO 1000) and are terminated with HEMA. The 2,2‐azobisisobutyronitrile (AIBN) was used as a UV‐initiator under air atmosphere. The curing kinetics of HEMA‐terminated PU film were studied. The curing analysis, using FTIR and reaction kinetics, indicate the reaction rate equation correlates well with the film thickness [T], initiator concentration [I], unreacted double bond concentration [C?C], and exposed energy [E] of the reaction system. The kinetic rate equation for the UV‐curable reaction can be written as © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3162–3166, 2004     

水性UV图案化功能涂膜技术研究

研究了一种新型水性UV涂料制备技术,可得到用传统方法无法获得的图案化涂膜。利用扫描电镜、DSC、凝胶渗透色谱等对该图案化聚合物进行分析表征;考察了不同功能添加剂对涂膜形貌的影响;并讨论了光照时间、光引发剂用量与聚合物相对分子质量间的关系。     

Ozone-Based Advanced Oxidation Processes for the Decomposition of N-Methyl-2-Pyrolidone in Aqueous Medium

The present study investigates the decomposition of N-Methyl-2-Pyrolidone (NMP) using conventional ozonation (O₃), ozonation in the presence of UV light (UV/O₃), hydrogen peroxide (O₃/H₂O₂), and UV/H₂O₂ processes under various experimental conditions. The influence of solution pH, ozone gas flow dosage, and H₂O₂ dosage on the degradation of NMP was studied. All ozone-based advanced oxidation processes (AOPs) were efficient in alkaline medium, whereas the UV/H₂O₂ process was efficient in acidic medium. Increasing ozone gas flow dosage would accelerate the degradation of NMP up to certain level beyond which no positive effect was observed in ozonation as well as UV light enhanced ozonation processes. Hydrogen peroxide dosage strongly influenced the degradation of NMP and a hydrogen peroxide dosage of 0.75 g/L and 0.5 g/L was found to be the optimum dosage in UV/H₂O₂ and O₃/H₂O₂ processes, respectively. The UV/O₃ process was most efficient in TOC removal. Overall it can be concluded that ozonation and ozone-based AOPs are promising processes for an efficient removal of NMP in wastewater.     

积层多层板用UV油墨的合成研究

采用丙烯酸改性环氧树脂E－44的方法，合成了环氧丙烯酸酯预聚物，并将其用在UV光固化油墨的配方中。在树脂合成过程中，研究了反应温度，催化剂，阻聚剂等因素对合 产品的影响。通过L9(3^4)正交试验，得到了优化的工艺参数：反应温度为90℃，催化剂为N，N－二甲苯胺，用量1％；阻聚剂对苯二酚，用量0．5％，投料环氧树脂和丙烯酸的摩尔比为1：1．08。     

The Chemistry of Water Treatment Processes Involving Ozone,Hydrogen Peroxide and Ultraviolet Radiation

Advanced oxidation processes are defined as those which involve the generation of hydroxyl radicals in sufficient quantity to affect water purification. The theoretical and (practical yield of OH from O₃ at high pH, 0₃/H₂0₂, O₃/UV and H₂O₂/UV systems is reviewed. New data is presented which illustrates the importance of direct photolysis in the O₃/UV process, the effect of the H₂0₂:0₃ ratio in the O₃/H₂O₂ process, and the impact of the low extinction coefficient of H₂O₂ in the H₂0₂/UV process.     

Photostabilization of cationic UV-cured coatings in the presence of nanoTiO2

The effect of TiO₂ nanoparticles for sun-weathering protection of UV-cured coatings is investigated. TiO₂ is either introduced in the form of nanoparticles in the photocurable formulations or generated in situ via sol–gel process. Cured films containing comparable amounts of TiO₂ were weathered for 800 h under UV irradiation and compared with free-TiO₂ coating. The TiO₂ presence induces a clear lower mass loss decrease during weathering as well as a lower gel content decrease. The TiO₂ screen effect is also confirmed by a lower alkyl-band reduction monitored by FT-IR during weathering. The TiO₂ generated in situ via sol–gel gives rise to transparent coatings without interfering with photopolymerization process and therefore without compromising UV-cured film properties.     

Photocatalytic decoloration of water-soluble azo dyes by reduction based on bisulfite-mediated borohydride

Investigation of the photocatalytic decoloration of nine water-soluble anionic azo dyes widely used for the coloration of textiles was conducted in a photoreactor by a selected reduction based on bisulfite-mediated borohydride. The influence of the irradiation power on their decoloration was discussed in this work. The decoloration processes of two typical azo dyes, Reactive Red MS and C.I. Direct Blue 15 were examined with UV–vis measurement and their decoloration kinetics was also investigated. Moreover, identification of benzidine compounds released from the photoreduction of four direct dyestuffs was undertaken. The results indicated that the reduction of the dyes was significantly enhanced under the increasing irradiation. It was found that the overall degradation followed pseudo-first-order kinetics and two distinct stages were observed in the decoloration processes of Reactive Red MS and C.I. Direct Blue 15. The decay rates at first stage were slightly changed, but the decay rates at second stage were significantly affected by the light intensity. In addition, UV–vis spectra showed that the azo linkages in molecule structure of the dyes were destroyed during the decoloration. Finally, dimethoxyl benzidine or benzidine produced from the photoreduction of four direct dyes was identified as the decoloration products through a rapid spectrophotometric method.     

紫外/臭氧复合杀灭水中细菌性能研究

为开发一种高效灭菌方法,研究了UV/O3的复合灭菌性能,对紫外辐射、臭氧和羟基自由基等在体系中的各自作用进行探讨,同时考察pH值、温度等对灭菌效果的影响.结果表明,UV/O3较单独紫外或臭氧灭菌时效果有所提高,在初始臭氧质量浓度为5.02mg·L-1,液面紫外辐射强度为6.5mW·cm-2,灭菌时间1.5～9.0s时,UV/O3对细菌总数灭菌率达3.6～6.4,单独紫外时为1.8～4.7,单独臭氧时仅为1.6～3.0.羟基自由基的产生是复合灭菌效果增加的主要原因.随紫外辐射强度和臭氧投加量的增加,复合灭菌作用得到提高.pH值在5.5～8.5变化时,UV/O3灭菌效果随原水pH值的增加略有提高.温度由10℃上升到27℃时,灭菌效果稍有下降.由此可见,UV/O3是一种高效可行的水体灭菌技术。     

日盲区紫外光非视线传输模型

为建立一个更接近实际情况的紫外光非视线传输模型,用来处理复杂的大气条件和边界条件,建立了基于Monte Carlo方法的紫外光非视线传输快速算法模型。分析了发射功率为1 W的单色紫外光信号在不同环境条件下的脉冲响应函数和边界条件对信号强度空间分布的影响,以及系统发射仰角和接收仰角与探测信号强度的关系。与单次散射模型比较,该模型具有更高的精度和边界处理能力。对合理涉及通信系统、提高通信质量都有很大提高。     

Synthesis of nanodispersed oxides of vanadium, titanium, molybdenum, and tungsten on mesoporous silica using atomic layer deposition

The advantages of the atomic layer deposition (ALD) method for preparation of tungsten, vanadium, titanium, and molybdenum oxide catalyst supported on mesoporous silica are discussed, with emphasis on the importance of synthesis conditions on dispersion, structure and activity of the resulting materials. A suite of complementary techniques such as DRS-UV/Vis, BET, ¹H-NMR, XRD, and TEM were used to study the structural properties of the supported metal oxides, and probe reactions such as 2-butanol dehydration and ethanol partial oxidation were used to demonstrate the potential advantages of the ALD-prepared catalysts. Specifically, highly dispersed oxides of titanium, molybdenum, and tungsten oxide on mesoporous silica were synthesized using the ALD method. It is also demonstrated that attainment of high dispersions of vanadium oxide on mesoporous silica requires the presence of at least a single layer of titanium oxide due to the well-known poor interaction between vanadia and silica. The highly dispersed catalysts prepared here by ALD methods exhibited superior catalytic performance relative to those prepared using conventional incipient wetness impregnation.