Internal fracture of notched epoxy resins

The brittle fracture of round-notched epoxy resin bars subjected to plane strain bending has been studied at varying strain rates. Observations of fracture processes and surface morphologies revealed that the internal crack was nucleated at the plastic-elastic boundary when the plastic deformation zone at the notch root reached a certain size. A slip-line field theory allows calculation of the stress components at the plastic-elastic boundary from a knowledge of the location of the internal crack. An analysis of the data concluded that the triaxial stress level ahead of the plastic zone was raised by plastic constraints to an ideal fracture stress which is considerably larger than that of glassy thermoplastics.     

Preparation and thermomechanical characterization of poly(vinyl chloride) blends compatible with terpolymer‐containing maleic anhydride

In this study, I aimed to change the thermomechanical characteristics of poly(vinyl chloride) (PVC), which is widely used in commercial areas. Copolymers containing maleic anhydride (MA) units are commonly used to obtain compatible polymer blends. In our study, PVC blends were also prepared with the terpolymers with and without anhydride units. I assumed that the impact of the terpolymer on the thermomechanical characteristics of the PVC material could be more effectively controlled. For this purpose, two sets of six different blends of PVC with or without MA were synthesized, among which one was pure PVC, but the other five blends contained 2, 4, 6, 8, and 10% terpolymer. In conclusion, I observed that the terpolymer with the MA unit more regularly changed the thermomechanical characteristics of PVC. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1586–1589, 2004     

球窝型动态混合器结构和机理的研究

介绍研制的题示混合器结构及其混合机理。在分析球窝流场各节点速度分布的基础上,用加权平均总应变和分流混合度作为评定指标,对球窝型混合器的混合行为进行分析。通过对比实验证明球窝型混合器对于高粘流体具有良好的混合功效。     

弹性介质中框架结构的有限元计算分析(英文)

文章提出了一种考虑剪切变形,由经典弯杆理论发展形成的在弹性介质中框架结构的有限元计算方法.     

Similarity model tests of movement and deformation of coal-rock mass below stopes

For a study of the movement and deformation of coal-rock mass and low protected seams below a stope,as well as for fracture developments and rules of evolution of permeability,we designed a plane strain model test stand to carry out model tests of similar materials in order to improve the effect of gas drainage from low protected seams and to measure the movement and deformation of coal-rock mass using a method of non-contact close-range photogrammetry.Our results show that 1) using paraffin melting to take the place of coal seam mining can satisfy the mining conditions of a protective seam;2) coal-rock mass under goafs has an upward movement after the protective seam has been mined,causing floor heaving;3) low protected seams become swollen and deformed,providing a good pressure-relief effect and causing the coal-rock mass under both sides of coal pillars to become deformed by compression and 4) the evolution of permeability of low protected seams follows the way of initial values→a slight decrease→a great increase→stability→final decrease.Simultaneously,the coefficient of air permeability increased at a decreasing rate with an increase in interlayer spacing.     

Hydrogen-induced cracking behaviors of Incoloy alloy 825

The effect of hydrogen on the fracture behaviors of Incoloy alloy 825 was investigated by means of slow strain rate testing (SSRT).Hydrogen was introduced into the sample by electrochemical charging.The results show that surface microcracks form gradually during aging at room temperature when desorption of hydrogen takes place after hydrogen charging at a current density of 5 mA/cm 2 for 24 h.SSRT shows that the increase of ductility loss is significantly obvious as the hydrogen charging current density inc...     

Numerical simulation study on the influence of the ground stress field on the stability of roadways

We adopt the concept of generalized plane strain to model a roadway in a stress field.This can avoid limitations caused by simplifying the stress analysis as plane strain.FLAC3D was used to investigate the maximum tensile stress and displacement of a roadway in a known stress field for angles,α,between the roadway axial direction and the maximum principal stress of 0°,30°,45°,60° and 90°.This theory was applied to the analysis of an engineering case.The results indicate that stress and displacement of the surrounding rock increase as the angle,α,increases.This provides some significant guidance for a reasonable layout of roadways in a known stress field.     

单光纤光栅对温度与应变的同步测量

提出了一种采用单光纤布拉格光栅(FBG)进行温度与应变同步测量的新颖设计。一根FBG被分成等长的两部分,用环氧胶水涂敷在其中一部分的表面,再套上金属套管,此时可以看成具有不同的布拉格波长的2个FBG,利用它们之间不同的杨氏模量和热膨胀系数,应变和温度能够同步测量。实验结果表明,在2700με和75℃的测量范围内,可以达到约6.1με和1.0℃的应变和温度精确度,误差主要来源于光谱仪分辨率的限制和FBG其中一部分的胶水涂抹不够均匀,通过使用高分辨率的解调仪和提高胶水涂抹工艺可得到更高的测量精确度。     

核电饼类锻件制坯过程鐓粗工艺的有限元分析

利用DEFORM软件,对核电锻件制坯过程中的平板鐓粗工艺进行了有限元模拟。分析了在鐓粗过程中,随着压下量的增加,毛坯难变形区的变化;给出了在变形过程中,不同压下量下毛坯内部的变形过程及应力、应变分布情况。通过有限元分析,对解决核电饼类锻件常出现的裂纹和超声波探伤超标等质量问题,提供了有益的参考。