Physicochemical and sensory characteristics of soya protein isolate hydrolysates with added substrate‐like amino acids

Soya protein isolate (SPI) with or without added substrate‐like amino acid was subject to enzymatic hydrolysis catalysed by commercial proteases (Alcalase 2.4 L, flavourzyme and pancreatin). Addition of a small amount of amino acids (amino acid: SPI = 1: 2500, mol g^?1) during hydrolysis would cause a significantly (P < 0.05) reduced protein recovery, increased degree of hydrolysis, and altered amino acid composition and antioxidant activities of SPI hydrolysates. The SPI hydrolysates prepared with added Asp, Arg or Lys exhibited a higher antioxidant activity than the control. The bitterness of SPI hydrolysates was largely reduced upon addition of Met, Asp or Glu during hydrolysis, whilst the umami taste and mouthfeel‐liking were remarkably increased. Therefore, adding amino acid during hydrolysis is a feasible and beneficial approach to improve both the functional and sensory properties of SPI hydrolysate.     

Cu-doped GdFeO3 perovskites as electrocatalysts for the oxygen evolution reaction in alkaline media

Development of electrocatalysts for the oxygen evolution reaction (OER) plays a critical role in electrochemical water splitting systems. In this aim, iron based perovskite oxides with composition GdFe_1-x Cu_x O₃ (0 ≤ x ≤ 0.3) have been investigated. The effect of copper doping, calcination temperature on the OER performance in alkaline media was studied. The incorporation of Cu²⁺ (0 ≤ x ≤ 0.3) decreases the activity of calcined electrodes at 800 °C from 6.33 to 2.79 mA cm⁻², while that containing 0.2 mol of copper calcined at 600 °C, exhibits the higher activity (9.66 mA cm⁻²) at 0.66 V. The stability study during 8 h indicates that the undoped electrode calcined at 800 °C, exhibits relatively a better stability of the OER performance compared to that doped with 20% of copper calcined at 600 °C. The achieved results show promising potential for cost-effective hydrogen generation using earth-abundant materials and cheap fabrication processes.     

Effect of sodium dodecyl benzene sulfonate (SDBS) on the performance of anaerobic co-digestion with sewage sludge,food waste,and green waste

Abstract

The anionic detergent sodium dodecyl benzene sulfonate (SDBS) inhibits anaerobic solid waste fermentation process in mesophilic anaerobic digesters. In this study, the effect SDBS on the performance of anaerobic digestion (AD) of mixture of sewage sludge, food waste, and green waste serving as substrate was investigated. The batch experiments were conducted with five SDBS concentrations namely 0, 0.01, 0.02, 0.05, 0.1, and 0.2?g/g (SDBS/dry sludge) under mesophilic condition (37?±?1?°C) and lasted for 63?days. The results showed that the presence of SDBS remarkably increased the release of protein and carbohydrate, and resulting in the serious accumulation of volatile fatty acids (VFAs), especially for propionate accumulation. Likewise, the observed variations in enzyme activities associated with different stage of AD revealed that methanogenesis was quite sensitive to SDBS and inhibited by the increase of SDBS addition. Meanwhile, the presence of SDBS decreased the pH value and the concentration of free ammonia, but increased the concentration of NH₄⁺-N. Furthermore, the production of biogas was reduced by SDBS. In conclusion, SDBS addition has a negative impact on anaerobic co-digestion. On the one hand, methanogens were severely inhibited and biogas yield decreased remarkably, on the other hand, the accumulation of VFAs was excessive. Thus, the presence of surfactant (SDBS) in the municipal organic waste should be concerned during the waste disposal via anaerobic digestion process.     

Polyphosphates as inhibitors of surface mould growth on hard cheese during ripening

A novel treatment using polyphosphates to protect cheeses against superficial mould growth was assayed. The treatments were: control commercial paint with natamycin (I), commercial paint based on polyvinyl–water (II), immersion in a saturated solution of polyphosphate (III), immersion and commercial paint (IV), commercial paint of polyphosphate solutions (V) and immersion and commercial paint of a saturated solution of polyphosphates (VI). The cheeses were ripened for 6 months. Superficial mould growth was inhibited in groups IV and VI when compared to cheeses from the control group (I). Statistical sensory analysis made between cheeses from groups IV and I (control) showed no significant differences.     

Curcumin loaded fish scale collagen-HPMC nanogel for wound healing application: Ex-vivo and In-vivo evaluation

The objective of the present investigation was to formulate curcumin loaded fish scale collagen (FSC)-hydroxypropyl methyl cellulose (HPMC K100) nanogel (CNG) for wound healing application. The curcumin nanoemulsion was prepared, characterized and loaded in FSC-HPMC nanogel. The nanogel was evaluated for ex-vivo permeation, in-vivo, skin irritation, and stability study. Ex-vivo permeation study demonstrated that CNG prolonged release and exhibited higher percent contraction value of wound compared to other formulations. In skin irritation study, formulation produced the score of less than 2 compared to control. It concluded that curcumin loaded FSC-HPMC nanogel could be prepared for wound healing applications.     

Morphological exploration of chemical vapor–deposited P-doped ZnO nanorods for efficient photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting is beneficial and has received attractive attention due to a greater potential to generate hydrogen and oxygen from water by using plentiful solar light to solve the problem of energy crisis. Various active semiconductor materials are used in PEC water splitting applications. Nevertheless, in past decades, most of the researchers suggested that titanium oxide (TiO₂) is the best photoanode for this type of applications. Now, Zinc oxide (ZnO) is considered a perfect substitution to TiO₂ due to its comparable energy band structure and superior photogenerated electron transfer rate. In this study, bare and phosphorous-doped ZnO nanorods were successfully developed on fluorine-doped tin oxide-coated glass (FTO) substrate by chemical vapor deposition. X-ray diffraction (XRD) pattern authenticated hexagonal structure formation with strong diffraction peak of (101), which showed that ZnO nanorods were perfectly developed along c axis. The optical and morphological properties were analyzed by UV–Vis and scanning electron microscopy images. The energy-dispersive X-ray spectra demonstrated that doping agent phosphorous was present in ZnO nanorods. The PEC properties of the developed ZnO nanorods were further investigated and obtained results suggested that a small amount of phosphorous-doped ZnO nanorods enhances their PEC performance.     

The importance of identifying the true catalyst when using Randles-Sevcik equation to calculate turnover frequency

Water splitting will become important to store excess renewable electrical energy into hydrogen. Although the oxygen-evolution reaction (OER) by water oxidation is a critical reaction for water splitting, further investigations are needed to find the details of the OER mechanism for various electrocatalysts. More in particular for homogeneous electrocatalysts, the Randles-Sevcik equation has been extensively applied to determine the turnover frequency (TOF). Herein, using vitamin B₁₂ as a case study, we show that the dynamical deposition/dissolution of the heterogeneous catalyst during OER makes the Randles-Sevcik equation too complicated to be used for calculating the TOF. Indeed, the conventionally applied post-characterization methods do not provide sufficient accuracy to prove the homogeneity of OER mechanisms; thus, using the Randles-Sevcik equation to calculate the TOF is not necessarily correct.     

Effect of water distribution in gas diffusion layer on proton exchange membrane fuel cell performance

Water management of proton exchange membrane fuel cells remains a prominent issue in research concerning fuel cells. In this study, the gas diffusion layer (GDL) of a fuel cell is partially treated with a hydrophobic agent, and the effect of GDL hydrophobicity on the water distribution in the fuel cell is examined. First, the effect of the position of the cathode GDL hydrophobic area relative to the channel on the fuel cell performance is investigated. Then, the water distribution in the fuel cell cathode GDL is observed using X-ray imaging. The experimental results indicate that when the hybrid GDL's hydrophobic area lies on the channel, water tends to accumulate under the rib, and the water content in the channel is low; this improves the fuel cell performance. When the hydrophobic area is under the rib, the water distribution is more uniform, but the performance deteriorates.     

Nonwoven Ni–NiO/carbon fibers for electrochemical water oxidation

The development of technologically efficient anodes for water oxidation is crucial to improve hydrogen production via water splitting. Electrodes based on metallic active sites dispersed in carbon matrices have been shown to be an attractive way to attain this goal. However, challenges remain to prevent catalyst agglomeration that otherwise can result in a decrease of performance over time.In this work, we report an alternative and efficient method to produce nickel-nickel oxide nanoparticles-embedded in carbon nanofibers (Ni–NiO/C), by the solution blow spinning (SBS) process. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses show the carbon nanofibrillar matrix as a robust support, with well-dispersed nickel nanoparticles on the surface. The responses of the linear scanning voltammetry, cyclic voltammetry and electrochemical impedance spectroscopy demonstrate how a small fraction of nickel on the fiber surface (≈1.2–5.3%) is enough to promote substantial improvement in performance (η = 278 and 309 mV vs RHE for 10 mA cm^?2) and a significant turnover frequency (TOF) values of 1.38 (η = 278) and 1.30 s^?1 (η = 309). These promising results are correlated with a large amount of Ni³⁺ present on the fiber surfaces, as identified by X-ray Photoelectron Spectroscopy (XPS). This work provides a low-cost and rapid preparation technique that can be extended for the manufacture of a wide variety of electrodes based on metals supported on carbon nanofibers.     

Conflict-resolving behaviour of project managers in international projects: A culture-based comparative study

The cultural issue is obtaining more and more consideration in international project management and the risky nature of international projects reinforces this consideration. Conflict-resolving behaviour is one of the cultural behaviours that can affect project success. This paper addresses comparative research between Chinese and South African project managers in their conflict-resolving behaviour, as regards certain project activities relating to international projects. The results show that the differences between the conflict-resolving behaviours of the two groups are significant, in terms of project communication, negotiation and conflict-resolution activities. This research will fill a gap in the cross-cultural conflict resolving behaviour comparison study of the international project management arena. The results and suggestions should assist practitioners and researchers involved in international R&D and technologic project management to improve their skills in communication, collaboration and staff training.