李子溪流域水土流失及泥沙输移规律初步研究

为了探讨长江上游流域水土流失及泥沙输移规律，选取嘉陵江中游的支流李子溪为典型流域进行分析研究，在实地调查，野外测验及应用１９６０年－１９９１年实测降雨、径流、输沙资料的基础上，利用单因子相关分析和多因子回归分析，分别建立了输水利沙量、最大输沙率计算方程。在此基础上，参照径流瞬时单位线原理，以线性时不变系统为基础，建立输沙瞬时单位线模型。通过输沙单位线与时段净侵蚀量的卷积得到流域出口断面的输沙率过程     

大藤峡水利枢纽及在珠江防洪与水资源综合利用中的地位与作用

大藤峡水利枢纽是珠江流域西江干流上的控制性水利枢纽工程，在流域防洪及水资源方面具有不可替代的作用，同时具有发电、航运与灌溉等综合利用效益。国务院在对《珠江流域防洪规划》的批复中要求抓紧做好前期工作．积极促进大藤峡水利枢纽建设。本文对大藤峡水利枢纽及在珠江防洪与水资源综合利用中的地位与作用进行了简要的介绍。     

Analysis of trace mercury in water by solid phase extraction using dithizone modified nanometer titanium dioxide and cold vapor atomic absorption spectrometry

A new method for analysis of trace mercury in water samples was developed, based on the combination of preconcentration/separation using dithizone-modified nanometer titanium dioxide (TiO2) as a solid phase extractant and determination by cold vapor atomic adsorption spectrometry (CVAAS). Dithizone was dissolved with alcohol and loaded on the surface of nano-sized TiO2 powders by stirring. The static adsorption behavior of Hg2 on the dithizone-modified nanoparticles was investigated in detail. It was found that excellent adsorption ratio for Hg2 could be obtained in the pH range of 7-8 with an oscillation time of 15 min, and a 5 mL of 3.5 mol·L-1 HCl solution could quantitatively elute Hg2 from nanometer TiO2 powder. Common coexisting ions caused no obvious influence on the determination of mercury. The mechanisms for the adsorption and desorption were discussed. The detection limit (3σ) for Hg2 was calculated to be 5 ng·L-1. The proposed method was applied to the determination of Hg2 in a mineral water sample and a Zhujiang River water sample. By the standard addition method, the average recoveries were found to be 94.4%-108.3% with RSD (n = 5) of 2.9%-3.5%.     

玻璃两面重叠手印拍摄机理

根据斯涅尔定律和菲涅尔公式阐述清水衬底法消除玻璃下界面手印或玻纹的影像，以及用偏振光，紫外线拍摄玻面痕迹的方法和机理。     

The Application of Ozone for Water Treatment In The United Kingdom — Current Practive and Recent Research

Only two water works in the UK apply ozone at present as part of their treatment, onefor taste and odor control and theother forcolor removal. Forthetwo applicationus ozone was the most economical option at thetime theplants were installed andozone has been successful for the purpose for which it was designed.     

Hybrid gas-to-particle conversion and chemical vapor deposition for the production of porous alumina films

Porous alumina films can be found in a wide variety of materials, including filters, thermal insulation components, dielectrics, biomedical and catalyst supports, coatings and adsorbents. Production methods for these films are as equally diverse as their applications. In this work, a hybrid process based upon chemical vapor deposition and gas-to-particle conversion is presented as an alternative technique for producing porous alumina films, with the main advantages of solvent-free, low substrate-temperature operation. In this process, nanoparticles were produced in the vapor phase by reaction of aluminum acetylacetonate in the presence of oxygen. Downstream of this reaction zone, these nanoparticles were collected via thermophoresis onto a cooled substrate, forming a porous film. Some deposited films were subjected to post-processing in the form of annealing in air. Fourier-transform infrared spectra and X-ray energy-dispersive spectroscopy analysis confirmed the production of alumina at processing temperatures above 973 K. X-Ray diffraction revealed that the films were amorphous. Film thickness, ranging from 30 to 250 μm, and the average deposition rate were determined from scanning electron microscopy results. From transmission electron microscopy, the average primary particle size was determined to be approximately 18 nm and the formation of nanoparticle aggregates was evident. Annealing of the films at temperatures ranging from 523 to 1173 K in the presence of air did not have an effect on particle size. The specific surface area of the powder composing the films ranged from 10 to 185 m² g⁻¹, as determined from nitrogen gas adsorption by the Brunauer–Emmett–Teller method.     

高压变频器在高炉冲渣水泵上的应用

介绍了HARSVERT—A06／035型高压变频器的性能及其在新4号高炉冲渣水泵上的应用。     

国外大型调水工程渠道运行控制综述

与常规的以经验为主的运行方式相比，考虑了水动力学影响、以多渠池串联的整个渠道系统为研究对象的渠道运行控制在增加调水工程的安全性、降低运行成本、提高输水效率等方面能取得更佳的效果。国外关于调水工程渠道控制的研究起步较早，基于非线性偏微分圣维南方程组发展了多种离散化、线性化等简化方法，建立了相应的控制模型，并从不同角度确定了其控制方法以及控制算法。参考已有的研究思路和方法，总结国外渠道运行控制的成果，对我国南水北调工程的运行控制有着重要的借鉴意义。     

Shift in thinking to address the 21st century hunger gap

The present water policy debate is dominated by the 30 yr old mission to secure water supply and sanitation to all people. The water needed to produce a nutritionally acceptable diet for one person is however 70 times as large as the amount needed for domestic water supply. The food security dilemma is largest in arid climate regions, a situation constituting a formidable challenge. It is suggested that an additional 5 600 km³/yr of consumptive water use will be needed to produce an adequate amount of food by 2050 – i.e almost a doubling of today’s consumptive use of 6800 km³/yr. Past misinterpretations and conceptual deficiencies show the importance of a shift in thinking. Combining the scale of the challenge and the time scale of the efforts to feed humanity and eradicate hunger leads to an impression of great urgency. This urgency strengthens the call for international research both for supporting agricultural upgrading, and for much better handling of issues of environmental sustainability. What stands out is the need of a new generation of water professionals, able to handle complexity and able to incorporate water implications of land use and of ecosystem health in integrated water resources management. It will for those reasons be essential and urgent to upgrade the educational system to producing this new generation.     

Na-MMT对MCPA6／PPO原位共混体系的影响

采用水辅助分散钠基蒙脱土（Na—MMT）通过原位共混的方法制备了浇铸尼龙6（MCPA6）和聚苯醚（PP0）共混物（95／5）。通过SEM、TEM和流变等考察了非常少量的Na-MMT对共混物形貌的影响。结果发现，PP0在MCPA6基体中尺寸从几十微米下降到一个微米左右，且所有的Na-MMT都分散在MCPA6基体中。DSC分析表明PPO分散相的尺寸影响了MCPA6的结晶行为。相比于纯的MCPA6，PPO和Na-MMT的协同作用提高了纳米复合材料的强度和韧性。