利用钨极氩弧焊技术修复1#汽轮机转子的实践

本文主要介绍了我厂利用钨极氩弧焊将1#发电机组汽轮机转子修复的工艺过程.     

塔楼与桅杆的风效应影响

本文通过对广播电视塔上的塔楼及桅杆结构的模拟计算和对比分析，探讨了两者之间风效应的相互影响及有关问题。     

用废旧橡胶生产精细胶粉的空气涡轮制冷低温粉碎法

利用先进的空气涡轮制冷系统，在低温条件下，将废旧橡胶进行冷冻，粉碎，制成60目以上细度的精细胶粉，此法简称ATCG法，它的冷冻能耗成本仅为国际上通用的液氮法的十分之一，整个工艺过程不产生二次污染，为精细胶粉的制取开辟了一条新途径。     

Verification of wind resource study of a Scottish region

In a survey of the practical wind energy resource present in the Tayside Region of Scotland it was estimated that over 1500 km² of land is suitable for wind energy development in the Region after consideration of a range of physical, technical and institutional factors. Wind speed data for this survey was obtained from the Energy Technology Support Unit (ETSU) UK Wind Speed Data Package. To verify the wind speeds obtained from the ETSU package a representative sample of sites in and around the identified areas of potential in Tayside were modelled for mean annual wind speed using the Wind Atlas Analysis and Application Program (WA^sP). The wind speeds for the sites obtained from the WA^sP analysis were compared with those obtained from the ETSU UK Wind Speed Data Package and conclusions drawn as to the reliability of the Tayside wind energy survey and the general applicability of the ETSU package for broad wind energy resource assessment.     

Wind energy resource assessment for five locations in Saudi Arabia

The analysis of recently collected wind data at five sites in Saudi Arabia namely, Dhulum, Arar, Yanbu, Gassim and Dhahran is presented. The five sites represent different geographically and climatologically conditions. The data collected over a period spanned between 1995 and 2002 with different collection periods for each site. Daily, monthly and frequency profiles of the wind speed at the sites showed that Dhulum and Arar sites have higher wind energy potential with annual wind speed average of 5.7 and 5.4 m/s and speeds higher than 5 m/s for 60 and 47% of the time, respectively. The two sites are candidates for remote area wind energy applications. The costal site's, i.e. Yanbu and Dhahran wind speed data indicated that the two sites have lower annual wind speed averages and wind blows at speed higher than 5 m/s during afternoon hours. That makes the two sites candidates for grid connected wind systems for electrical load peak shaving. The data of Gassim site showed that the site has the lowest wind energy potential compared to the others. The annual energy produced by a Nordex N43 wind machine is estimated to be 1080, 990, 730, 454 and 833 MWh for Dhulum, Arar, Yanbu, Gassim and Dhahran, respectively. The analysis showed that the estimated annual energy produced by the machine based on 10 min averaged data is 2.5% higher than the estimated energy based on 30 min averaged data.     

CO2 abatement by co-firing of natural gas and biomass-derived gas in a gas turbine

In this work, a possible way for partial CO₂ emissions reduction from gas turbine exhausts by co-firing with biomass is investigated. The basic principle is the recirculation of a fraction of the exhausts (still rich in oxygen) to a gasifier, in order to produce syngas to mix with natural gas fuel. As biomass is a CO₂ neutral fuel, the fraction of replaced natural gas is a measure of CO₂ removal potential of the powerplant.     

无差拍控制提高变速异步风力发电系统的故障承受能力

变速风力发电机对于电网扰动、故障以及电网电压跌落非常敏感，当上述情况发生时风力发电机将从电网切除，直到电网恢复正常才能重新投入运行。如何在电网发生扰动时保持风力发电机的正常运行是一个有挑战性的课题。未来的电网规范甚至要求在电网发生故障时风力机组仍能保持运行，这就要求必须安装保证风电机组低电压运行的控制装置。文中针对采用全载换流器与电网进行连接的异步风力发电机组提出了相应的风电机组低电压控制器及控制策略，无须进行硬件改造即可实现电网故障情况下风电机组不退出运行。其中，风电机组电气子系统控制器基于无差拍控制策略进行设计。算例给出了300 kW的风电机组在30%电压跌落情况下的暂态过程，没有加入控制器之前风电机组将停机，加入之后则可以保持运行，验证了所提方法的正确性。     

Development of Low-Oxide MCrAlY Coatings for Gas Turbine Applications

Advanced high-energy plasma systems are being used to achieve the benefits of the high-velocity oxy-fuel (HVOF) system without losing the inherent advantages of plasma for coating of gas turbine parts. MCrAlY coatings play a very important role in the performance and reliability of gas turbine components. One of the important considerations for next generation of gas turbines, which have more demanding conditions and need to withstand ever increasing operating temperatures, is that they should possess very low oxygen content levels in the coating. Low oxygen content coatings are applied by the expensive low-pressure plasma spray (LPPS)/vacuum plasma spray (VPS) technique for critical components in aero- and land-based gas turbines. This work deals with the development of low-cost LPPS equivalent coatings (having low oxygen content) using the high-energy high-velocity plasma spray (HEHVPS) gun and inert gas shroud. A comparison has also been made with CoNiCrAlY coatings by HVOF.     

ABB变频器在双馈发电机试验台上的应用

本文介绍了风力发电系统目前存在的技术方案，重点介绍了ABB用于双馈式风力发电系统的变频产品ACS800—67的特性，并对由其构建的发电机测试平台的案例进行了实验分析。     

汽轮机回热系统给水焓升的最优分配

从汽轮机回热系统的实际情况出发，运用非线性规划理论和计算机技术，解决了给水焓升设计中的最优分配问题。结合具体实例，针对国产200MW汽轮机回热系统给水焓升的分配进行了说明。