联合循环发电技术及应用

阐述了燃气-蒸汽联合循环工艺及燃气轮机布置、燃气轮机的理论与实际循环特点,介绍了这一技术在通钢的应用。     

机组油膜振荡故障的诊断和处理

通过对广州发电厂1号机组3号轴承突发剧烈振动的现象和测试结果的分析，对振动故障进行诊断并提出解决办法，对3号轴承轴瓦进行处理后，机组恢复正常运行状态。     

Determination of gust action stress cycle counts for fatigue checking of line-like steel structures

The classical spectral analysis of structural response to a gusty wind is applied to the prediction of fatigue damage as expressed by the rate of accumulation of Miner's quotient, using the rainflow algorithm to establish stress-range cycle counts. A general solution in chart form is given for the effect of the broad-band (quasi-static) part of the response spectrum, together with an algebraic formulation for its combination with the effect of narrow-band (quasi-resonant) response.A procedure for integration of the long-term expectation of Miner's quotient is indicated. It is concluded that quasi-static response alone is unlikely to pose a serious fatigue problem. With generally anticipated levels of dynamic response, fatigue damage is greatly increased, but can be controlled at acceptable levels by care to avoid features especially sensitive to fatigue.     

Danish and Norwegian wind industry: The relationship between policy instruments, innovation and diffusion

This article compares the role of policy instruments in stimulating long-term technological change in Danish and Norwegian wind industry. It concludes that although predictability has periodically been low, Denmark's broad portfolio of policies and measures has been well adapted to the different stages in the development of its wind industry. This has contributed to a high degree of innovation, successful establishment in niche markets, high degree of diffusion and establishment of domestic and international mass markets, and—in recent years—an increasingly successful replacement of senescent technology with new. The motivation of Norway's wind energy policies and measures—at least up until the late 1990s—has been to increase power supply rather than to stimulate industrial development and technological change. Policies and measures have been weaker than in Denmark; have been less stable over time; and stimulated the demand side much less. They have not sufficiently covered the wind industry's perceived needs on different stages in the development of new technology, and have not sufficiently stimulated continuous improvement, learning and new product development (dynamic efficiency) in industry. This has been part of the reason why there has been only a limited extent of innovation and diffusion of wind technology in Norway.     

An analytical expression for the power coefficient of an ideal horizontal-axis wind turbine

The paper shows that an analytical evaluation of the power coefficient C_p for an ideal horizontal-axis wind turbine can be made via an expression giving the direct relationship of C_p and the axial induction factor a. The results obtained agree closely with those obtained numerically from the usual integral expression involving several variables.     

直接探测测风激光雷达的性能分析

综述了激光雷达大气风场测量的方法，提出了采用直接探测到量三维风场分布的F-P干涉仪方法，简述了测量原理，分析了系统的性能和测量误差，比较了基于分子散射和气溶胶散射的系统测量精度，给出了基于瑞利散射的激光雷达系统方案。     

非定常流弯肘型尾水管不规则压力脉动预测

尾水管内螺旋状涡带引起的压力脉动是造成混流式水轮机机组振动的主要原因之一,直接威胁机组的安全运行。为此,提出一种基于CFD数值计算的水轮机尾水管压力脉动数字化预测法,并利用此法对一大型混流式水轮机偏工况下尾水管内水流流动进行了长时间非定常流计算,讨论该工况下尾水管内死水域与涡带的运动规律,预测了尾水管的不规则压力脉动,压力脉动分析结果表明,其波形、频率、相位与实际基本一致。     

Use of oxygen for the cleaning, passivation, and preservation of power-generating equipment at the Kharanorskaya SAPP

Studies conducted on two power-generating units at the Kharanorskaya SAPP relative to the steam-water-oxygen passivation, preservation, and partial cleaning of all boiler-heating surfaces, including the surfaces of the reheater, and passivation of the surfaces of the high-pressure heaters on the steam and water sides by the steam-oxygen method, as well as partial passivation, preservation, and cleaning of turbine blading are presented. __________ Translated from élektricheskie Stantsii, No. 6, pp. 56–64, May, 2006.     

Technical risk involved in long-term operation of steam turbines

The scope of the paper is the assessment of the technical risk involved in long-term operation of power units. Detailed analyses have been conducted for steam turbine components. The sources and consequences of risk have been identified and the probability of turbine components failure calculated. The quantitative assessment of the risk has been made and possibilities of its reduction discussed.     

运用现代CFD方法设计高效率的汽轮机

论述了运用现代计算流体动力学(ComputationalFluidDynamics,CFD)技术设计高效率汽轮机的方法,典型应用的实例有全三维叶片级流场、叶片汽封和排汽蜗壳计算。计算结果和实际是相符的。进一步对结构性单元和非结构单元程序的计算结果进行了比较,已证明,非结构单元CFD程序用于复杂形状的流场计算时,结果与实际相当一致,并具有独特的功能。