The Effect of Formulation on Radioiodide Thyroid Uptake in the Hyperthyroid Cat

This investigation was designed to compare in vitro dissolution profiles from sodium iodide capsules with radioiodide thyroid uptake in hyperthyroid cats using sodium iodide capsules prepared with a formulation exhibiting a complete release of radioiodide (I-123) in vitro and a formulation with an incomplete release of radioiodide. In vitro dissolution profiles for I-123 sodium iodide capsules with two different formulations were determined using the USP XXIII dissolution test. The two formulations studied in vitro were sodium phosphate dibasic powder with 1% magnesium stearate and calcium phosphate dibasic powder with 3% magnesium stearate. By 20 min after initiation of the dissolution test, over 95% of the I-123 was released from capsules of sodium phosphate dibasic powder. The capsules of calcium phosphate dibasic powder reached 75% at 65 min, with no further release occurring thereafter. There was a statistically significant difference in the dissolution profiles of the two formulations. The thyroid uptake of I-123 from capsules exhibiting complete release and incomplete release of radioiodide was determined in hyperthyroid cats. At 4 hr, the mean percentage thyroid uptake value for sodium phosphate dibasic powder with 1% magnesium stearate (complete release formulation) was 12.0% compared to 9.4% for calcium phosphate dibasic powder with 3% magnesium stearate (incomplete release formulation); at 24 hr, the values were 34.4% compared to 23.7%. The data suggest that the incomplete dissolution profile observed in vitro may correlate with a reduction in the bioavailability of the radioiodide in vivo. However, using the Wilcoxon signed rank test, statistically significant differences did not occur between the complete release formulation and incomplete release formulation at either 4 hr or 24 hr (p >. 05). The results of the in vivo study with five hyperthyroid cats were not conclusive due to the variability in response between individual cats.     

应用水化硅酸盐纳米粉体制备块体材料

以磨细生石灰和硅质原料的混合物为前驱物,采用动态水热合成方法制备了水化硅酸盐纳米粉体.借助SEM、TEM及氮吸附等测试方法,分析了制得的水化硅酸盐粉体的形貌、粒径和比表面积.将制得的水化硅酸盐纳米粉体压制成块状固体.采用正交设计方法研究了成型压力、水泥掺量、纤维掺量、聚合物掺量等因素对块体材料力学性能的影响.结果表明:由该粉体压制成的块体材料立即具有强度和耐水性,且表观密度低;成型压力是影响其力学性能最显著的因素.     

自动送粉激光熔覆装置及工艺研究

研制了一种工作稳定性好、粉末流量连续可调的自动送粉装置。经A_3钢表面激光熔覆WF-150不锈钢合金粉末的研究表明,所获得的激光熔覆层均匀连续、无宏观气孔和裂纹,粉末利用率高达94％。     

70%稻瘟灵可湿性粉剂的研制

制备了国内外文献未见报道的70%稻瘟灵可湿性粉剂(WP),对该剂型的配方组成、加工工艺、贮存稳定性进行了研究,并对其各项性能进行了测试,确定了优惠配方。实验结果表明,该产品的各项指标均符合可湿性粉剂标准的要求,悬浮率在90%以上,润湿时间在1min以内,在40±2℃下贮存60天后的分解率小于5%。     

盐+碱协同对多孔碳电极材料电化学性能的影响

超级电容器作为一类新兴的能量存储转换器件,因其充放电速度快、寿命长和安全环保的特点而受到推崇。其中,用于超级电容器的电极材料一直是人们的研究重点,综合原料来源、价格和制备工艺等因素,多孔碳电极材料成为首选。盐模板法和KOH化学活化法都是制备多孔碳电极常用的方法,前者产物的孔结构以介孔为主,但操作复杂;后者活化产物比表面积大,可以精确控制多孔碳电极的孔径分布和孔体积,但该法活化后的多孔碳多以微孔为主。若将两者结合,形成优势互补,协同构建合理的碳材料结构,有助于提升多孔碳电极的电化学性能。以锂电负极行业的固废——针状焦的生焦粉为原料,利用模板和化学活化相结合的方法制备电极材料,探索盐（KCl）和碱（KOH）的添加比例对碳电极材料电化学性能的影响。研究结果表明,两种方法相结合制备得到的多孔碳样品的碳结构以表面缺陷较多的无定型碳为主。随着KOH加入量的增加,无定型结构的碳增加,但是加入过量的KOH并不能提高无定型碳的含量。三电极测试分析发现,样品PC-2表现出优异的电容性能,在1 A·g^-1的电流密度下,质量比电容达到266.9 A·g^-1;在10 A·g^-1的高电流密度下,容量保持率高达79.4%。该电极材料的内阻仅为0.67 Ω,并且双电层电容性能有极短的响应时间。当m(生焦粉)∶m(KCl)∶m(KOH)=1∶3∶2时,KCl和KOH的协同活化效果达到了最佳,显著提高了碳电极材料电荷的传输能力,且能有效地缩短电解质离子在材料内部的扩散路径,表现出较快的充放电速度。     

岩石破坏后力学特性及其对天然气开采的影响

地层在失去应力平衡后,岩石将发生破坏,而岩石的岩性差异导致破坏后的力学特性也相差较大。岩石在峰值强度后将产生走向各异的裂缝;若岩石在破坏后产生大量岩粉,将堵塞地层中的喉道和裂缝,导致储层的渗流能力降低。选用四川盆地4个区块的4类岩性的多个岩样进行三轴压缩实验,根据岩样峰值强度后的破坏模式定义了3种类型:Ⅰ型岩样破坏后将产生拉伸裂缝,并且应力突降;Ⅱ型岩样破坏后将产生剪切裂缝,应力缓慢降低;Ⅲ型岩样破坏后将产生拉伸与剪切裂缝,应力往复变化。Ⅰ型与Ⅱ型岩样在破坏后形成的裂缝较为单一,且裂缝面光滑;Ⅲ型岩样在破坏后形成走向各异的裂缝,且产生大量的岩粉,影响天然气开采。针对Ⅲ型岩样破坏后产生大量的岩粉,以煤岩为例,提出采用超前预防处理以及在排采期进行治理的措施。     

粉状饲料混合制粒机的设计

针对粉状混合饲料的生产和运输、储藏中存在的问题,设计了融搅拌混合和颗粒成型为一体的饲料生产机械.介绍了整机的结构和工作原理,对饲料的混合室、搅拌器、螺旋输送挤压器、颗粒成型机构的主要结构特点及相应参数进行了分析与计算.     

矿物绝缘电缆铜带纵包氩弧焊焊接连续轧制生产工艺

简述了矿物绝缘电缆铜带纵包氩弧焊焊接连续轧制的生产工艺,并对该生产工艺中可加硅油氧化镁粉运用、定芯管的设计、氩弧焊焊接、轧辊轧制以及中频感应退火作了描述,同时对连续生产过程中相关工艺作了说明。     

The influence of temporary hydrogenation on ECAP formability and low cycle fatigue life of CP titanium

It is generally believed that thermo-hydrogen processing has a beneficial effect on tensile ductility and fatigue properties of titanium. This study was concerned with investigating whether this also applies to titanium of commercial purity (CP) with an ultrafine-grained structure obtained by equal-channel angular pressing (ECAP). It was shown that despite the possibility to manipulate the microstructure of titanium the thermo-hydrogen processing offers, temporary hydrogenation was not able to improve ductility and low cycle fatigue life of CP titanium over the levels achievable by straight ECAP.     

A 3D multilevel model of damage and strength of wood: Analysis of microstructural effects

A 3D hierarchical computational model of damage and strength of wood is developed. The model takes into account the four scale microstructures of wood, including the microfibril reinforced structure at nanoscale, multilayered cell walls at microscale, hexagon-shape-tube cellular structure at mesoscale and annual rings at the macroscale. With the use of the developed hierarchical model, the influence of the microstructure, including microfibril angle (MFA), the cell shape and the wood density (annual ring structure), differences between earlywood and latewood as well as microstructural arrangements and cellulose strength distributions on the tensile strength of wood is studied numerically. Good agreement of the theoretical results with experimental data has been obtained.