ZnFe2O4/ZnO纳米复合纤维的制备及性质研究

利用静电纺丝和原子层沉积（ALD）方法制备了ZnFe2O4/ZnO纳米复合纤维并对其进行退火处理。利用扫描电子显微镜、X射线衍射仪、光致发光、紫外-可见分光光度计对其进行了性质的研究。结果表明,制备样品为一维核壳结构的纳米复合纤维,ZnO壳层由于高温退火的原因结晶度提高,ZnFe2O4纳米纤维与ZnO薄膜间的表面化学键连结起来并成功复合,降低了ZnO自由载流子的重结合几率,实现了光生载流子的大程度分离。并且直观的比较了不同催化剂的降解性能。     

Reaction behaviors and specific exposed crystal planes manipulation mechanism of TiC nanoparticles

Titanium carbide (TiC) nanoparticles with well-designed exposed crystal planes perform intriguing prospects for functional and engineering applications. In this study, a simple and controllable in situ synthesis strategy was proposed for the synthesis of TiC nanoparticles with specific morphology. Reaction behaviors suggested that most of TiC nanoparticles were formed by an instantaneous reaction between Al₃Ti and Al₄C₃ in the Al-rich melt and the resultant morphology was controlled by the discrepant growing rates of (100) and (111) crystal planes. In addition, a growth morphology control model was presented for the prediction and manipulation of the morphology of TiC nanoparticles by the doping of different alloying elements Me (Me = Cu, Mg, Mn, Zn, and Si). According to the morphological observations and density functional theory analyses including the interface energy, charge density differences, and orbital hybridization: Cu, Mg, and Zn atoms could stabilize the Al/TiC(111) interface, whereas Mn and Si atoms promoted the rapid growing and disappearance of the TiC(111) planes in the Al melt. This work provides a feasible way to intelligently design and manipulate TiC nanoparticles with desirable exposed crystal planes, and exhibits a promising prospect for personalized applications.     

Iodine-loaded poly(silicic acid) gellan nanocomposite mucoadhesive film for antibacterial application

Iodine-loaded poly(silicic acid) gellan nanocomposite film was fabricated and evaluated for antibacterial properties. Poly(silicic acid) nanoparticles were synthesized by condensation of silicic acid under alkaline conditions in the presence of polyvinyl pyrrolidone, phosphate ions, and molecular iodine. The nanoparticles were incorporated into gellan dispersion to prepare gellan nanocomposite film using the solvent casting method. The nanocomposite films were characterized by Fourier transformed infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction studies. The results of characterization studies indicated improved thermal stability and an increase in the degree of crystallinity. The scanning electron micrographs and energy dispersive X-ray spectrum confirmed the uniform dispersion of silica and iodine in the nanocomposite films. The analysis of physical and mechanical properties revealed the enhanced tensile strength, moisture resistance, and higher folding endurance of poly(silicic acid) gellan nanocomposite films as compared to gellan film. Further, the iodine-loaded poly(silicic acid) gellan nanocomposite films showed good antibacterial activity against Staphylococcus aureus and Escherichia coli and effective mucoadhesive strength. The results indicate that iodine-loaded poly(silicic acid) gellan nanocomposite mucoadhesive film can be used for potential antibacterial applications in pharmaceuticals.     

Facile preparation of homogenous waterborne poly(urethane/acrylate) composites and the correlation between microstructure and improved properties

Homogenous waterborne polyurethane/polyacrylate emulsions were synthesized based on the prepared polyurethane and polyacrylate through a facile process. The attention was attracted to the miscibility and performance of waterborne polyurethane and polyacrylate. The structures and properties of waterborne polyurethane and waterborne polyurethane/polyacrylate samples were characterized by using Fourier transform infrared spectroscopy, transmission electron microscope, X-ray photoelectron spectroscopy, X-ray diffractometer, thermogravimetric, and so forth, as well as solid content and tensile testing. The results showed that the micro morphology of waterborne polyurethane/polyacrylate emulsion presented single-phase structure with the stoichiometric polyacrylate content increasing from 33% to 80% to waterborne polyurethane. The waterborne polyurethane/polyacrylate films surface is rich in polyacrylate phase. Meanwhile, waterborne polyurethane/polyacrylate composites showed significant improvement in thermal stability and elongation at break, smaller particle size and narrower particle size distribution comparing with waterborne polyurethane.     

Sodium citrate-assisted synthesis of nano-manganese oxide on carbon fiber for enhancing the mechanical and frictional performances of carbon fiber-reinforced resin matrix composites

Aiming to enhance the carbon fiber (CF)/resin interfacial adhesion, this report describes the novel application of sodium citrate (SC) as an auxiliary reducing agent and surface regulator to control the morphology of nano-manganese dioxide (MnO₂) on the CF surface. The composites were fabricated by means of controlling the molar concentration ratio of SC to Mn source (0:1, 1:3, 1:2, and 1:1) in hydrothermal synthesis. The results reveal that MnO₂ nanosheets on the CF surface become denser as the concentration of SC is 1/3 of Mn source, which makes advance to the surface roughness and surface energy of CF. Simultaneously, the tensile strength of as-prepared composite is increased by 52.8%. The homologous friction coefficient tends to be high and stable and the wear volume is significantly reduced by 63.8 and 26.5% under the applied loads of 3 and 5 N in contrast with the original composites prepared without SC. As a result, it can be inferred that SC plays a crucial role in enhancing the interfacial bonding strength between the CF and matrix, providing insights into the interface control of CF-reinforced resin matrix composites.     

Improvements of the structural,thermal, and mechanical properties of structural adhesive with functionalized boron nitride nanoparticles

Investigations on the production and development of nanoparticle-reinforced polymer materials have been attracted attention by researchers. Various nanoparticles have been used to improve the mechanical, chemical, thermal, and physical properties of polymer matrix composites. Boron compounds come to the fore to improve the mechanical and thermal properties of polymers. In this study, mechanical, thermal, and structural properties of structural adhesive have been examined by adding nano hexagonal boron nitride (h-BN) to epoxy matrix at different percentages (0.5, 1, 2, 3, 4, and 5%). For this purpose, nano h-BN particles were functionalized with 3-aminopropyltriethoxysilane (APTES) to disperse the h-BN nanoparticles homogeneously in epoxy matrix and to form a strong bond at the matrix interface. Two-component structural epoxy adhesive was modified by using functionalized h-BN nanoparticles. The structural and thermal properties of the modified adhesives were investigated by scanning electron microscopy and energy dispersion X-ray spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis techniques. Tensile test and dynamic mechanical analysis were performed to determine the mechanical properties of the adhesives. When the results obtained from analysis were examined, it was seen that the nano h-BN particles functionalized with APTES were homogeneously dispersed in the epoxy matrix and formed a strong bond. In addition that, it was concluded from the experimental results that the thermal and mechanical properties of adhesives were improved by adding functionalized nano h-BN particles into epoxy at different ratios.     

Synthesis and evaluating of carbon nanoallotrope-biomacromolecule gel composites as drug delivery systems

This work was done to assess the role of precursors (agro and graphite) on performance of carbon nanoallotropes-biomacromolecules composite as drug delivery for controlling the release of niacin. In this respect graphene oxide and bagasse-based carbon oxide were synthesized and chelated with chitosan (Cs-GO and Cs-Co). These gel composites were characterized by many techniques [morphology, differential scanning calorimetry, Fourier-transform infrared spectroscopy, swelling, encapsulation efficiency (EE) and loading (L) % of niacin. Another series of experiments was carried out for studying the role of replacing part of carbon nanoallotrope by carboxymethyl cellulose (CMC) on performance of produced drug carries, these systems were coded as Cs-GO-CMC and Cs-Co-CMC. The data showed that, the Cs-GO gel composite provided maximum release of NA, at 5 h, for pH's simulated gastric and intestinal fluids; pH. 2.1 and pH 7.4 (1120 mg/L and 757 mg/L). The incorporation of CMC is not acceptable as it provided low drug release together with burst release of NA-drug, and consequently possible caused tissue irritation or toxicity in the human body. The Cs-GO and Cs-CO systems with relatively low drug loading were recommended for their better controllability system to NA release, which prolonging benefit of human with niacin. The NA release from all investigated gels followed Fickian and non-Fickian diffusion mechanisms.     

Effect of modified layered double hydroxide on the flammability of intumescent flame retardant PP nanocomposites

The dodecyl sulfate intercalated CaMgAl-hydrotalcites (layered double hydroxides [LDHs]) were successfully prepared by co-precipitation method, and characterized by X-ray diffraction analysis, infrared spectroscopy (Fourier transform infrared spectra [FT-IR]), thermogravimetry (TG-DTA), scanning electron microscope, and Brunner−Emmet−Teller (BET). The prepared LDHs were added to the intumescent flame retardant (IFR) polypropylene (PP) nanocomposites, and the limiting oxygen index method (LOI), vertical combustion method (UL-94), cone calorimetry (CCT), and other test methods were used to study its thermal stability and combustion performance. The results showed that when the flame retardant was composed of 23 wt% IFR and 2 wt% O-SDS-LDHs, the LOI value of the material was increased to 31.5%, reaching the V-0 level, and the flame retardant performance was significantly improved. The results also showed that there was a significant synergistic effect between IFR and O-SDS-LDHs, which could improve the thermal stability and graphitization degree of PP nanocomposites. In addition, the peak heat release rate, total heat release, and total smoke production of the PP/IFR/O-SDS-LDHs system were 177 kW/m², 101 MJ/m², and 15.4 m², respectively, which were 82.2%, 51.0%, and 23.0% lower than those of pure PP, respectively. These improvements could be attributed to the presence of dense and continuous char layer formed by the synergistic effect.     

Influence of deposited amine-functionalized Si-MCM-41 in polyacrylonitrile electrospun membranes applied for separation of water in oil emulsions

Among several oil/water emulsion separation technologies, the utilization of nanoparticle-decorated membranes with diverse functionalities has received considerable attention in recent years, particularly if the antifouling capacity can be improved. In this article, we propose a new membrane based on surface-hydrolyzed polyacrylonitrile electrospun membranes and/or decorated with amine-functionalized Si-MCM-41 nanoparticles to be used as oil/water emulsion separation treatment and to determine their antifouling ability. X-Ray photoelectron spectrometry, attenuated total reflectance Fourier transform infrared spectroscopy, and toluidine blue O assay, scanning electron microscopy, contact angle measurements for oil under water and thermogravimetry were used for characterizing the membranes and an assay of permeability was developed to quantify the diffusion of oil molecules across the electrospun membrane. The electrospun and/or decorated membranes showed an underwater oleophobic wettability, which can separate oil-in-water emulsions with 87% separation efficiency, results of fouling experiments, evaluated in terms of rejection and flux recovery ratio, exhibited good antifouling ability, but the membrane decoration process did not lead to superior outcomes compared with undecorated membranes.     

Preparation of homogeneous ZnO nanoparticles via precipitation-pyrolysis with Zn5（CO3）2（OH）6 as precursor

1 Introduction Recently, demands for high product performance products have necessitated a precise control of ZnO particle properties for applications such as electrode of solar cells and photocatalysts. Much attention is given to the high chemical reacti…