Heat transfer and flow of He II in narrow channels

Heat transfer and fluid flow of He II in a long, narrow channel connected to a bath that supplies a constant supply of heat have been investigated by numerical simulations by using the simplified model of Kitamura et al. [Cryogenics 37 (1) (1997) 1]. Such channels are used to cool compact, stable, low-temperature magnets. The fluid flow is driven by natural convection and the mutual friction between the normal fluid and the superfluid.In this model, the thermomechanical effect and the Goter-Mellink mutual friction balance each other. A consequence of this balance is that the velocity and temperature distributions of He II can be characterized by a dimensionless, dependent parameter equal to the ratio of the fluid speeds of internal convection to the total fluid flow. After a sudden application of heat flux, the internal convection dominates over the total fluid flow until the establishment of steady-state temperature gradients. This predicts that the time required to set up the steady-state total fluid flow is proportional to the total heat capacity in the channel.     

5-(4''-甲基联苯-2-基)-1H-四唑的合成研究进展

5-(4-甲基联苯-2-基)-1H-四唑是血管紧张素Ⅱ受体拮抗剂的关键原料,综述其合成方法的研究进展.     

Interconnected power systems with superconducting magnetic energy storage

The objective of this work is to discuss the concept of back‐to‐back interconnection systems with energy storage, especially with a Superconducting Magnetic Energy Storage (SMES) incorporated into a back‐to‐back DC link. In this case, each converter of the back‐to‐back system is used as a power conditioning system for the SMES coils. Since the AC–DC converter can be designed independently of the frequency of the power system, a two‐way switch is connected to the AC side of each converter. This two‐way switch can select the interconnected power systems. By using the two‐way switches, this system can provide the stored energy in the SMES system to each interconnected power system through two AC–DC converters. For instance, lower‐cost power of each power network can be stored through two converters during the off‐peak hours and made available for dispatch to each power network during periods of demand peak. Then this system increases the reliability of electric power networks and enables the economical operations depending on the power demand. This paper describes the unique operations of the back‐to‐back interconnection with SMES and discuses the optimal SMES configuration for a 300‐MW‐class back‐to‐back interconnection. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(2): 37–43, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20482     

凝胶过滤色谱测定高分子量聚乙烯醇分子量和分子量分布

用凝胶过滤色谱对高分子量聚乙烯醇分子量、分子量分布进行剖析。采用Plaquagel-OH色谱柱,0.25mol/LNaNO3,0.01mol/L Na2HPO4-NaH2PO,pH=7的缓冲溶液流动相,流速1ml/min,示差折光检测器,柱温30℃,聚环氧乙烷作标准物。该方法能显著缩短分析时间,提高准确性,可用于对高聚合度聚乙烯醇进行研究和指导生产。     

Photocatalytic degradation of 2,2‐bis(4‐hydroxy‐3‐methylphenyl) propane (BPP) based on molecular recognition interaction

BACKGROUND: Endocrine disruptors in the aquatic environment and their potential adverse effects are currently issues of concern. One of these endocrine disruptors is 2,2‐bis(4‐hydroxy‐3‐methylphenyl)propane (BPP). In this work the molecular recognition interaction of BPP with β‐cyclodextrin (β‐CD) was studied using IR spectroscopy and steady state fluorescence spectroscopy, and the photocatalytic degradation behaviour of BPP based on molecular recognition interaction was investigated in a TiO₂/UV–visible (λ_max = 365 nm) system. This might provide a new method for the treatment of some organic pollutants in wastewater. RESULTS: β‐CD reacts with BPP to form a 1:1 inclusion complex, the formation constant of which is 4.94 × 10³ L mol^?1. The photodegradation rate constant of BPP after molecular recognition by β‐CD showed a 1.42‐fold increase in the TiO₂/UV–visible (λ_max = 365 nm) system. The photodegradation of BPP depended on the concentration of β‐CD, the pH value, the gaseous medium and the initial concentration of BPP. The photodegradation efficiency of BPP with molecular recognition was higher than that without molecular recognition. After 100 min of irradiation the mineralisation efficiency of BPP after molecular recognition by β‐CD reached 94.8%, whereas the mineralisation efficiency of BPP before molecular recognition by β‐CD was only 40.6%. CONCLUSION: The photocatalytic degradation of BPP after molecular recognition by β‐CD can be enhanced in the TiO₂/UV‐visible (λ_max = 365 nm) system. This enhancement is dependent on the enhancement of the adsorption of BPP, the moderate inclusion depth of BPP in the β‐CD cavity and the increase in the frontier electron density of BPP after molecular recognition. Copyright © 2008 Society of Chemical Industry     

Aluminium content of Spanish infant formula

Levels of aluminium in 82 different infant formulae from nine different manufacturers in Spain were determined by acid-microwave digestion and graphite furnace atomic absorption spectrophotometry. The influence of aluminium content in tap water in reconstituted powder formulae was examined and an estimate was made of the theoretical toxic aluminium intake in comparison with the provisional tolerable weekly intake (PTWI). Possible interactions between aluminium and certain essential trace elements added to infant formulations have been studied according to the type or main protein-based infant formula. In general, the infant formulae contained a higher aluminium content than that found in human milk, especially in the case of soya, preterm or hydrolysed casein-based formulae. Standard formulae gave lower aluminium intakes amounting to about 4% PTWI. Specialized and preterm formulae resulted in a moderate intake (11-12 and 8-10% PTWI, respectively) and soya formulae contributed the highest intake (15% PTWI). Aluminium exposure from drinking water used for powder formula reconstitution was not considered a potential risk. In accordance with the present state of knowledge about aluminium toxicity, it seems prudent to call for continued efforts to standardize routine quality control and reduce aluminium levels in infant formula as well as to keep the aluminium concentration under 300 μg l^-1 for all infant formulae, most specifically those formulae for premature and low birth neonates.     

酸溶性钛渣酸解工艺研究

针对攀枝花钛铁矿冶炼钛渣的物化性质，对影响钛渣酸解率和钛液指标的各个因素进行了全面系统的实验室研究，并在年产2000t钛白生产线上进行了工业验证和优化试验，酸解率稳定在93％以上，三价钛控制在1－3g/L，钛液浓度较钛矿酸解提高了40－50g/L，其它钛液指标达到了后续水解工艺的要求。     

N,N′-二(β-十八酰氧基)乙基乙二胺二乙酸钠的合成及性能研究

用 N,N′-二羟乙基乙二胺、氯乙酸钠合成了 N,N′-二羟乙基乙二胺二乙酸钠(中间体),中间体再与硬脂酰氯反应制备了一种新型 Gemini 两性表面活性剂 N,N′-二(β-十八酰氧基)乙基乙二胺二乙酸钠。对产物合成条件进行了考察,优化的反应条件为:n(硬脂酰氯):n(中间体)=2.5,溶剂 V(水):V(氯仿)=1:2,pH=9.0～10.0,反应温度15～20℃,反应时间5 h。通过红外光谱和质谱分析确定了产物结构,并测试了产物的表面性能。结果表明,在25℃时,该产物的临界胶束浓度为0.24 mmol/L,临界胶束浓度下的表面张力为35.7 mN/m;即时泡沫高度为250 mm,5 min 后泡沫高度为220 mm;乳化时间为22.48 min(甲苯-水物系)和4.65 min(正己烷-水物系),亲水-亲油平衡值为5.4,等电点为 pH 3.3～6.5。     

Effect of fluoropolymer antidripping agent on the microstructure and properties of polyesters

Poly(ethylene terephthalate) (PET) is of excellent mechanical properties and melt processability and is widely used as raw material for textile fibers. However, the flame retardant properties of PET were rather poor, and both reactive and additive phosphorus- and halogen-containing compounds have been employed to enhance the reaction-to-fire properties while the meltdripping behaviour during burning hasn’t been handled properly with the flame retardants. In this work, fluoropolymer was blended with both pure PET (pPET) and reactive phosphorus-containing flame retarded copolyester (fPET), and the flame retardance and char formation and mechanical properties of the resulted pPET and fPET blends were investigated. The tensile strengths of modified pPET samples were worsen whereas those of modified fPET samples were improved at low concentrations. The initial thermal degradation in nitrogen was accelerated remarkably for the two polyesters with fluoropolymer. The oxygen indices of the all modified samples were reduced while char formation and meltdripping suppression were encouraged. The apparent melt viscosity and elasticity for the two polyesters were gained much with antidripping agent. Therefore, fluoropolymer improved char formation of the two polyesters based on the gaseous phase mechanism while the partial suppression of meltdripping behavior and the decrease of mechanical properties mainly originated from the increase of melt viscosity via fibrillation for pPET.