Influence of 2,6 (N-pyrazolyl)isonicotinic acid on the photovoltaic properties of a dye-sensitized solar cell fabricated using poly(vinylidene fluoride) blended with poly(ethylene oxide) polymer electrolyte

A novel method of introducing a synthesized organic nitrogenous compound 2,6 (N-pyrazolyl)isonicotinic acid (BNIN) and its effect on the conduction behavior of poly(vinylidene fluoride) (PVdF)–poly(ethylene oxide) (PEO) polymer-blend electrolyte with potassium iodide (KI) and iodine (I₂) and the corresponding performance of the dye-sensitized solar cells (DSSCs) were studied. A systematic investigation of the blends using FTIR provides evidence of interaction of BNIN with the polymer. Differential scanning calorimetry (DSC) study proves the miscibility of these polymers. Due to the coordinating and plasticizing effects of BNIN, the ionic conductivity of polymer blend electrolytes is enhanced. The efficiency of DSSC using BNIN doped polymer blend electrolyte was 7.3% under an illumination of 60 mW cm⁻² were observed for the best performance of a solar cell in this work.     

Electrocatalytic and simultaneous determination of isoproterenol, uric acid and folic acid at molybdenum (VI) complex-carbon nanotube paste electrode

This paper describes the development, electrochemical characterization and utilization of a novel modified molybdenum (VI) complex-carbon nanotube paste electrode for the electrocatalytic determination of isoproterenol (IP). The electrochemical profile of the proposed modified electrode was analyzed by cyclic voltammetry (CV) that showed a shift of the oxidation peak potential of IP at 175 mV to less positive value, compared with an unmodified carbon paste electrode. Differential pulse voltammetry (DPV) in 0.1 M phosphate buffer solution (PBS) at pH 7.0 was performed to determine IP in the range from 0.7 to 600.0 μM, with a detection limit of 35.0 nM. Then the modified electrode was used to determine IP in an excess of uric acid (UA) and folic acid (FA) by DPV. Finally, this method was used for the determination of IP in some real samples.     

Ferroceneboronic acid for the electrochemical probing of interactions involving sugars

Ferroceneboronic acid (FcBA) was used as a redox-active probe suitable for monitoring of diol–boronate interactions. Voltammetric and amperometric measurements allowed to detect FcBA forms – free and bound in the boronate complex. In this way, the complexation interaction was studied for a set of saccharide molecules as model diols and the corresponding affinity equilibrium constants were determined. A shift of the peak potential on voltammograms accompanying formation of the boronate complex with FcBA was proposed as a probe for electrochemical characterization of surface-confined diol-containing structures. The model experiments were carried out using sorbitol- and 1,6-hexandiol-modified polyepichlorhydrin conjugates deposited on the electrodes; the former compound was able to form the boronate complex while no change of the peak potential for the latter conjugate was observed. This approach seems promising for artificial bioelectronic affinity receptors and technology of reagentless biosensors where the binding interaction directly stimulates a measurable electrochemical event.     

Oleic acid esterification with ethanol under continuous water removal conditions

The production of ethyl ester was investigated using a new reaction system consisting of a reactor coupled to an adsorption column. The adsorption system was used to shift the equilibrium toward ethyl ester production by removing the water from commercial ethanol and the water produced during the esterification reaction. A condenser placed above the adsorption column was responsible to condensate the vapor, returning water free ethanol to the reactor. Ethyl ester was produced by esterification of oleic acid and ethanol using sulfuric acid as catalyst. The results showed a yield of 99.9%. The best operating condition was found operating the reactor at 110 °C, 1% of catalyst (w/w) and with an oleic acid to ethanol ratio of 1:3.     

Morphological and separation performance study of polysulfone/titanium dioxide (PSF/TiO2) ultrafiltration membranes for humic acid removal

In this study, polysulfone (PSF) hollow fiber membranes with enhanced performance for humic acid removal were prepared from a dope solution containing PSF/DMAc/PVP/TiO₂. The main reason for adding titanium oxide during dope solution preparation was to enhance the antifouling properties of membranes prepared. In the spinning process, air gap distance was varied in order to produce different properties of the hollow fiber membranes. Characterizations were conducted to determine membrane properties such as pure water flux, molecular weight cut off (MWCO), humic acid (HA) rejection and resistance to fouling tendency. The results indicated that the pure water flux and MWCO of membranes increased with an increase in air gap distance while HA retention decreased significantly with increasing air gap. Due to this, it is found that the PSF/TiO₂ membrane spun at zero air gap was the best amongst the membranes produced and demonstrated > 90% HA rejection. Analytical results from FESEM and AFM also provided supporting evidence to the experimental results obtained. Based on the anti-fouling performance investigation, it was found that membranes with the addition of TiO₂ were excellent in mitigating fouling particularly in reducing the fouling resistances due to concentration polarization, cake layer formation and absorption.     

Au nanoparticle–polyaniline nanocomposite layers obtained through layer-by-layer adsorption for the simultaneous determination of dopamine and uric acid

The layer-by-layer adsorption technique was used to prepare polyaniline (PANI)–gold nanoparticles (AuNP) multilayered structures with different AuNP/PANI ratios. By means of microgravimetric measurements it was found that the amount of the adsorbed species depends on the duration of the AuNP adsorption step. At fixed adsorption step durations the amount of both (PANI and AuNP) materials increases linearly with the number of adsorption steps.Two types of PANI–AuNP multilayered nanocomposites with different AuNP/PANI ratio were studied as electrocatalytic materials for dopamine and uric acid oxidation. The sensitivity of PANI–AuNP for dopamine oxidation was found to depend on type of the nanocomposite whereas for uric acid oxidation the sensitivity remained unaffected by the type of the nanocomposite structure. This result is discussed in terms of the different limitations for both oxidation reactions. By means of differential pulse voltammetry experiments linear concentration dependences of the anodic peak currents were observed for both dopamine and uric acid in the concentration ranges 7–148 μmol dm⁻³ and 29–720 μmol dm⁻³, respectively. In the presence of both analytes no interference effects were detected.     

Selective determination of ascorbic acid with a novel hybrid material based 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid and the Dawson type ion [P2Mo18O62] immobilized on glassy carbon

In this study, we synthesized a new hybrid material using well-Dawson K₆[P₂Mo₁₈O₆₂]·nH₂O and a room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]). CHN elemental analysis showed that one mole of [P₂Mo₁₈O₆₂]⁶⁻ reacts with 6 moles of [BMIM]⁺ to form [BMIM]₆P₂Mo₁₈O₆₂. FT-IR spectra showed the presence of both 1-butyl-3-methylimidazolium cation and the Dawson anion. TG analysis displayed a relative thermal stability of the hybrid material compared to the parent Dawson POM. The new hybrid material [BMIM]₆P₂Mo₁₈O₆₂ was immobilized on glassy carbon (GC) electrode and the modified electrode was investigated by cyclic voltammetry and amperometry. Compared to the electrochemical behavior of dissolved [P₂Mo₁₈O₆₂]⁶⁻, a slight shift in the redox peaks towards negative potentials is observed for the immobilized [BMIM]₆P₂Mo₁₈O₆₂. The relationship between the peak currents of the deposited [BMIM]₆P₂Mo₁₈O₆₂ film and scan rate is shown to be linear, which demonstrates a surface-confined electron transfer processes. [BMIM]₆P₂Mo₁₈O₆₂ modified electrode showed high sensitivities towards pH and shown to be active even at neutral pH. [BMIM]₆P₂Mo₁₈O₆₂ modified GC electrode was subjected to cyclic voltammetry and amperometry in the presence of ascorbic acid (AA) and found to exhibit a remarkable catalytic activity towards the oxidation of AA. The catalytic oxidation peak of AA at [BMIM]₆P₂Mo₁₈O₆₂ modified GC electrode occurs at low potential of ∼0 V vs Ag/AgCl at neutral pH and shifts to more positive potentials when pH decreases. Comparison between [BMIM]₆P₂Mo₁₈O₆₂ and [P₂Mo₁₈O₆₂]⁶⁻ modified GC films towards the oxidation of AA suggests that the significant decrease in the overpotentials recorded with [BMIM]₆P₂Mo₁₈O₆₂ film is related to the presence of ionic liquid cation in the hybrid material, which probably plays the role of the redox mediator. The resulting AA sensor [BMIM]₆P₂Mo₁₈O₆₂/GC has a significant sensitivity of ∼63 nA/μM AA, fast response time (<9 s), low detection limit (<0.1 μM), high selectivity towards endogenous interferences such as uric acid, acetaminophen and dopamine, a linear range from 0.1 μM to at least 22 mM AA and was stable for at least 2 weeks. In addition, such AA sensors can operate in a pH range from 0 to at least 7.     

Porphyrin-functionalized gold nanoparticles for selective electrochemical detection of peroxyacetic acid

Two layers of cationic iron(III) meso-tetrakis (N-methylpyridinum-4-yl)porphyrin (FeTMPyP) and anionic gold nanoparticles (GNPs) were alternately assembled on a poly(diallyldimethylammonium chloride)-wrapped carbon nanotube (PDDA-CNT)-modified electrode via electrostatic interactions. The porphyrin-functionalized gold nanoparticles were characterized by scanning electron microscopy and UV–vis absorption spectrometry. The (FeTMPyP–GNP)₂/PDDA-CNT modified electrode showed two stable and well-defined peaks at −0.112 V and −0.154 V, which were attributed to the GNP-accelerated redox process of Fe(III)TMPyP/Fe(II)TMPyP. The modified electrode possessed excellent electrocatalytic behavior for the reduction of peroxyacetic acid (PAA). The resulting biosensor exhibited a fast amperometric response to PAA (∼3 s), with a wide linear range from 2.5 × 10⁻⁶ M to 1.05 × 10⁻³ M and a detection limit of 0.5 μM at a signal-to-noise ratio of 3. More importantly, H₂O₂ did not interfere with the detection. Thus, this biosensor enabled highly sensitive detection of PAA without removing H₂O₂ and showed a promising potential in practical applications.     

Enhanced electrochemical reduction of hydrogen peroxide on silver paste electrodes modified with surfactant and salt

The modification of silver paste electrodes with a combination of dodecylbenzenesulfonic acid and KCl has been shown to lead to significant enhancements of the electrochemical reduction of hydrogen peroxide. The catalytic enhancement was shown to be dependent on the concentration of the surfactant/salt solution, which resulted in increases of some 80-fold in amperometric response to hydrogen peroxide at −0.1 V vs Ag/AgCl, pH 6.8 over unmodified silver paste. Physical analysis showed modifications to both the surface morphology and chemical composition of the silver paste electrode surface. However, BET and electrochemical analysis revealed no significant change in surface area. It is suggested that the enhanced catalysis may result from the formation of stabilised surfactant/salt structures at the metal electrode surface. The electrode was also shown to be suitable for the amperometric detection of hydrogen peroxide with a limit of detection of 1.1 × 10⁻⁶ M (S/N = 3).     

Effect of Nafion ionomer and catalyst in cathode layers for the direct formic acid fuel cell with complex capacitance analysis on the ionic resistance

Using platinum (Pt) black and carbon-supported Pt (Pt/C) as cathode catalysts, membrane-electrode assemblies (MEAs) were fabricated with various Nafion ionomer content, and their direct formic acid fuel cell (DFAFC) performances were investigated. In MEAs incorporating Pt black catalysts, the current density at 0.6 V was highest at ionomer/catalyst volume ratio of 1.0, which was consistent with the electrochemical active area (EAS) variation measured by cyclic voltammetry. However, the current density measured at 0.3 V, the cell performance increased with Nafion ionomer content, especially at low ionomer loading, indicating that proton transport rate played an important role. The variation in ionic resistance (R_ion) of cathode layers with Nafion ionomer content was experimentally confirmed by using the complex capacitance analysis of impedance data implemented with nitrogen (cathodes)/hydrogen (anodes) atmosphere. For Pt/C, the layer thickness and EAS of cathode were larger than those of MEA cathode using Pt black; and the current densities at 0.6 V were lower than those of Pt black, suggesting that smaller fraction of EAS was utilized.