Analysis of trace mercury in water by solid phase extraction using dithizone modified nanometer titanium dioxide and cold vapor atomic absorption spectrometry

A new method for analysis of trace mercury in water samples was developed, based on the combination of preconcentration/separation using dithizone-modified nanometer titanium dioxide (TiO2) as a solid phase extractant and determination by cold vapor atomic adsorption spectrometry (CVAAS). Dithizone was dissolved with alcohol and loaded on the surface of nano-sized TiO2 powders by stirring. The static adsorption behavior of Hg2 on the dithizone-modified nanoparticles was investigated in detail. It was found that excellent adsorption ratio for Hg2 could be obtained in the pH range of 7-8 with an oscillation time of 15 min, and a 5 mL of 3.5 mol·L-1 HCl solution could quantitatively elute Hg2 from nanometer TiO2 powder. Common coexisting ions caused no obvious influence on the determination of mercury. The mechanisms for the adsorption and desorption were discussed. The detection limit (3σ) for Hg2 was calculated to be 5 ng·L-1. The proposed method was applied to the determination of Hg2 in a mineral water sample and a Zhujiang River water sample. By the standard addition method, the average recoveries were found to be 94.4%-108.3% with RSD (n = 5) of 2.9%-3.5%.     

雷达目标特征提取的一种方法

将小波变换和马氏距离相结合，提出了一种基于ISAR成像的雷达目标特征提取方法。对ISAR成像数据进行正交二进Symlet小波分解和门限处理，对数据进行压缩，然后计算压缩后坐标点的马氏（Mahalanobis)距离，得到目标稳定的特征向量。由实验结果看出，此向量具有在一定范围内的不变性，能够用于雷达目标识别。     

离子液体用于燃料油深度脱硫的研究进展

首先介绍了加氢催化脱硫和其他脱硫技术的特点,综述了近年来国内外利用离子液体在萃取脱硫、萃取脱硫与氧化脱硫耦合、萃取脱硫与生物脱硫耦合等方面的研究。认为离子液体萃取脱硫具有操作简便、可循环使用、无需氢气、环境友好、能深度脱硫等特点,是一项具有广阔发展前景的技术。若要实现该技术的工业化应用,还需进一步加强离子液体在合成工艺、脱硫选择性及回收再生等方面的研究。     

Mass transfer kinetics of neodymium(III) extraction by calix[4]arene carboxylic acid using a constant interfacial area cell with laminar flow

BACKGROUND: Thermodynamics and kinetics data are both important to explain the extraction property. In order to develop a novel separation technology superior to current extraction systems, many promising extractants have been developed including calixarene carboxylic acids. The extraction thermodynamics behavior of calix[4]arene carboxylic acids has been reported extensively. In this study, the mass transfer kinetics of neodymium(III) and the interfacial behavior of calix[4]arene carboxylic acid were investigated. RESULTS: The rate constant (K_ao) becomes constant when the stirring speed was controlled between 250 rpm and 400 rpm. The activation energy (E_a) was calculated to be 21·41 kJ mol^?1 or 88·17 kJ mol^?1 (dependent on temperature) from the slope of log K_ao against 1000/T. The linear relationship between the specific area and the extraction rate is the characteristic of an interfacial reaction control. The minimum bulk concentration of the extractant necessary to saturate the interface (C_min) is lower than 4·19 × 10^?4 mol L^?1. CONCLUSION: The effect of stirring speed, temperature, and species concentration on the extraction rate demonstrates that the extraction regime depends on the extraction conditions. The chemical reaction control governs the extraction regime at temperatures below 303 K and a mixed control regime occurs when the temperature is between 303 K and 318 K. The probable locale for the chemical reaction is at the liquid–liquid interface and the rate equation is deduced to be: ? d[Nd³⁺]_(a)/dt = k_f[Nd³⁺]_(a)[H₄A]_(o)^0·727[H⁺]_(a)^?0·978. The rate‐controlling step was suggested by the analysis of the experimental results. Copyright © 2008 Society of Chemical Industry     

调节剂对烷基水杨醛肟萃取铜铁的影响

烷基水杨醛肟虽然是一种高选择性的铜萃取剂，但单独使用时，萃取相易出现沉淀；反萃时，再生有机相出现乳化物，而且两相分离时间较长．将月桂醇、仲辛醇、壬基酚三种调节剂分别加入到萃取剂中，研究其对烷基水杨醛肟萃取及反萃行为的影响．结果表明，三种调节剂均可以解决上述问题，只是使萃取能力略有降低；壬基酚加入到烷基水杨醛肟中有助于提高铜铁分离系数，可达647．     

从水淬渣中回收镓的试验研究

对鼓风炉（ISP法）或烟化炉水淬渣中回收镓的工艺进行了研究。结果表明，利用浓硫酸恒温熟化的独特浸出工艺，克服硅对液固分离的影响；以伯胺N9123作为萃取剂在硫酸介质中萃取镓；获得了含镓品位为2.82%的富集物。     

钽铌水冶分解提取工艺及设备的进展

介绍了近些年来我国钽铌湿法冶炼中的资源结构，氢氟酸分解、矿浆萃取工艺以及工艺设备的进展情况。比较了主要工艺过程的技术经济指标，指出了当前生产中存在的一些问题，并提出了解决问题的一些意见。     

裂解碳五馏分分离中取代二萃单元的研究

针对目前裂解碳五馏分分离流程中第二萃取单元的诸多问题,提出采用选择性加氢除去炔烃后再进行精馏的方法代替二萃单元,得到聚合级异戊二烯产品。研究结果表明,工艺流程的改进部分是可行的,具有流程短、安全可靠、能耗低、生产成本低、环境污染少、简化溶剂回收单元等优点。     

油田采出水的高温水解-好氧处理工艺研究

根据油田采出水的水质特征，采用厌氧(水解)-好氧(接触氧化)处理工艺。实验表明，虽然油田采出水的BOD5／CODCr，较低，属于难生物降解废水，但是当温度为50～60℃时，选择厌氧停留时间为6h，好氧停留时间为3．5h，气水比为10～20，可使其出水的CODCr稳定在120mg／L左右。如果排除Cl^-产生的影响，CODCr，约为60～70mg／L，达到GB8978-1996一级排放标准。     

基于单元规则度信息的提取和实现的Data-Path布局算法

提出了一种有效的Data-Path布局算法DPP,该算法基于一个新的"不规则度"概念来评价电路单元之间连接关系的规则性信息,并根据这些规则性信息提取规则化的单元形成规则矩阵;然后算法把规则矩阵转化为二次布局的约束条件进行最终的布局.与Cadence公司布图工具SE的对比实验表明,DPP是一种有效地针对Data-Path子电路的布局算法,它在时延平衡方面可以得到非常满意的结果.