水乳剂用壬基酚聚氧乙烯配磷酸酯的合成

以壬基酚聚氧乙烯醚(TX-10)、P2O5为原料,合成了水乳剂壬基酚聚氧乙烯醚磷酸酯。通过对还原剂用量等因素的讨论,确定最佳工艺条件为:次亚磷酸钠用量为TX-10的0.4%,n(TX-10)∶n(P2O5)∶n(H2O)=2∶1∶0.8,反应温度60℃,反应时间5h。在此条件下产品的酯化率为96.84%。     

丙烯酸酯类共聚物乳液的研究进展

聚丙烯酸酯乳液是一大类容易制备、性能忧良、应用广泛且符合环保要求的聚合物乳液。本文系统地讨论了丙烯酸酯类共聚物乳液合成的配方设计，如单体、引发剂、乳化剂、PH调节剂、链转移剂以及保护胶体等微量组份的性质、在制备过程中所起的作用以及对制备所得共聚物乳液结果的影响；阐述了核壳乳液聚合、无皂乳液聚合、有机—无机复合乳液聚合、基团转移聚合、互穿网络聚合以及微乳液聚合与超微乳聚合等新型丙烯酸酯类共聚物乳液聚合技术；并简要介绍了丙烯酸酯类共聚物乳液在建筑涂料及胶粘剂领域的应用。     

Concentrated emulsion polymerization for preparation of β‐cyclodextrin‐supported chromatography columns

Concentrated inverse emulsion polymerization was used for making chromatography columns (based on crosslinked polystyrene divinylbenzene (PS‐DVB)) with pore sizes less than 10 μm. According to DSC‐thermal gravimetry thermograms, it was confirmed that the residual monomer concentration after polymerization process is negligible. For application of these columns in chiral chromatography, the β‐cyclodextrin is chemically fixed on the PS‐DVB resin pore surface. The presence of hydroxyl groups in the PS‐DVB resin after chemical modification was confirmed by FTIR spectroscopy. By chemical modification of the PS‐DVB resin, thermal stability increased up to 446°C. The structure of columns was analyzed by scanning electron microscopy (SEM). SEM evaluations showed that the porous structure of PS‐DVB resin was maintained intact after the chemical modification with β‐cyclodextrin. According to X‐ray data, presence of the crystalline domain that is related to β‐cyclodextrin is confirmed.© 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 857–863, 2006     

α─甲基苯乙烯和丙烯腈乳液共聚研究

本文用α─甲基苯乙烯（α—ＭＳ）和丙烯腈（ＡＮ）为主要原料，用乳液聚合技术合成了α—ＭＳ—ＡＮ共聚物．主要研究了乳化剂种类和用量、引发剂用量、单体的不同加料方式和配比对聚合的影响．同时考察了单体的不同配比对共聚物性能的影响．并通过ＩＲ等手段对共聚物进行了表征，最终得到了令人满意的α—ＭＳ—ＡＮ共聚物。     

新型可聚合乳化剂及其在乳液聚合中应用

综述了可聚合乳化剂的分类、性能与应用,比较了可聚合乳化剂与传统乳化剂在乳液聚合中的优缺点,讨论了可聚合乳化剂的溶液性能,指出了可聚合乳化剂的发展趋势。     

伊朗轻质原油减渣馏分油水界面张力的研究

The vacuum residual from Iranian Light crude oil are separated into a series of 16 narrow fractions according to the molecular weight by the supercritical fluid extraction and fractional (SFEF) technology. The chemical element and the UV spectrum of each fraction are analyzed. The effects of several factors on the interfacial tension are investigated, which are the fraction concentration in oil phase, the ratio of oil component, the salts dissolved in the water phase and the pH value. The interfacial tension decreases rapidly as the concentration of the residual fraction in the oil increases, showing a higher interfacial activity of the fraction. The interfacial tension changes, as the amount of absorption or the state of the fractions in the interface changes resulting from different ratios of oil, different kinds or concentrations of salts in water, and different pH values. It is concluded that the intrfacial tension changes regularly, corresponding to the regular molecular parameters of the vacuum residual fractions.     

有机硅乳液中挥发性物质的测定

根据固相微萃取原理,对萃取条件进行了优化。优化后的HS-SPME-GC-MS(顶空固相微萃取/气相/质谱)实验条件为:采用85μm PAA纤维萃取头,萃取时间30min,萃取温度室温,解吸时间5min。在此条件下对3种有机硅乳液进行分析,通过计算机数据系统(质谱数据库NIST和Willy)检索及人工谱图解析,鉴定了非硅油挥发性成分。该方法的相对标准偏差为0·57%~2·59%。     

Studies on grafting of acrylic acid onto polypropylene melt‐blown nonwovens induced by electron‐beam preirradiation

We report the graft copolymerization of acrylic acid onto the polypropylene (PP) melt‐blown nonwovens induced by electron beam (EB) preirradiation in this article. The occurrence of the graft copolymerization was confirmed by means of XPS, FTIR, and SEM. The effects of preirradiation dose, monomer concentration, bath ratio, reaction time, and temperature on the graft ratio were investigated. The water conservation, water absorption rate, and K⁺ exchange capacity were also determined on the grafted PP melt‐blown nonwovens, which showed that EB preirradiation‐induced grafting was an effective way to improve the hydrophicility of PP melt‐blown nonwovens. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4971–4977, 2006     

丙烯酸高级酯共聚物组成与其无皂乳液稳定性研究

制备了不同分子结构的丙烯酸高级酯共聚物无皂乳液,测定了丙烯酸和甲基丙烯酸十六酯的竟聚率,考察了共聚物的组成对无皂乳液电解质稳定性、机械稳定性和pH值稳定性的影响。结果显示,丙烯酸竟聚率为2.32,甲基丙烯酸十六酯竟聚率为0.59,随共聚物中丙烯酸组分含量增加,乳液粒子表面羧基含量增大,乳液机械稳定性和pH值稳定性提高,乳液适合在偏碱性条件下使用。     

丙烯酰胺与2-丙烯酰胺基-2-甲基丙磺酸反相乳液聚合的研究

采用Span-80为乳化剂，白油为分散介质，（NH4）2S2O8-Na2SO3为引发剂，研究了丙烯酰胺（AM）与2-丙烯酰胺基-2-甲基丙磺酸（AMPS）的反相乳液共聚反应，合成出了高相对分子质量的共聚物。讨论了引发剂用量、乳化剂用量、水油比、单体浓度等因素对共聚物相对分子质量的影响。引发剂用量为单体质量的0．2‰，乳化剂为油相的6．7％，水油比为1：1．5，单体浓度为37．5％时可获得高相对分子质量的共聚物，且聚合反应平稳易控制。