Novel approach in investigation of the poly(acrylic acid) hydrogel swelling kinetics in water

The swelling kinetics curves of structurally defined poly(acrylic acid) hydrogel in bidistilled water at temperatures: 25, 30, 35, 40, and 45°C were determined. The possibility of kinetically explaining the isothermal swelling process by applying the following models: reaction controlled by diffusion, first order chemical reaction kinetics, and second order chemical reaction kinetics, was investigated. It was found that kinetically explaining the swelling process using these methods was limited to only certain parts of the process. The swelling process in bidistilled water was described in full range assuming that the hydrogel's swelling rate was a kinetically controlled reaction by the rate of the movement of reactive interface of hydrogel. Based on that model, the kinetic parameters, activation energy (E_a) and preexponential factor (A), of the swelling process were determined to be E_a = 35 kJ/mol and lnA = 8.6. A possible mechanism of the investigated swelling process was discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

聚丙烯酸酯防水乳液的研究进展

综述了聚丙烯酸酯防水乳液的理论研究进展，重点评述了组合功能单体、优选乳化体系和进行粒子设计三方面的改性手段。     

Synthesis and properties of PDMS modified waterborne polyurethane–acrylic hybrid emulsion by solvent-free method

A new type of polysiloxane modified polyurethane–acrylic hybrid emulsion was synthesized by solvent-free method and the polysiloxane was introduced into the soft segment of polyurethane chains using dihydroxybutyl-terminated polydimethylsiloxane (PDMS). The formed film from the hybrid emulsion could provide obviously higher water-resistance property. The preparation technologies such as the content of carboxy group and acrylic monomer, the rate and the time of emulsification were discussed systematically. The chain structure and the particle size were confirmed by the analysis of Fourier transform infrared spectroscopy and transmission electron microscopy, respectively. The effect of PDMS content on the water resistance and the mechanical property were investigated by absorbed water ratio, water contact angle and dynamic mechanical measurement.     

原油破乳脱钙复合剂的研制

介绍了原油破乳脱钙复合剂的筛选方法。所用的破乳剂有PY、UD 10、2 0 40、SDX、SL、硬脂酸 三乙醇胺 ,所用的脱钙剂有KL 1、KL 2、KL 3、KL 4、YH、EA、SJ、LP。首先将一定量的破乳剂与原油混合 ,振荡、静置 ,按油水分层情况及脱水率 ,筛选出较优的破乳剂。然后 ,在已加入破乳剂的原油中加入一定量的脱钙剂水溶液 ,振荡、静置 ,用燃烧瓶法处理油样 ,用原子吸收分光光度计测其钙含量 ,并与未经处理的原油对比。根据脱钙率 ,筛选出较优的脱钙剂。经过对破乳剂和脱钙剂的种类、用量、pH值等条件的选择 ,配出了针对俄罗斯原油、布伦特原油、扎非罗原油破乳、脱钙效果最好的复合剂PY YH、PY EA ,其脱钙率大于 80 %,脱水率大于98%,可直接用于炼厂的原油破乳脱钙工艺中。     

乳化炸药的乳化物理模型和理想乳化模态

文章以平推流模拟了乳化炸药乳胶质的形成过程,并建立了机械强制乳化的物理模型及理想模态。     

新型聚丙烯酸(934P、980)树脂的制备

详细研究了以乙酸乙酯和环己烷为溶剂，丙烯酸为单体，BPO，LPO，AIBN为引发剂，聚烯基多醚为交联剂，合成增稠能力强、透明度高的聚丙烯酸树脂。于混和溶剂存在下制得的聚合物，消除了以往由二氯甲烷为溶剂的反应介质中所得产品的毒性，可广泛应用于医药及日用化工等行业。     

光面爆破专用炸药的研究

文章分析了光爆炸药的性能特点，提出了制造光爆炸药新方法。该炸药密度（０．３５、０．７０ｇ／ｃｍ￣３）与爆速（１３００、２２００ｍ／ｓ）可调，贮存性能稳定；爆轰感度好，能满足不同硬度岩石尤其是软岩的光爆需要。     

Influence of Two Salicylate Components on the Particle Size of an Oil-in-Water Emulsion with Nonionic Surfactants

This paper reports a study undertaken using techniques of static and dynamic light scattering to investigate the influence of sodium salicylate and methyl salicylate on droplet size of oil-in-water emulsions. The rates of changes were measured by determining the size and distribution of the oil droplet in the material. All emulsions showed a bimodal size distribution; the mean diameters and polydispersity were calculated from intensity. These data were analyzed with nonlinear regressions and bootstrap methodology. An amount of methyl salicylate component induced a decrease of mean diameter and standard deviation. On the contrary, sodium salicylate entailed the growth of all droplet populations and coalescence for the highest concentration.     

水溶性聚偶氮酯的研究

用Ｐｉｎｎｅｒ合成方法制备了用ＰＥＧ４００封端的水溶性聚偶氮酯，并表征了其结构；研究了热分解反应动力学及用于乳液聚合的动力学。结果表明，该种引发剂具有引发速度快、热分解机理简单和具有辅助乳化作用等优点。     

水溶性丙烯酸共聚物对羊毛织物抗缩性能的研究

本文对水溶性丙烯酸共聚物的合成，以及其对羊毛织物的抗缩性能的影响作了较详细的研究和讨论。