稀土复合热稳定剂对聚氯乙烯性能影响研究

主要以有机锡热稳定剂为对比物，研究了稀土热稳定剂对聚氯乙烯(PVC)的热稳定性及其他性能的影响。稀土热稳定剂对PVC的力学性能、加工性能都有不同程度的提高，稀土热稳定剂的热稳定性能符合PVC的加工条件要求，并研究了抗冲改性剂ACR(丙烯酸酯共聚物)对体系的影响。     

聚硅氧烷-丙烯酸酯共聚物互改性产物的表面特性

通过测定参照液体在固体表面的接触角，计算固体的表面能及固体／液体接触体系的粘附功，考查了聚硅氧烷-丙烯酸酯共聚物互改性产物的表面特性及其对粘接性能影响。     

High solids content emulsions. III. Synthesis of concentrated latices by classic emulsion polymerization

Two different methods of producing bi‐ and trimodal latices of a mixture of methyl methacrylate, butyl acrylate, and small amounts of acrylic acid were tested. It is shown that a combination of concentrating blends of seed particles by semibatch reaction, followed by a nucleation of small particles plus a second semibatch phase allowed us to obtain stable latices with solids contents over 65% and viscosities of below 2500 mPa s^?1 with little coagulum formation. The key parameter in determining latex stability, coagulum formation, and viscosity appears to be the the particle size distribution, and especially its modification attributed to secondary nucleation. Because it is not possible to eliminate water‐soluble monomers from the polymerization recipe, secondary (homogeneous) nucleation must be minimized by careful addition of the free‐radical initiator and choice of monomer feed flow rates. The nucleation of the third population in the trimodal latices is best accomplished with a mixed surfactant system because renucleation by anionic surfactant alone leads to detrimental changes in the particle size distribution (PSD) resulting from excessive flocculation of particles. In addition, it was found that the viscosity of the final products was not sensitive to small changes in the ionic strength of the latex, although neutralization to a pH of 6 effectively doubles the final latex viscosity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1916–1934, 2002; DOI 10.1002/app.10513     

原位聚合法研制纳米胶囊相变材料

采用超声波工艺及细乳液原位聚合方法,研制了以聚苯乙烯为囊壁、正十八烷为囊芯的纳米胶囊相变材料;系统探讨了聚合反应各因素如引发剂、链转移剂、表面活性剂以及正十八烷/苯乙烯比等对乳胶粒子的形态、胶囊材料热性能的影响,对所研制的胶囊相变材料进行激光衍射粒度分析、透射电镜及差示扫描量热等表征.实验结果表明,在引发剂AIBN 0.5%(油相质量百分比,下同);链转移荆DD在T0.4%;复合乳化剂(SDS/OP10)总量2%,配比1:1及正十八烷/苯乙烯比=1:1条件下,胶囊呈球形均匀分布,聚苯乙烯囊壁能将正十八烷囊芯很好包裹住,其胶囊Z均直径124nm,相变焓可达124.4kJ·kg-1.     

槽液稳定性好的高硬度丙烯酸阳极电泳涂料的研制

在混合溶剂中加入甲基丙烯酸、各种甲基丙烯酸酯单体以及引发剂AIBN和链转移剂DDM,在85℃下反应合成了丙烯酸树脂。分别研究了不同酸值和羟值的丙烯酸单体、不同Tg的丙烯酸树脂以及各种助溶剂和中和剂对漆膜性能的影响。获得了丙烯酸阳极电泳涂料的最佳配方:丙烯酸共聚树脂的酸值为65 mg KOH/g、羟值为69 mg KOH/g、Tg为20℃,溶剂是体积比为1∶1的丙二醇单甲醚和异丙醇的混合物,中和剂是二乙醇胺。该电泳涂料具有良好的槽液稳定性和起泡消泡性。制得的涂膜外观平整、丰满、光亮,厚度为18~20μm,硬度为5 H,冲击强度为500 N/cm2,附着力为1级,柔韧性为1 mm,耐烟雾实验超过400 h。     

双组分高固体丙烯酸聚氨酯涂料的研究

介绍了改性高固体分羟基丙烯酸树脂的合成工艺，通过对引发剂、链转移剂、反应温度及叔碳酸缩水时油酯等因素的讨论，合成了新型的羟基丙烯酸树脂。以其为基料配制了丙烯酸聚氨酯涂料，并讨论了该磁漆的配方设计和各项性能。     

淀粉丙烯酸接枝共聚吸水性树脂的研究进展

基于淀粉丙烯酸接枝共聚作为吸水性树脂具有环保和可生物降解的优良特性 ,目前 ,人们普遍关注的是如何提高其吸水性 ,抗温性 ,控制水份释放 ,压力下保水 ,以及电解液的吸收等。这些特性的改进将使产品的用途更为广泛 ,可以预见 ,淀粉丙烯酸接枝共聚作为吸水性树脂具有广阔的应用和发展前景。     

Continuous emulsion polymerization of vinyl acetate. II Operation in a single Couette–Taylor vortex flow reactor using sodium lauryl sulfate as emulsifier

Continuous emulsion polymerizations of vinyl acetate were conducted at 50°C in a single continuous Couette–Taylor vortex flow reactor (CCTVFR) using sodium lauryl sulfate as emulsifier and potassium persulfate as initiator. The polymerization can be carried out very smoothly and stably, but the steady‐state monomer conversion attained in a CCTVFR is not as high as that in a plug flow reactor (PFR), but only slightly higher than that in a continuous stirred tank reactor (CSTR), even if the Taylor number is adjusted to an optimum value. Also, the effects of operating variables, such as the emulsifier, initiator, and monomer concentrations in the feed and the mean residence time on the kinetic behaviors were almost the same as those observed in a CSTR. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2755–2762, 2002     

非离子型聚氨酯预聚体可聚合乳化剂的合成及性能

采用甲苯二异氰酸酯 (TDI) ,聚乙二醇 10 0 0 (PEG -10 0 0 ) ,丙烯酸为原料 ,通过分子设计合成了带有双键的非离子型可聚合乳化剂。并对其CMC值、流变行为及乳化力进行了表征。结果显示 :此乳化剂的CMC值在 6.0 %左右、浊点为 (54± 1)℃、HLB值为 16.1可以取代OP -10的乳化能力 ;该乳化剂可以与丙烯酸酯类单体进行乳液共聚 ,得到性能优异的共聚乳液     

OP-1O丙烯酸酯的合成及其乳化特性的研究

本文对OP－10丙烯酸酯非离子反应性乳化剂的合成方法进行了研究，并对合成乳化剂的各种乳化剂性能进行了测试。经过测试和聚合实验表明，在本实验条件下，OP－10与丙烯酸可以有效地进行酯化反应，合成的OP－10丙烯酸酯有较好的聚合与乳化特性。