Isotherm analyses for single component and multi-component metal sorption onto lignite

The adsorption of the three metal ions, copper, cadmium and zinc in single component and multi-component mixtures in aqueous solutions by lignite is reported. A comparison is made between the single component saturation uptake and the multi-component uptakes. The isotherms indicate a competitive uptake with copper being preferentially absorbed by the lignite in multi-component solutions. The isotherms are plotted to obtain the Langmuir constants, the Freundlich constants and the Redlich–Peterson constants. Lignite is shown to possess an affinity for the metal ions which make its use as an adsorbent a possible alternative to the use of more expensive activated carbons.     

Preparation of an anion‐exchange adsorbent by the radiation‐induced grafting of vinylbenzyltrimethylammonium chloride onto cotton cellulose and its application for protein adsorption

Poly(vinylbenzyltrimethylammonium chloride)‐graft‐cotton cellulose, an anion‐exchange matrix, was synthesized by a mutual radiation‐induced grafting technique with a ⁶⁰Co γ‐radiation source. The grafted matrix was characterized by grafting yield estimation, elemental analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. The grafting yield decreased with the increase in the dose rate. However, the grafting yield and nitrogen content of grafted samples increased almost linearly with an increase in the total irradiation dose. To evaluate the performance of the grafted anion‐exchange matrix, the protein adsorption and elution behavior were investigated in a continuous column process under various experimental conditions, with bovine serum albumin used as a model protein. The binding and elution behavior of the anion‐exchange matrix depended on different experimental parameters, such as the grafting yield, ionic strength, pH of the medium, and amount of protein loaded. From a breakthrough curve, the equilibrium binding capacity and elution percentage of the grafted anion‐exchange matrix were estimated to be 40 mg/g and 94%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5512–5521, 2006     

乙苯/苯乙烯塔分离效率问题的技术分析及整改措施

分析了齐鲁分公司200kt/a乙苯/苯乙烯装置乙苯/苯乙烯塔(T-401)分离效率低的原因,即降液管设计偏小,液体在降液管内流速过快,引起液体飞溅;安装分布器使用的石棉垫片溶胀而粉碎后堵塞了分布槽;分布器上使用的垫片脱落形成缝隙而漏液;填料装得不密实,留有缝隙;二级分布槽变形等.针对存在问题提出了相应的整改措施,并考察了整改措施实施效果.结果表明,整改后该塔的分离能力满足了工艺要求,并有一定的操作弹性.     

Dispersion—flocculation studies on a Goethite-clay system

Dispersion–flocculation studies on a Goethite–clay system using flocculants were carried out as a function of flocculant concentrations, pH of slurry, time of agitation and dispersant dosage. Also, the effects of pH and polymer concentrations on the adsorption behaviour of the system were investigated. Results show that well flocculated goethite was preferentially obtained from 4% goethite/kaolinite clay suspensions, with 50 ppm causticised starch in the slurry at pH values of 3–11·5 and with 50 ppm polyacrylamide at pH values of 3–8. Good flocs were also obtained on flocculation of the goethite suspension with 50 ppm polyacrylamide at pH values of 5–7, while the kaolinite suspension did not respond to the same dosage of causticised starch in the same pH range. Results further reveal that for the goethite/kaolinite suspension, the best results was obtained with 50 ppm polyacrylamide at pH values of 7–10. Based on the data generated in the study, it was concluded that causticised starch is a better flocculant than polyacrylamide for goethite suspensions although polyacrylamide is an excellent flocculant for kaolinite suspensions.     

Enantioselective extraction of mandelic acid enantiomers based on chiral ligand exchange

Based on the chiral ligand exchange, the distribution behavior of mandelic acid enantiomers, and the partition of Cu^2 at different pH values were studied in a water/alcohol two-phase system containing Cu^2 and N-ndodecyl-L-proline(A). The influences of the solvent sort, the pH value, the concentrations of Cu^2 and chiral ligand on the partition coefficient(K) and separation factor(α) were discussed. The experimental results show that the A formed has more stable ternary complex with D-mandelic acid enantiomer than with L-mandelic acid enantiomer. There is an important influence of the pH value on K and a. When the pH values are less than 3.5, the formation of binary complexes is thermodynamically unfavourable. K and a become maximum when pH values are above 3.5 and the molar ratio of the chiral ligand to Cu^2 is 2:1.     

Adsorption and decomposition of H2S on Pd(1 1 1) surface: a first-principles study

Gradient-corrected density functional theory was used to investigate the adsorption of H₂S on Pd(1 1 1) surface. Molecular adsorption was found to be stable with H₂S binding preferentially at top sites. In addition, the adsorption of other S moieties (SH and S) was investigated. SH and S were found to be preferentially bind at the bridge and fcc sites, respectively. The reaction pathways and energy profiles for H₂S decomposition giving rise to adsorbed S and H were determined. Both H₂S_(ad) → SH_(ad) + H_(ad) and SH_(ad) → S_(ad) + H_(ad) reactions were found to have low barriers and high exothermicities. This reveals that the decomposition of H₂S on Pd(1 1 1) surface is a facile process.     

锆钡镧铝氟化物玻璃的分相研究

本文综述了氟化物玻璃中的分相研究。在前人研究基础上应用透射电镜，X射线能谱，电子能量损失谱及X射线衍射，差热分析等研究了锆钡镧铝氟化物玻璃中的液-液分相，发现此种现象普遍存在于该类玻璃之中。对玻璃成分与分相形貌及微观结构之间的关系、对析出晶相种类及分相与析晶的相互影响进行了研究。提出欲降低氟化物玻璃的光损耗，分相与析晶一样是不容忽视的因素。     

Synthesis and characterization of radiation grafted copolymer for removal of nonionic organic contaminants

Nonionic organic contaminants such as phenol, benzene, and toluene from contaminated wastewater on laboratory scale can be effectively sorbed by cellulosic wood pulp sheet incorporated with three polar functional groups. The synthesis was carried out by graft copolymerization reaction of N,N‐dimethylaminoethylmethacrylate with methacrylic acid onto wood pulp. The preparation conditions at which the grafting process proceeds homogeneously are determined. Characterization and some selected properties of the original and grafted wood pulp were evaluated using FTIR and scanning electron microscope, also, the removal of phenol, benzene, and toluene on laboratory scale was investigated by using gas chromatography. It was found that phenol shows the highest removal percent than that of benzene and toluene. The efficiency of removal of the nonionic contaminants is found to be 97%, which shows a great promise for its applicability in the removal of organic contaminates from wastewater. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3589–3595, 2006     

Application of the blind source separation method to feature extraction of machine sound signals

As the result of vibration emission in air, a machine sound signal carries important information about the working condition of machinery. But in practice, the sound signal is typically received with a very low signal-to-noise ratio. To obtain features of the original sound signal, uncorrelated sound signals must be removed and the wavelet coefficients related to fault condition must be retrieved. In this paper, the blind source separation technique is used to recover the wavelet coefficients of a monitored source from complex observed signals. Since in the proposed blind source separation (BSS) algorithms it is generally assumed that the number of sources is known, the Gerschgorin disk estimator method is introduced to determine the number of sound sources before applying the BSS method. This method can estimate the number of sound sources under non-Gaussian and non-white noise conditions. Then, the partial singular value analysis method is used to select these significant observations for BSS analysis. This method ensures that signals are separated with the smallest distortion. Afterwards, the time-frequency separation algorithm, converted to a suitable BSS algorithm for the separation of a non-stationary signal, is introduced. The transfer channel between observations and sources and the wavelet coefficients of the source signals can be blindly identified via this algorithm. The reconstructed wavelet coefficients can be used for diagnosis. Finally, the separation results obtained from the observed signals recorded in a semi-anechoic chamber demonstrate the effectiveness of the presented methods .     

Effects of multiple weak interactions on the binding of phenolic compounds by polymeric adsorbents

To investigate the effects of multiple weak interactions on the binding of phenolic compounds by polymeric adsorbents, macroporous polystyrene (PS) resin and PS‐based adsorbents with different hydrogen‐bond acceptor atoms (PS CH₂( OCH₂CH₂)_n OCH₃, n = 0, 1, 2, and 3, denoted as PS‐EG₀, PS‐EG₁, PS‐EG₂, and PS‐EG₃) were prepared. The phenol adsorption strength order on these adsorbents was PS/PS‐EG₀ < PS‐EG₁ < PS‐EG₂ < PS‐EG₃, indicating that the adsorption on PS and PS‐EG₀ was driven by hydrophobic and π–π interactions, and the adsorption on PS‐EG₁, PS‐EG₂, and PS‐EG₃ was driven by a hydrogen bond in addition to hydrophobic and π–π interactions. PS‐EG₂ may adsorb a second phenol molecule on each binding site and PS‐EG₃ may adsorb second and third ones. The adsorption strength of resorcinol increased in the order of PS, PS‐EG₁, and PS‐EG₂, indicating that the adsorption was driven by 0, 1, and 2 hydrogen bonds in addition to hydrophobic and π–π interactions. Similarly, the adsorption of phloroglucinol on PS, PS‐EG₁, PS‐EG₂, and PS‐EG₃ was driven by 0, 1, 2, and 3 hydrogen bonds in addition to hydrophobic and π–π interactions because the adsorption strength increased in this order. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4652–4658, 2006