基于随机相位误差Tikhonov分布的MC-DS-CDMA系统性能分析

本文针对工作于慢变频率选择性Rayleigh衰落信道中的部分相干的MC-DS-CDMA系统，基于随机相位误差的Tikhonov密度分布提出了误码率上边界的一种分析方法。仿真结果表明，随着环路信噪比的增加，相位误差损耗所产生的系统误码率性能损失变得越来越小，当环路信噪比高于系统信噪比(Eb/N0)20dB时，系统误码率性能损失小于0．2dB。在MC-DS-CDMA系统中，由于能用频率分集取代路径分集，因而接收机结构更易实现。     

Two‐phase production of cyclohexene and cyclooctene oxides in water as an approach to pollution prevention

Liquid–liquid two‐phase epoxidation from cyclohexene and cyclooctene in aqueous potassium peroxymonosulfate (commercially available as Oxone^®) solution was studied as an application in pollution prevention. To avoid potential emissions of volatile organic compounds an aqueous solution was employed to replace the usual chlorinated solvents used in epoxide production. A droplet column reactor and stirred tank reactor were used to investigate two‐phase synthesis of epoxide. An aqueous Oxone^® solution was used to oxidize a dispersion of alkene droplets and form epoxide. The study of aqueous epoxidation in both reactors showed that the epoxidation of alkenes can be represented as a first order reaction with respect to alkene. The salting out effect of Oxone^® concentration was studied in both reactors and found to be very similar at optimal conditions. In comparing the two reactors, it was found that the droplet column reactor produces larger quantities of product per unit reactor volume for the same reaction time. The objective of this study is to provide an alternative reactor design and synthesis route that can meet pollution prevention goals. Copyright © 2004 Society of Chemical Industry     

GM300电台的调试原理及方法

GM300电台是一种性能优良的电台，目前在我国的地震勘探领域广泛应用。与其它类型的电台相比，GM300电台的调试方法完全不同。掌握其调试原理及方法是对该类电台进行正确维护的基础。本文从分析GM300电台调试原理入手，总结了该电台的调试方法。     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

C2 用于声化学研究的大功率超声系统的研制

根据声化学反应的特殊要求，我们研制了上前用于声化学研究的大功率超声系统，由参数可调节的超声发生器配合不同频率的换能器工作，并用它组合成杯式幅杆结构声化学反应器，解决了有关声化学设备的一些技术问题。为声化学技术从实验室规模向工业应用过渡做了必要的准备。     

钠冷快堆中喷雾钠火的计算分析

根据钠冷快堆中喷雾钠火的特点建立了理论模型，编制了SSPRAY程序。该程序模拟钠喷雾燃料过程中钠滴的运动、钠和氧气的燃烧反应、热量传递和质量传递等瞬态过程。用该程序计算了气体和墙壁温度、气体压力、氧气摩尔份额、喷雾流燃烧速率和热量热递速率等主要参数。利用AI实验数据和美国SPRAY－3A的计算结果对程序进行了验证，结果符合较好。     

槽孔式水力驱动控制棒槽孔阻力系数实验研究

对槽孔式水力驱动控制棒槽对孔阻力系数进行了大量实验研究，获得了槽孔式水力驱动控制棒槽对孔阻力系数和其随槽对孔位移的变化规律，分析了槽对孔阻力系数与控制棒槽对孔结构参数之间的关系。结果表明：随槽对孔位移的增加，槽对孔阻力系数从某一较大的定值迅速降低到某一较小的定值，然后再迅速反回到初始的定值，形成一个对称的宽幅波谷；槽高使阻力系数曲线波谷幅宽发生变化，也使完全不重合段的阻力系数发生变化；随内套孔径的增大，阻力系数有所降低，其对阻力系数的影响也进一步减弱。孔径增大到一定程度，阻力系数基本不受孔径参数的影响。     

中国先进研究堆导流箱流场的数值模拟

采用目前国内普遍使用的计算流体力学 (CFD)软件PHOENICS 3 2对中国先进研究堆不同结构的导流箱的三维流场进行数值模拟计算。结果表明 :导流箱入口导流板和导流筒能显著改善导流箱入口冷却剂的流动状况 ,获得入口冷却剂沿周向均匀分流的效果 ,达到显著减缓入口冷却剂对垂直辐照孔道导管及安全棒导管直接的横向水力冲刷的设计目的     

无线电测控系统中三元码跟踪双环的研究

本文提出了数字遥测信号与模拟图象信与混合的无线电测控系统中用于捕获和跟踪带钟复合码的跟踪双环方案，分析了双环系统的捕获性能，理论分析和实验结果表明，双环系统不仅捕获时间短，而且具有强的抗干扰能力。     

CNC中插补和轴伺服的微机仿真

本文级出了在ＰＣ机上对一个自己开发ＣＮＣ系统插祉和轴伺服控制进行仿真的结果。它包含按插补原理对直线、圆和渐开线的插补以及对轴伺服控制中的位置环和前馈控制的仿真。轴伺服马达通过一个二阶连续系统模型来仿真，最后得出对伺服进行前馈控制补偿可显著改善系统的输出。