金属有机骨架材料Fe3O4@ZIF-8作为药物载体的研究

以FeCl_3·6H_2O、乙酸钠、Zn(NO_3)_2·6H_2O、2-甲基咪唑为主要原料,通过水热法合成磁性金属有机骨架材料(Fe_3O_4@ZIF-8),对其进行了FTIR、VSM、SEM、TEM和EDS表征。以材料作为药物载体负载四环素,以负载量作为主要评价指标,考察了振荡时间、Fe_3O_4@ZIF-8用量、四环素溶液pH、四环素初始质量浓度对四环素负载量的影响。结果显示:在涡旋振荡90 s、pH=9、Fe_3O_4@ZIF-8用量5 mg、四环素质量浓度30 mg/L条件下,四环素饱和负载量达到12.296 mg/g。重复利用实验结果表明,Fe_3O_4@ZIF-8材料至少可以重复利用6次。     

高压开关柜面板设计的神经网络方法

应用反向传播神经网络(BP网络)进行模式识别,实现了开关柜面板的自动布置,是将人工神经网络应用于电器CAD领域的一次初步尝试。     

Supramolecular Capsules Derived from Resorcin[4]arenes by H-Bonding and Metal Coordination: Synthesis,Characterization, and Single-Molecule Force Spectroscopy

Self-assembly by H-bonding and by metal-coordination of functionalized calix[4]arenes and cavitands to large supramolecular capsules is described. In addition, a new method of analyzing supramolecular recognition processes at the single molecule level is discussed. By measuring interaction forces in a hydrogen-bonded assembly using single-molecule force spectroscopy (SMFS), the dynamics of the self-assembly process can be evaluated. In the future, consequent application of this new technique will influence supramolecular design principles and the use of non-covalent interactions as construction elements in the field of nanotechnology.     

Effect of activation temperature on the surface copper particles and catalytic properties of Cu–Ni–Mg–Al oxides from hydrotalcite-like precursors

The Cu–Ni–Mg–Al oxides catalysts for furfural hydrogenation were prepared from the hydrotalcite-like precursors, and the effect of activation temperature on the Cu⁰ particles and catalytic properties of the catalyst was thoroughly investigated. The catalyst activated by H₂ at 300 °C was found to exhibit the best catalytic activity, due to the presence of the smallest Cu⁰ particles with a high dispersion. Moreover, the bigger Cu⁰ particles were active for furfuralcohol hydrogenolysis to 2-methylfuran in the liquid-phase (ethanolic solution), and the hydrogenation of the furan ring of furfuralcohol and 2-methylfuran on Cu⁰ particles was easily achieved in the vapour-phase.     

基于金属应变计的便携式血管阻断拉力仪

在生物、医学研究采用两血管阻断法(2-VO)建立脑缺血模型过程中,由于对动脉的非量化结扎,导致模型建立的重复性较差,组内个体差异较大且死亡率较高.本文以金属应变计为核心元件设计了血管阻断拉力仪,实现对结扎力的量化检测.从体外、体内两个层面以及体内的细胞分子水平、组织器官水平和整体水平进行生物学实验验证.结果表明:该拉力仪线性度、灵敏度受金属应变计基底参数、胶接工艺、电路参数、外观结构等因素影响;与非仪器结扎组比较,脑缺血模型动物死亡率降低了42.22%.实验动物脑血流量下降程度与结扎力递增呈对应关系;海马组织苏木素-伊红(HE)染色后光镜检测发现神经元排列松散,神经元数量减少乃至消失,神经元胞浆染色变淡及齿状回出现神经元固缩.不同结扎力组间比较显示,1.5 N组内大鼠海马组织形态个体差异最小;Morris水迷宫结果显示,与假手术组比,1.5 N结扎组、2.5 N结扎组大鼠逃避潜伏期显著增加(P0.05),且1.5 N结扎组大鼠站台穿越次数显著下降(P0.05),出现了明显的学习记忆障碍.证伪了实验室前期实验中2-VO大鼠结扎力越大,结扎效果越佳的理论.得出结扎力标准偏差越小结扎效果越好,且结扎力量化可控的结论.该血管阻断拉力仪应用于医药学基础实验研究具有重要意义.     

直立锁缝屋面系统风致破坏全过程研究

直立锁缝屋面系统广泛应用于厂房、车站、体育场馆等大型建筑中,但由于自重轻、柔性大,在强风作用下很容易发生局部损伤及整体破坏,探讨这类屋面系统的风致破坏模式和失效机理,以便提出有效的抗风措施很有必要.本文进行了足尺试验并结合精细有限元方法,对直立锁缝屋面系统在风荷载作用下的变形发展,直到局部屈曲,再到最终破坏的全过程进行...     

浅谈电力行业金属监督质量管理的优化

如何通过金属监督质量管理的优化创新来更好地服务当前电力设备材料等级越来越高的需求,已经成为目前电力行业内金属监督质量管理工作面临的一项挑战性课题。文章主要分析了现阶段电力行业金属监督质量管理工作中普遍存在的问题、不足和难点,并明确金属监督质量管理工作的基本要求,最后提出了金属监督质量管理工作优化的相关措施,对电力行业金属监督质量管理工作提供有助益的参考。     

Comparative Study on Microstructures of Zincalume Steel (G550) Welded Joint Between Metal Inert Gas and Laser Beam Welding

Zincalume steel (G550) is commonly used in various construction fields because of its high corrosion resistance and good mechanical properties. In recent years, a number of steel companies have massively produced zincalume steel (G550) with large volumes of waste. For the reduction of massive industrial wastes, the zincalume steel (G550) was welded in the lap joint configuration using different welding parameters in the metal inert gas (MIG) welding and laser beam welding (LBW) process in this study. The MIG welding and LBW are more welcomed welding methods due to their high efficiency and low cost. However, they are different as the LBW offers welding speed three to five times faster than MIG welding, while LBW’s heat transfer to workpieces is much less than MIG welding, which can avoid some distortions. The microstructure of zincalume steel (G550) was investigated using scanning electron microscopy (SEM) and the microstructure characterizations of welded specimens were analyzed. The experiment found the columnar dendrites extended under the heat flow direction during the MIG welding and LBW process. Thus, the columnar grains were formed in between the equiaxed zone and fusion zone (FZ) at high heat input and slow cooling rate. Moreover, the grain size of FZ was comparatively smaller than heat affected zone (HAZ) and base metal (BM).     

等温核酸放大技术在重金属检测方面的应用

等温核酸放大技术是一种可以实现重金属污染物痕量分析的高灵敏性检测方法,在分析检测中有着广泛且重要的作用。本文综述了几种不同的等温核酸放大技术及其在重金属检测方面的应用,阐述分析了各方法的检测原理,为之后建立更加灵敏、快速、准确的检测方法提供了参考。虽然等温核酸放大技术目前主要停留在实验室阶段,并且检测目标有限,但是由于该技术的高灵敏性、特异性以及与其他学科紧密的联系性,具有潜在的应用前景。     

面向平板结构钙钛矿太阳能电池的金属氧化物综述

作为平板结构钙钛矿太阳能电池的电荷传输层,金属氧化物薄膜对器件性能有重要影响. 系统性概述平板结构钙钛矿太阳能电池对金属氧化物薄膜形貌、电学、光学、化学及热等物理特性要求,并对目前在高效钙钛矿太阳电池制备中最有前景的金属氧化物电子传输层及空穴传输层材料特性及代表性工作进行总结. 针对大多数金属氧化物迁移率低、表面缺陷多及能级匹配差的问题,分析元素掺杂、表面改性、复合薄膜设计等手段解决的相关进展. 总结目前金属氧化物薄膜沉积技术现状及优缺点,探讨今后薄膜沉积技术发展、改进方向. 对低温沉积金属氧化物薄膜在柔性器件方面的应用进行展望.