烯烃均相茂金属催化技术的工艺条件

烯烃均相茂金属催化技术的工艺条件潘智达孙俊全杨士林（浙江大学高分子科学与工程系，杭州３１００２７）ＰａｎＺｈｉｄａ，ＳｕｎＪｕｎｑｕａｎａｎｄＹａｎｇＳｈｉｌｉｎ（ＤｅｐａｒｔｍｅｎｔｏｆＰｏｌｙｍｅｒＳｃｉｅｎｃｅａｎｄＥｎｇｉｎｅｅｒｉｎｇ，Ｚｈ...     

多维气相色谱快速测定汽油中的烯烃、芳烃和苯含量

针对车用无铅汽油国家标准GB17930-1999中对烯烃，芳烃和苯含量提出的明确限值要求，以及现有标准方法和其它分析技术在分析汽油组成时存在的问题，结合国外汽油分析的发展趋势及我国汽油生产的工艺和汽油组成分布特点，提出了一套新的多维气相色谱技术测定汽油中烯烃。芳烃和苯含量的方法。并研制了新的烯烃捕集阱，可捕集汽油中高达70%的烯烃，且具有良好的可逆性和使用寿命，提出的方法可以在12min内通过一次色谱进样实现汽油中烯烃总量，芳烃总量和苯含量的测定。试验结果与荧光指示剂吸附法（FIA，GB/T11132-1989）相比具有很好的一致性。但分析速度和方法的再现性得到明显改善。试验成本也大大降低。     

甲醇制烯烃技术进展

阐述了甲醇制低碳烯烃各个工艺的研究进展,从甲醇制乙烯、甲醇制丙烯和甲醇制丁烯三个方面对比了各自技术特点,指出未来需开发出以丙烯、 C₄烯烃为主产品的新技术。     

Air Filtration and Radon Decay Product Mitigation

Air cleaning as a means of mitigating the risks arising from exposure to indoor radon progeny has been evaluated in a single-family house in the north eastem US. using an automated, semi-continuous activity-weighted size distribution measurement system. The measurements included radon concentration, condensation nuclei count, and activity-weighted size distribution of radon decay products. Measurements were made in the house with and without an operating air filtration system and with various particle sources common to normal indoor activities operating. Aerosols were generated by running water in a shower, candle burning, cigarette smoking, vacuuming, opening doors, and cooking. Using a room model, the changes in attachment rates, average attachment diameters, and deposition rates of the unattached fraction with and without the air cleaning system were calculated. In the presence of active aerosol sources, the air filtration unit typically reduced the concentration of particles within the hour following the end of particle generation. After candle burning, cigarette smoking, and vacuuming in the bedroom, the reductions of PAEC by air filtration are about 60% with the air filtration system operating in the bedroom. During cooking in the kitchen, the reductions of PAEC in the bedroom with the air filtration system were about 40%. However, for all cases the dose reductions were smaller than the particle and PAEC reductions. For those particles that were generated within the bedroom, there was a 20% to 50% reduction in dose. In the case of cooking where the door was open and particles infiltrated from the rest of the house, the dose reduction was only 5% on average and appears to be insignificant. Thus, the dose reductions were h e r than the reductions in activity concentration, but there were no cases where the estimated dose actually increased.     

采用先进技术提高装置运行水平

介绍了中国石油化工股份有限公司高桥分公司 1.4Mt/a同轴式重油催化裂化装置的特点和生产情况。为了满足市场需求 ,提高经济效益 ,几年来在该装置上又采用了一些新技术 ,使装置的运转水平进一步提高。如应用降烯烃催化剂GOR Q ,与使用MLC 5 0 0催化剂相比 ,汽油烯烃体积含量约 30 % ,下降 8～ 10个百分点 ;汽油辛烷值基本不变 ;产品分布改善 ;液体收率增加 ;柴油性质变化不大。又如最大量烷烃异构化 (MIP)新型提升管反应系统的应用 ,与常规催化裂化相比 ,产品分布相当 ,汽油的烯烃体积含量下降至 30 %～ 35 % ,MON增加 0 .5～ 0 .8个单位 ,RON下降幅度不大于 0 .5个单位     

膜法烯烃/烷烃气体分离的研究进展

对烯烃/烷烃气体分离技术的现状进行了总结，阐述了膜法烯烃/烷烃气体分离的研究进展、分离原理及存在的问题等．同时展望了膜技术应用于烯烃/烷烃气体分离的前景及研究方向．     

EFFECT OF THE RATIO Th/U ON TL DATING ACCURACY

ＥＦＦＥＣＴＯＦＴＨＥＲＡＴＩＯＴｈ／ＵＯＮＴＬＤＡＴＩＮＧＡＣＣＵＲＡＣＹ￥Ｐ．Ｌ．Ｌｅｕｎｇ（梁宝鎏）；ＭｉｃｈａｅｌＪ．Ｓｔｏｋｅｓ（ＤｅｐａｒｔｍｅｎｔｏｆＰｈｙｓｉｃｓａｎｄＭａｔｅｒｉａｌｓＳｃｉｅｎｃｅ，ＣｉｔｙＰｏｌｙｔｅｃｈｎｉｃｏ...     

OCT-M 汽油选择加氢工艺工业应用

介绍了OCT-M汽油选择性加氢技术在汽油加氢装置的应用情况。对影响加氢汽油质量的主要因素进行了分析，提出了降低加氢过程汽油辛烷值损失、降低大分子硫醇生成的优化措施，并针对存在的问题提出了相应的改进建议。     

有机镍化合物催化烯烃聚合的研究进展

综述了有机镍化合物如烯丙基镍、乙酰丙酮镍、茂镍、二亚胺镍等催化烯烃聚合的研究进展。有机镍化合物可催化烯烃、α-烯烃(如乙烯、丙烯等)的齐聚及聚合、催化极性单体(如甲基丙烯酸甲酯、降冰片烯等)以及位阻较大的环烯烃、取代二烯烃、苯乙烯等的均聚和共聚。     

降低汽油烯烃含量裂化催化剂LBO-12的研制与开发

探讨了催化裂化过程降低汽油烯烃的反应原理，研究了催化剂各组分对裂化汽油性质影响的规律性，围绕提高氢转移活性，提出制备降烯烃裂化催化剂的技术路线，并研制开发了新型LBO-12降烯烃催化剂，固定流化床反应器对中试样品的评价和工业应用结果表明，该催化剂在不损失汽油辛烷值的前提下，降低催化裂化汽油烯烃能力较强，并具有较高的水热活性稳定性和良好的抗重金属污染特性。