高炉铁水含硅量的混沌局部线性预测

对莱钢1号高炉(750 m3)、临钢6号高炉(380 m3)铁水含硅量([Si])进行了混沌局部线性预测.结果表明,两 座高炉[Si]的一步预测的命中率在[Si]±0.1％的范围内均达到80.0％以上,对莱钢1号高炉(b)类样本甚至达89.1％,且预 测精度在10-2数量级,对实际生产具有很好的指导作用.     

Ce对过共晶Al—Si合金熔体粘滞性和结构的影响

研究了Ce对Al—16％Si合金熔体粘滞性的影响。结果表明：Ce的加入增加了合金熔体的粘度，且随着Ce含量的增加粘度值也增加。结合加入Ce的Al—16％Si合金氢含量的变化、凝固组织和DSC曲线研究了熔体结构的变化，分析了粘度与液态结构变化之间的关系。     

Cu-Al-Be形状记忆合金的应力腐蚀性能

用恒载荷法和慢应变速率法及SEM研究了Cu-Al-Be形 状记忆合金在甘油、海水和氨介质中的应力腐蚀性能.结果表明，Cu-Al-Be合金具有良 好的抗海水应力腐蚀性能和较低的氨介质应力腐蚀倾向.单相马氏体有较 好的耐海水腐蚀能力，可减少腐蚀引起的裂纹源；外应力下马氏体的孪晶变形和变体间的界 面迁移，则有利于松弛应力集中，阻碍和延缓腐蚀裂纹源的扩展，从而提高Cu-Al-Be合金的 应力腐蚀能力.     

多元酚——甲醛树脂中游离酚,游离醛含量的测定

多元酚－－甲醛树脂是本院开发的热固粘接剂新产品，本文给出了这一产品技术指标中游离酚、游离醛含量的测定方法，并对方法进行了讨论。     

Fluorinated Polyphosphazenes: A Survey

A general survey of fluorinated phosphazene polymers starting from their synthesis in 1965 to recent times is presented. Various types of fluorinated phosphazenes are described depending on the way fluorine atoms are connected to the polyphosphazene skeleton. The characterization, properties and practical utilization of these compounds in different domains are critically discussed.     

B113－2型低汽／气比CO高温变换催化剂的研制

介绍了Ｂ１１３－２Ｍ低汽／气比ＣＯ高温变换催化剂的研制方法及其特点．实验室测试表明，Ｂ１１３－２型催化剂具有堆密度低、运行强度高、选择性好、抗沸水性能优、本体含硫低及低温活性好等优点．     

工业石蜡的结构分析

采用核磁共振（NMR），红外吸收光谱（IR）和色－质联用（GC－MS）方法，测定了弓弩用工业石蜡的^13C-NMR谱、反转门控^13C-NMR谱、IR光谱、气相色谱和各组分的质谱，确定了该石蜡9种主要组分及其相对含量。     

Enhancement by SO2 of initial activity for selective catalytic reduction of NO with CH3OH over \gamma-alumina

The effect of SO₂ on catalytic activity for NO reduction to N₂ by methanol in excess oxygen over $\gamma$ -alumina has been investigated. SCR activity increased initially upon exposure of a fresh $\gamma$ -alumina catalyst to SO₂ which is attributed to formation of Brønsted acid sites. Longer exposure to SO₂ leads to a decline in catalytic activity to a lower steady-state NO_x reduction activity which is independent of the SO₂ content in the feed gas.     

Analysis of the Thermal Explosion in Systems Porous Reagent–Active Gas–Solid Product

The specific features of dynamics of the thermal explosion in systems porous reagent–active gas–solid product under conditions where the heattransfer and masstransfer regions are separated from the ambient medium are considered. In addition to the competition of heat release and heat removal, the process of initiation of exothermal chemical interaction in these systems under normal pressures depends significantly on conditions of filtration transport of the gaseous reagent. The induction and postinduction periods of the thermal explosion are studied. The theoretical analysis of thermalexplosion issues is supplemented by an experimental study of the process for the porous titanium–nitrogen–titanium nitride system.     

关于生产精制元明粉的探讨

介绍了以山西运城南风自产芒硝为原料生产精制元明粉的几种工艺,以及国内外精制元明粉的市场及生产状况.精制工艺包括化学除杂法、原料优选法、重结晶法.结果表明,精制元明粉的生产过程实质是一个除杂、提纯过程：对于钙离子含量高的原料,可采用化学除杂法;对于氯离子含量高的原料,可采用氯离子富集法、冷冻法或洗涤法;镁离子较难去除,可采用水硝洗涤、冷冻法.