含季铵盐聚合物丙烯酸酯共混防污涂料的制备与性能

用溶液聚合法合成了甲基丙烯酰乙基三甲基氯化铵(DMC)-甲基丙烯酸缩水甘油醚(GMA)-丙烯酸乙酯含季铵盐聚合物(QASP)的丙烯酸酯共聚物,并将合成的含季铵盐的丙烯酸酯共聚物和气相二氧化硅触变剂、氧化亚铜防污剂碾磨混合均匀得到共混物防污涂料。测试结果表明:随着共混物涂料中DMC用量的增加,涂层的抗拉强度先增加后降低,剪切强度降低,亲水性增强,有利于阻抗蛋白质的吸附;涂层吸水率的温敏性较强;防污涂料中铜离子渗出率在达到峰值后还能保持在比较高的水平,对于防污有效。     

水热法以磷铁制备电池级磷酸铁的研究

采用水热法,以磷铁、磷酸、硝酸为原料制备电池级磷酸铁,并利用扫描电镜(SEM)、XRD、红外光谱(FTIR)、TG-DSC以及电化学测试等手段,表征产品的形貌、晶体结构、分子结构和电化学性能,研究了反应过程中硝酸浓度、反应温度、时间及体系浓度对产品性能的影响。实验结果表明:以磷铁为原料,用水热法在一定实验条件下制备的FePO_4·2H_2O产品为正磷酸铁,且产品中含有多种微量金属元素,这有效利用了磷铁中的微量元素,改善了磷酸铁及后续制备的磷酸铁锂的电化学性能。以此为原料通过高温固相法合成的LiFePO_4/C的首次放电容量为148.9mAh/g,具有良好的电化学性能。     

Nanostructured Li3V2(PO4)3 Cathodes

To further increase the energy and power densities of lithium‐ion batteries (LIBs), monoclinic Li₃V₂(PO₄)₃ attracts much attention. However, the intrinsic low electrical conductivity (2.4 × 10^?7 S cm^?1) and sluggish kinetics become major drawbacks that keep Li₃V₂(PO₄)₃ away from meeting its full potential in high rate performance. Recently, significant breakthroughs in electrochemical performance (e.g., rate capability and cycling stability) have been achieved by utilizing advanced nanotechnologies. The nanostructured Li₃V₂(PO₄)₃ hybrid cathodes not only improve the electrical conductivity, but also provide high electrode/electrolyte contact interfaces, favorable electron and Li⁺ transport properties, and good accommodation of strain upon Li⁺ insertion/extraction. In this Review, light is shed on recent developments in the application of 0D (nanoparticles), 1D (nanowires and nanobelts), 2D (nanoplates and nanosheets), and 3D (nanospheres) Li₃V₂(PO₄)₃ for high‐performance LIBs, especially highlighting their synthetic strategies and promising electrochemical properties. Finally, the future prospects of nanostructured Li₃V₂(PO₄)₃ cathodes are discussed.     

Electrochemical Behavior of Single CuO Nanoparticles: Implications for the Assessment of their Environmental Fate

The electrochemical behavior of copper oxide nanoparticles is investigated at both the single particle and at the ensemble level in neutral aqueous solutions through the electrode‐particle collision method and cyclic voltammetry, respectively. The influence of Cl^? and NO₃^? anions on the electrochemical processes occurring at the nanoparticles is further evaluated. The electroactivity of CuO nanoparticles is found to differ between the two types of experiments. At the single‐particle scale, the reduction of the CuO nanoparticles proceeds to a higher extent in the presence of chloride ion than of nitrate ion containing solutions. However, at the multiparticle scale the CuO reduction proceeds to the same extent regardless of the type of anions present in solution. The implications for assessing realistically the environmental fate and therefore the toxicity of metal‐based nanoparticles in general, and copper‐based nanoparticles in particular, are discussed.     

Thermodynamic studies on the complete phase diagram of aqueous two phase system containing polyethylene glycol dimethyl ether 2000 and di-potassium hydrogen phosphate at different temperatures

The liquid-liquid equilibrium of polyethylene glycol dimethyl ether 2000 (PEGDME₂₀₀₀)+K₂HPO₄+H₂O system has been determined experimentally at T=(298.15,303.15,308.15 and 318.15) K. The liquid-solid and complete phase diagram of this system was also obtained at T=(298.15 and 308.15) K. A nonlinear temperature dependent equation was successfully used for the correlation of the experimental binodal data. Furthermore, a temperature dependent Setschenow-type equation was successfully used for the correlation of the tie-lines of the studied system. Moreover, the effect of temperature on the binodal curves and the tie-lines for the investigated aqueous two-phase system have been studied. Also, the free energies of cloud points for this system and some previously studied systems containing PEGDME₂₀₀₀ were calculated from which it was concluded that the increase of the entropy is the driving force for formation of aqueous two-phase systems. Additionally, the calculated free energies for phase separation of the studied systems were used to investigate the salting-out ability of the salts having different anions. Furthermore, the complete phase diagram of the investigated system was compared with the corresponding phase diagrams of previously studied systems, in which the PEGDME₂₀₀₀ has been used, in order to obtain some information regarding the phase behavior of these PEGDME₂₀₀₀+salt+water systems.     

Fabrication and gas-sensing properties of hierarchically porous ZnO architectures

Hierarchically three-dimensional (3D) porous ZnO architectures are synthesized by a template-free, economical aqueous solution method combined with subsequent calcination. First, the precursors of interlaced and monodisperse basic zinc nitrate (BZN) nanosheets are prepared. Then calcination of the precursors produces hierarchically 3D porous ZnO architectures composed of interlaced ZnO nanosheets with high porosity resulting from the thermal decomposition of the precursors. The products are characterized by X-ray diffraction, thermogravimetric-differential thermalgravimetric analysis, scanning electron microscopy, transmission electron microscopy, and Brunauer-Emmett-Teller N₂ adsorption-desorption analyses. The BET surface area of the hierarchically porous ZnO nanostructures was calculated to be 12.8 m² g⁻¹. Compared with ZnO rods, the as-prepared porous ZnO nanosheets exhibit a good response and reversibility to some organic gases, such as ethanol and acetone. The responses to 100 ppm ethanol and acetone are 24.3 and 31.6, respectively, at a working temperature of 320 °C. These results show that the porous ZnO architectures are highly promising for gas sensor applications, as the gas diffusion and mass transportation in sensing materials are significantly enhanced by their unique structures. Moreover, it is believed that this solution-based approach can be extended to fabricate other porous metal oxide materials with a unique morphology or shape.     

Residual phosphate fertilizer compounds in soils

A variety of P compounds can accumulate in soils as residues of fertilizer and may influence soil test versus plant yield relationships. This work evaluates specific chemical extractants for their capacity to identify such Al, Fe and Ca phosphates in soils as a basis for increasing the precision of yield prediction. Aluminium phosphate, iron phosphate, calcium phosphate (apatite) and P sorbed onto gibbsite, goethite and calcite were added to four Western Australian lateritic soils. These soils were then subjected to sequential selective extraction using a modified Chang and Jackson procedure in order to evaluate the selectivity of these extractants for the different forms of P with the sequence of extraction: 1 M NH₄Cl, 0.5 M NH₄F, 0.1 M NaOH + 1 M NaCl, citrate-dithionite-bicarbonate (CDB), 1 M NaOH and 1 M HCl. The results show that the procedure is not sufficiently specific and thus might be of little value for estimating the forms and amounts of residues of phosphate rock fertilizers in soils.     

电炉法CS_2废气的治理

简介了电炉法CS2 废气吸附的原理及工艺流程 ,开辟了H2 S利用的新途径 ,具有较好的环境效益和经济效益     

磷酸酯类偶联剂对CaCO3／HDPE体系偶联效果的研究

研究了自制磷酸酯“W-893”偶联剂对轻质CaCO_3/HDPE的偶联效果。就力学性能(抗张强度、弯曲强度、冲击强度),流变学特性(流动曲线、表现粘度、剪切敏感性、温度敏感性、挤出胀大、压力振荡、熔体破坏)和比重测定的结果发现:“W-893”/CaCO_3/HDPE体系的冲击强度可以为HDPE(5000S)的2～3倍(325目),甚至3～4倍(1250目);弯曲强度提高33.3％,抗张强度下降2.5％,比铝酸酯、钛酸酯的偶联效果好。