染料及中间体生产中的治理方法三废(Ⅰ)

由于我国染料及中间体行业近三十年来发展迅猛,而染料企业大多数是小型厂,染料品种繁多,在化工系统中,这一行业目前几乎是污染最严重、污染面最大、治理最差的。同时,一些发达国家把污染重、难治理的产品关停,转向发展中国家生产,染料中间体便是其中之一。所以我国大量的小型乡镇企业治理难度就更大了。不同染料生产原料、工艺过程不同,所排“三废”即有共同的特性,又有各自特点,因此需要针对各自的不同分别处理。本文从废气、有机废液和废渣、废水三方面详细叙述了工业上常用的治理方法及适用条件。并例举了几类排放量较大的废水的治理方法。     

Chemical Reaction Engineering and Research and development of gas solid systems

A general procedure is proposed for innovative research and development of gas-solid reactor systems, with a brief explanation of the significance of each step in the procedureBased upon the contacting mode between gas and solid phases, as well as the ways of supplying thermal energy to the reacting regions, various types of gas-solid reactor systems are classified by using tables of so called “matrix” form, for thermal cracking and gasification of heavy oils, gasification of coal, gasification of solid waste, calcination of limestone, clinkering of cement and reduction of iron ore.The importance of fundamental concepts is emphasized for successful research and development by presenting several examples; namely, calcination of limestone, thermal cracking of heavy oils and gasification of solid waste materials.In connection with the direction in which fundamental research should be oriented, four primary ways of thinking are proposed, which can be applied to obtain innovative ideas for further research and development in this field.One example of the author's practical experience was selected to show the role of the fundamental research in the course of large scale development. Finally the author outlines the role of chemical reaction engineering to innovate the novel gas-solid reactor systems which may be inevitable for simultaneous solution of the three big E's; namely, Energy, Environment and Economy.     

电解法处理利福霉素SV钠废渣分离液的研究

根据电化学原理，采用电解法，利用铁屑与炭粒作电极，处理利福霉素SV钠药渣分离液，讨论各种因素对分离液污染物作效果的影响，COD去除率可达91．8％左右，脱色率可达95％左右。     

废旧轮眙回收利用现状和利用途径

针对废旧轮胎回收处理压力越来越大的难题，系统地分析了处理废旧轮胎的各种方法，对我国翻新轮胎，胶粉用于建筑市场、铺路建设，废胎直接用于热能市场等等的利与弊、现状与前景都做了较详细的论述。对废胎利用与管理上必要的立法问题对照国外先进国家的经验，提出了建设性的意见。     

钽平台-石墨炉原子吸收法测定高背景废水样品中的Cd、Pb

运用钽平台石墨管测定基体成分复杂的废水样品中的Cd、Pb元素,基本消除了基体残留影响和记忆效应,降低了背景吸收,提高了灵敏度。样品经超声波仪粉碎后直接进样,用校正曲线法测定,简化了操作步骤,减少了测定时间,延长了石墨管使用寿命。其测定值与石墨平台标准加入法测定值结果一致。样品回收率:Cd为96.9%～104%,Pb为98.2%～106%,Cd的相对标准偏差(RSD)为3.04%～4.24%,Pb的RSD为2.93%～6.53%。     

废橡胶再生技术研究进展

综述了废橡胶再生利用的技术和方法，介绍了废橡胶的物理再生、化学再生的再行剂和微生物再生方法及进展，并对化学再生助剂、植物再生剂和生物再生助剂的再生效果进行了系统评述。     

塑料的生命周期评价（LCA）

塑料的回收利用是近些年来再生资源研究的一个非常重要的方向。废旧塑料,尤其是消费后的废旧塑料是回收利用的重点。本文从回收方法和途径阐述了有关废旧塑料各类最新的塑料循环周期模型,进而说明积极的研究废旧塑料循环利用的新方法、新工艺具有十分重要的意义。     

金昌冶炼厂污酸污水处理装置简介

介绍了污酸污水处理装置的工艺流程、工艺特点和主要设备。来自净化工序的污酸脱出二氧化硫后进行两级石灰石乳中和生成石膏浆；石膏浆经浓密机沉降，底液经hrox压滤机脱水，浓密机上清液和压滤机滤液汇入石膏滤液槽与硫化钠反应生成硫化物沉淀；硫化物沉淀经浓密机沉降，底流经陶瓷过滤机过滤，滤液和浓密机上清液自流到污水处理工序进一步处理。来自污酸处理工序和各车间的污水混合后进行一级石灰乳中和、硫酸亚铁除砷、二级石灰乳中和，实现达标排放。运行3年来，污酸污水处理装置各项指标均达到设计要求。     

Dynamic reaction inside co‐rotating twin screw extruder. I. Truck tire model material/polypropylene blends

Waste ground rubber tire (WGRT) is a complex composite containing various elastomers, carbon black, zinc oxide, stearic acid, processing oils, and other curatives. Most of the waste ground rubber tire is composed of mainly natural rubber (NR) and styrene butadiene rubber (SBR) in varying proportions. Blending it with other thermoplastic materials is difficult due to the inherent thermodynamic incompatibility. But, the compatibility can be increased by making the reactive sites in WGRT with suitable chemicals under optimum condition of shearing inside a twin screw extruder and it is said to undergo a dynamic reaction inside the extruder. To understand the mechanism of dynamic reaction process of a rubber/polyolefin blend, the blending of a truck tire model material rubber with polyolefin was first tried before it was applied to waste WGRT material. It was observed that the blends of a truck tire model rubber material and PP thermoplastic are physical mixture of two incompatible polymers in which a continuous plastic phase is largely responsible for the tensile properties. The rubber particles are the dispersed phase. The large particle size and the poor adhesion of these rubber particles are believed to be liable for the poor tensile properties. In case of blends of truck tire model material with isotactic polypropylene the tensile properties are found to be lower than that of its PP‐g‐MA counterpart which can be attributed to the reaction of the MA with the carbon black particles. A schematic representation of the possible interactions has been proposed. The effect of addition of compatibilizers such as SEBS and SEBS‐g‐MA has also been studied. The tensile and TGA studies indicate that the polarity of SEBS and SEBS‐g‐MA induces an increase in the performance characteristics for both types of polyolefins but the intensity of this increase is higher in the PP‐g‐MA based blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 106: 3193–3208, 2007     

废弃木粉与短切玻璃纤维组合增强聚丙烯的力学性能

用废弃木粉与短切玻璃纤维作为增强材料，制得了组合增强的聚丙烯复合材料，研究了制备工艺及设备、材料配方及界面改性方法等对材料力学性能的影响。结果表明，用单螺杆挤出机制备组合增强材料，可减少对玻璃纤维的损伤，保持较长的玻璃纤维，有利于其增强作用的发挥；随着玻璃纤维含量的增加，体系的力学性能提高，而木粉含量对材料力学性能的影响与玻璃纤维的含量相关；采用硅烷偶联剂对木粉进行表面处理，在基体中添加接枝极性基团的改性聚丙烯，可改善体系的界面结合，提高力学性能。