强碱阴树脂硅污染的复苏

某除盐水处理系统强碱阴树脂被硅污染后,出水水质下降、周期制水量减少。为复苏被污染的强碱阴树脂,保证系统供水水质,采用了“再生碱液用量加倍、浓稀结合、多次再生”的方法对污染树脂进行了处理,最终污染树脂得到复苏,系统产水水质合格。实践证明该处理方法切实有效,结合实践分析研究了强碱阴树脂被硅污染的机理,提出了复苏方法和预防措施。     

生物降解材料聚羟基乙酸及其结晶性能研究

聚羟基乙酸(以下简称PGA)是一种单元碳数最少的脂肪族聚酯,集优异的气体阻隔性、生物兼容性和可降解性于一身,极具发展潜力的新型包装材料,也是较重要的医用生物降解材料。采用逐级提高真空度和逐级升温的先进工艺流程,选用高效、环保的新型络合钛溶液作为催化剂,直接缩聚法制备高分子量PGA,研究了PGA在DMSO中重结晶前后的性能特点及对比。     

扩散渗析法从钛白废酸中回收硫酸

针对钛白废酸的回收,在静态扩散条件下测定了硫酸、硫酸亚铁在阴离子交换膜中的渗析系数以考察膜的分离性能。进一步考察动态扩散操作参数如流量、流量比、停留时间等对回收率及回收酸浓度的影响。研究表明,使用的阴离子交换膜具有良好的分离性能,酸盐分离系数达23.6,在水酸流量比维持在1～1.1,废酸流量维持在0.6L·h-1左右的条件下,硫酸回收率大于85%,硫酸亚铁透过率小于7%。     

弱碱性阴离子交换树脂运行残余交换容量的经验公式

研究测定了各种运行条件下弱碱性阴离子交换树脂的残余交换容量，导出了根据层高、流向、流速、温度、进水酸度和二氧化碳及硫酸浓度等求残余交换容量的经验公式．     

Formation mechanism of barium titanate nanocrystalis under hydrothermal conditions

Growth units and the crystallization habit of BaTiO3 nanocrystals have been investigated. It has been proposed that the growth units of BaTiO3 were surface hydroxylated Ti(OH)62- octahedra. The relationship between crystal morphology and the variation of the current intensity in the solution has been obtained through the measurement of the OH in the solution and the hydrothermal experiment with superimposed direct electric field. Based on the computation of the stability energy of the growth units, the relationship between the crystallized morphology of crystallites and the most favorable growth units under different conditions has been derived. It has been found that there is structure similarity between anatase (TiO2) and BaTiO3 from the crystal chemistry viewpoint, so they are soluble in each other, which can serve as a reasonable explanation for the abnormal phenomenon of the retention of cubic substable phase at room temperature.     

正辛醇为稀释剂条件下二元羧酸的萃取平衡特性

以二元羧酸乙二酸、丙二酸、丁二酸、顺丁烯二酸和苹果酸为分离对象,三烷基氧膦（TRPO）为络合剂,正辛醇为稀释剂进行了系统的萃取相平衡实验.结果表明,溶质的pK_a1和羧酸的亲油性同时影响络合萃取平衡.红外光谱分析表明,萃取剂TRPO与正辛醇之间形成氢键,抑制了对羧酸的萃取,使得TRPO与有机羧酸之间形成1∶1的络合物;负载有机羧酸的红外谱图表明,TRPO萃取有机羧酸为氢键溶剂化历程,负载有机羧酸的TRPO中的P=O键吸收峰的位移与有机羧酸的酸性有关.采用质量作用定律分析方法建立了负载量的表达式,模型拟合精度令人满意.     

Anionic Clays as Potential Slow-Release Fertilizers: Nitrate Ion Exchange

Several nitrate containing anionic clays were synthesized at different temperatures and the kinetics of NO₃ ^– release were determined to test their suitability as slow-release N fertilizers. A sample (Mg:Al = 2:1) synthesized at 60°C with smaller particle size released 75, 86 and 100% of its NO₃ ^– in 1, 3 and 7 days, respectively when equilibrated with a simulated soil solution. On the other hand, the 175°C/2 hrs sample with larger particle size released 65, 77 and 84% of its nitrate in 1, 3 and 7 days, respectively. Another anionic clay (synthesized at 175°C/24 hrs) of higher charge density (Mg:Al = 2:1) containing NO₃ ^– was equilibrated with a 0.012 N NaCl or Na₂CO₃ to test the role of different anions in releasing the NO₃ ^– anion from the interlayers. The results showed that Cl^– released more NO₃ ^– than did CO₃ ^2– from this anionic clay after all the treatment times probably as a result of the CO₃ ^2– anion blocking the release of NO₃ ^– from the interior of the crystals. When a lower charge density (Mg:Al = 3:1) sample (synthesized at 175°C/48 hrs) was equilibrated with 0.02N solution of anions the release of nitrate was as follows: Cl^– < F^– < SO₄ ⁼ CO₃ ^2–. These results suggest that the divalent SO₄ ⁼ and CO₃ ^2– anions are more effective in the release of NO₃ ^– from this lower charge density anionic clay. Time-resolved structural analysis of NO₃ ^– exchange with CO₃ ^2– in the above anionic clay using synchrotron x-ray diffraction showed that ion exchange is rapid because of small crystal size and lower charge density. Thus the release of NO₃ ^– from anionic clays is an interplay among the type of anions present in soil solution, their concentration, pH of soil solution, the charge density and crystal size of anionic clay etc.     

Preparation and characterization of amphiphilic block copolymer of polyacrylonitrile‐block‐poly(ethylene oxide)

The synthesis of polyacrylonitrile‐block‐poly(ethylene oxide) (PAN‐b‐PEO) diblock copolymers is conducted by sequential initiation and Ce(IV) redox polymerization using amino‐alcohol as the parent compound. In the first step, amino‐alcohol potassium with a protected amine group initiates the polymerization of ethylene oxide (EO) to yield poly(ethylene oxide) (PEO) with an amine end group (PEO‐NH₂), which is used to synthesize a PAN‐b‐PEO diblock copolymer with Ce(IV) that takes place in the redox initiation system. A PAN‐poly(ethylene glycol)‐PAN (PAN‐PEG‐PAN) triblock copolymer is prepared by the same redox system consisting of ceric ions and PEG in an aqueous medium. The structure of the copolymer is characterized in detail by GPC, IR, ¹H‐NMR, DSC, and X‐ray diffraction. The propagation of the PAN chain is dependent on the molecular weight and concentration of the PEO prepolymer. The crystallization of the PAN and PEO block is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1753–1759, 2003     

Adsorption and separation of rhenium(VII) using N‐methylimidazolium functionalized strong basic anion exchange resin

BACKGROUND: Rhenium is a rare and valuable metal coexisting with molybdenum in molybdenite and sulfide copper ores and is hard to separate. Methods such as solvent extraction, ion exchange, adsorption, precipitation, etc. have been used to separate and purify Re(VII), and resin ion exchange has been widely investigated and used owing to its convenient operation and relatively low‐cost. The main challenge comes from the preparation of resins having high performance and stability. In an earlier study, an N‐methylimidazolium functionalized strong basic anion exchange resin was successfully synthesized and used for Cr(IV) extraction. This paper, reports on further synthesis and application of this resin for adsorption and separation of Re(VII) and Mo(VI), especially from copper arsenic filter cake. RESULTS: At pH 6.25, Re(VII) and Mo(VI) can be effectively separated with the N‐methylimidazolium functionalized strong basic anion exchange resin, giving a Re(VII) recovery of up to 93.3%, but only 5.1% for Mo(VI). When using the copper arsenic filter cake sample 89.1% Re(VII) recovery was achieved. CONCLUSION: The N‐methylimidazolium functionalized strong basic anion exchange resin exhibited high selectivity and recovery for Re(VII) in a mixed system. © 2012 Society of Chemical Industry